Something went wrong. Try again.
Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Something went wrong. Try again.
1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039104010411042104310441045104610471048104910501051105210531054105510561057105810591060106110621063106410651066106710681069107010711072107310741075107610771078107910801081108210831084108510861087108810891090109110921093109410951096109710981099110011011102110311041105110611071108110911101111111211131114111511161117111811191120112111221123112411251126112711281129113011311132113311341135113611371138113911401141114211431144114511461147114811491150115111521153115411551156115711581159116011611162116311641165116611671168116911701171117211731174117511761177117811791180118111821183118411851186118711881189119011911192119311941195119611971198119912001201120212031204120512061207120812091210121112121213121412151216121712181219122012211222122312241225122612271228122912301231123212331234123512361237123812391240124112421243124412451246124712481249125012511252125312541255125612571258125912601261126212631264126512661267126812691270127112721273127412751276127712781279128012811282128312841285128612871288128912901291129212931294129512961297129812991300130113021303130413051306130713081309131013111312131313141315131613171318131913201321132213231324132513261327132813291330133113321333133413351336133713381339134013411342134313441345134613471348134913501351135213531354135513561357135813591360136113621363136413651366136713681369137013711372137313741375137613771378137913801381138213831384138513861387138813891390139113921393139413951396139713981399140014011402140314041405140614071408140914101411141214131414141514161417141814191420142114221423142414251426142714281429143014311432143314341435143614371438143914401441144214431444144514461447144814491450145114521453145414551456145714581459146014611462146314641465146614671468146914701471147214731474147514761477147814791480148114821483148414851486148714881489149014911492149314941495149614971498149915001501150215031504150515061507150815091510151115121513151415151516151715181519152015211522152315241525152615271528152915301531153215331534153515361537153815391540154115421543154415451546154715481549155015511552155315541555155615571558155915601561156215631564156515661567156815691570157115721573157415751576157715781579158015811582158315841585158615871588158915901591159215931594159515961597159815991600160116021603160416051606160716081609161016111612161316141615161616171618161916201621162216231624162516261627162816291630163116321633163416351636163716381639164016411642164316441645164616471648164916501651165216531654165516561657165816591660166116621663166416651666166716681669167016711672167316741675167616771678167916801681168216831684168516861687168816891690169116921693169416951696169716981699170017011702170317041705170617071708170917101711171217131714171517161717171817191720172117221723172417251726172717281729173017311732173317341735173617371738173917401741174217431744174517461747174817491750175117521753175417551756175717581759176017611762176317641765176617671768176917701771177217731774177517761777177817791780178117821783178417851786178717881789179017911792179317941795179617971798179918001801180218031804180518061807180818091810181118121813181418151816181718181819182018211822182318241825182618271828182918301831183218331834183518361837183818391840184118421843184418451846184718481849185018511852185318541855185618571858185918601861186218631864186518661867186818691870187118721873187418751876187718781879188018811882188318841885188618871888188918901891189218931894189518961897189818991900190119021903190419051906190719081909191019111912191319141915191619171918191919201921192219231924192519261927192819291930193119321933193419351936193719381939194019411942194319441945/* SPDX-License-Identifier: GPL-2.0-only *//* Copyright (c) 2013-2022, Intel Corporation. */
#ifndef _VIRTCHNL_H_#define _VIRTCHNL_H_
#include <linux/bitops.h>#include <linux/bits.h>#include <linux/overflow.h>#include <uapi/linux/if_ether.h>
/* Description: * This header file describes the Virtual Function (VF) - Physical Function * (PF) communication protocol used by the drivers for all devices starting * from our 40G product line * * Admin queue buffer usage: * desc->opcode is always aqc_opc_send_msg_to_pf * flags, retval, datalen, and data addr are all used normally. * The Firmware copies the cookie fields when sending messages between the * PF and VF, but uses all other fields internally. Due to this limitation, * we must send all messages as "indirect", i.e. using an external buffer. * * All the VSI indexes are relative to the VF. Each VF can have maximum of * three VSIs. All the queue indexes are relative to the VSI. Each VF can * have a maximum of sixteen queues for all of its VSIs. * * The PF is required to return a status code in v_retval for all messages * except RESET_VF, which does not require any response. The returned value * is of virtchnl_status_code type, defined here. * * In general, VF driver initialization should roughly follow the order of * these opcodes. The VF driver must first validate the API version of the * PF driver, then request a reset, then get resources, then configure * queues and interrupts. After these operations are complete, the VF * driver may start its queues, optionally add MAC and VLAN filters, and * process traffic. */
/* START GENERIC DEFINES * Need to ensure the following enums and defines hold the same meaning and * value in current and future projects */
/* Error Codes */enum virtchnl_status_code { VIRTCHNL_STATUS_SUCCESS = 0, VIRTCHNL_STATUS_ERR_PARAM = -5, VIRTCHNL_STATUS_ERR_NO_MEMORY = -18, VIRTCHNL_STATUS_ERR_OPCODE_MISMATCH = -38, VIRTCHNL_STATUS_ERR_CQP_COMPL_ERROR = -39, VIRTCHNL_STATUS_ERR_INVALID_VF_ID = -40, VIRTCHNL_STATUS_ERR_ADMIN_QUEUE_ERROR = -53, VIRTCHNL_STATUS_ERR_NOT_SUPPORTED = -64,};
/* Backward compatibility */#define VIRTCHNL_ERR_PARAM VIRTCHNL_STATUS_ERR_PARAM#define VIRTCHNL_STATUS_NOT_SUPPORTED VIRTCHNL_STATUS_ERR_NOT_SUPPORTED
#define VIRTCHNL_LINK_SPEED_2_5GB_SHIFT 0x0#define VIRTCHNL_LINK_SPEED_100MB_SHIFT 0x1#define VIRTCHNL_LINK_SPEED_1000MB_SHIFT 0x2#define VIRTCHNL_LINK_SPEED_10GB_SHIFT 0x3#define VIRTCHNL_LINK_SPEED_40GB_SHIFT 0x4#define VIRTCHNL_LINK_SPEED_20GB_SHIFT 0x5#define VIRTCHNL_LINK_SPEED_25GB_SHIFT 0x6#define VIRTCHNL_LINK_SPEED_5GB_SHIFT 0x7
enum virtchnl_link_speed { VIRTCHNL_LINK_SPEED_UNKNOWN = 0, VIRTCHNL_LINK_SPEED_100MB = BIT(VIRTCHNL_LINK_SPEED_100MB_SHIFT), VIRTCHNL_LINK_SPEED_1GB = BIT(VIRTCHNL_LINK_SPEED_1000MB_SHIFT), VIRTCHNL_LINK_SPEED_10GB = BIT(VIRTCHNL_LINK_SPEED_10GB_SHIFT), VIRTCHNL_LINK_SPEED_40GB = BIT(VIRTCHNL_LINK_SPEED_40GB_SHIFT), VIRTCHNL_LINK_SPEED_20GB = BIT(VIRTCHNL_LINK_SPEED_20GB_SHIFT), VIRTCHNL_LINK_SPEED_25GB = BIT(VIRTCHNL_LINK_SPEED_25GB_SHIFT), VIRTCHNL_LINK_SPEED_2_5GB = BIT(VIRTCHNL_LINK_SPEED_2_5GB_SHIFT), VIRTCHNL_LINK_SPEED_5GB = BIT(VIRTCHNL_LINK_SPEED_5GB_SHIFT),};
/* for hsplit_0 field of Rx HMC context *//* deprecated with AVF 1.0 */enum virtchnl_rx_hsplit { VIRTCHNL_RX_HSPLIT_NO_SPLIT = 0, VIRTCHNL_RX_HSPLIT_SPLIT_L2 = 1, VIRTCHNL_RX_HSPLIT_SPLIT_IP = 2, VIRTCHNL_RX_HSPLIT_SPLIT_TCP_UDP = 4, VIRTCHNL_RX_HSPLIT_SPLIT_SCTP = 8,};
enum virtchnl_bw_limit_type { VIRTCHNL_BW_SHAPER = 0,};/* END GENERIC DEFINES */
/* Opcodes for VF-PF communication. These are placed in the v_opcode field * of the virtchnl_msg structure. */enum virtchnl_ops {/* The PF sends status change events to VFs using * the VIRTCHNL_OP_EVENT opcode. * VFs send requests to the PF using the other ops. * Use of "advanced opcode" features must be negotiated as part of capabilities * exchange and are not considered part of base mode feature set. */ VIRTCHNL_OP_UNKNOWN = 0, VIRTCHNL_OP_VERSION = 1, /* must ALWAYS be 1 */ VIRTCHNL_OP_RESET_VF = 2, VIRTCHNL_OP_GET_VF_RESOURCES = 3, VIRTCHNL_OP_CONFIG_TX_QUEUE = 4, VIRTCHNL_OP_CONFIG_RX_QUEUE = 5, VIRTCHNL_OP_CONFIG_VSI_QUEUES = 6, VIRTCHNL_OP_CONFIG_IRQ_MAP = 7, VIRTCHNL_OP_ENABLE_QUEUES = 8, VIRTCHNL_OP_DISABLE_QUEUES = 9, VIRTCHNL_OP_ADD_ETH_ADDR = 10, VIRTCHNL_OP_DEL_ETH_ADDR = 11, VIRTCHNL_OP_ADD_VLAN = 12, VIRTCHNL_OP_DEL_VLAN = 13, VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE = 14, VIRTCHNL_OP_GET_STATS = 15, VIRTCHNL_OP_RSVD = 16, VIRTCHNL_OP_EVENT = 17, /* must ALWAYS be 17 */ VIRTCHNL_OP_CONFIG_RSS_HFUNC = 18, /* opcode 19 is reserved */ VIRTCHNL_OP_IWARP = 20, /* advanced opcode */ VIRTCHNL_OP_RDMA = VIRTCHNL_OP_IWARP, VIRTCHNL_OP_CONFIG_IWARP_IRQ_MAP = 21, /* advanced opcode */ VIRTCHNL_OP_CONFIG_RDMA_IRQ_MAP = VIRTCHNL_OP_CONFIG_IWARP_IRQ_MAP, VIRTCHNL_OP_RELEASE_IWARP_IRQ_MAP = 22, /* advanced opcode */ VIRTCHNL_OP_RELEASE_RDMA_IRQ_MAP = VIRTCHNL_OP_RELEASE_IWARP_IRQ_MAP, VIRTCHNL_OP_CONFIG_RSS_KEY = 23, VIRTCHNL_OP_CONFIG_RSS_LUT = 24, VIRTCHNL_OP_GET_RSS_HASHCFG_CAPS = 25, VIRTCHNL_OP_SET_RSS_HASHCFG = 26, VIRTCHNL_OP_ENABLE_VLAN_STRIPPING = 27, VIRTCHNL_OP_DISABLE_VLAN_STRIPPING = 28, VIRTCHNL_OP_REQUEST_QUEUES = 29, VIRTCHNL_OP_ENABLE_CHANNELS = 30, VIRTCHNL_OP_DISABLE_CHANNELS = 31, VIRTCHNL_OP_ADD_CLOUD_FILTER = 32, VIRTCHNL_OP_DEL_CLOUD_FILTER = 33, /* opcode 34 - 43 are reserved */ VIRTCHNL_OP_GET_SUPPORTED_RXDIDS = 44, VIRTCHNL_OP_ADD_RSS_CFG = 45, VIRTCHNL_OP_DEL_RSS_CFG = 46, VIRTCHNL_OP_ADD_FDIR_FILTER = 47, VIRTCHNL_OP_DEL_FDIR_FILTER = 48, VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS = 51, VIRTCHNL_OP_ADD_VLAN_V2 = 52, VIRTCHNL_OP_DEL_VLAN_V2 = 53, VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 = 54, VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2 = 55, VIRTCHNL_OP_ENABLE_VLAN_INSERTION_V2 = 56, VIRTCHNL_OP_DISABLE_VLAN_INSERTION_V2 = 57, /* opcode 58 and 59 are reserved */ VIRTCHNL_OP_1588_PTP_GET_CAPS = 60, VIRTCHNL_OP_1588_PTP_GET_TIME = 61, /* opcode 62 - 65 are reserved */ VIRTCHNL_OP_GET_QOS_CAPS = 66, /* opcode 68 through 111 are reserved */ VIRTCHNL_OP_CONFIG_QUEUE_BW = 112, VIRTCHNL_OP_CONFIG_QUANTA = 113, VIRTCHNL_OP_MAX,};
/* These macros are used to generate compilation errors if a structure/union * is not exactly the correct length. It gives a divide by zero error if the * structure/union is not of the correct size, otherwise it creates an enum * that is never used. */#define VIRTCHNL_CHECK_STRUCT_LEN(n, X) enum virtchnl_static_assert_enum_##X \ { virtchnl_static_assert_##X = (n)/((sizeof(struct X) == (n)) ? 1 : 0) }#define VIRTCHNL_CHECK_UNION_LEN(n, X) enum virtchnl_static_asset_enum_##X \ { virtchnl_static_assert_##X = (n)/((sizeof(union X) == (n)) ? 1 : 0) }
/* Message descriptions and data structures. */
/* VIRTCHNL_OP_VERSION * VF posts its version number to the PF. PF responds with its version number * in the same format, along with a return code. * Reply from PF has its major/minor versions also in param0 and param1. * If there is a major version mismatch, then the VF cannot operate. * If there is a minor version mismatch, then the VF can operate but should * add a warning to the system log. * * This enum element MUST always be specified as == 1, regardless of other * changes in the API. The PF must always respond to this message without * error regardless of version mismatch. */#define VIRTCHNL_VERSION_MAJOR 1#define VIRTCHNL_VERSION_MINOR 1#define VIRTCHNL_VERSION_MINOR_NO_VF_CAPS 0
struct virtchnl_version_info { u32 major; u32 minor;};
VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_version_info);
#define VF_IS_V10(_v) (((_v)->major == 1) && ((_v)->minor == 0))#define VF_IS_V11(_ver) (((_ver)->major == 1) && ((_ver)->minor == 1))
/* VIRTCHNL_OP_RESET_VF * VF sends this request to PF with no parameters * PF does NOT respond! VF driver must delay then poll VFGEN_RSTAT register * until reset completion is indicated. The admin queue must be reinitialized * after this operation. * * When reset is complete, PF must ensure that all queues in all VSIs associated * with the VF are stopped, all queue configurations in the HMC are set to 0, * and all MAC and VLAN filters (except the default MAC address) on all VSIs * are cleared. */
/* VSI types that use VIRTCHNL interface for VF-PF communication. VSI_SRIOV * vsi_type should always be 6 for backward compatibility. Add other fields * as needed. */enum virtchnl_vsi_type { VIRTCHNL_VSI_TYPE_INVALID = 0, VIRTCHNL_VSI_SRIOV = 6,};
/* VIRTCHNL_OP_GET_VF_RESOURCES * Version 1.0 VF sends this request to PF with no parameters * Version 1.1 VF sends this request to PF with u32 bitmap of its capabilities * PF responds with an indirect message containing * virtchnl_vf_resource and one or more * virtchnl_vsi_resource structures. */
struct virtchnl_vsi_resource { u16 vsi_id; u16 num_queue_pairs;
/* see enum virtchnl_vsi_type */ s32 vsi_type; u16 qset_handle; u8 default_mac_addr[ETH_ALEN];};
VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_vsi_resource);
/* VF capability flags * VIRTCHNL_VF_OFFLOAD_L2 flag is inclusive of base mode L2 offloads including * TX/RX Checksum offloading and TSO for non-tunnelled packets. */#define VIRTCHNL_VF_OFFLOAD_L2 BIT(0)#define VIRTCHNL_VF_OFFLOAD_RDMA BIT(1)#define VIRTCHNL_VF_CAP_RDMA VIRTCHNL_VF_OFFLOAD_RDMA#define VIRTCHNL_VF_OFFLOAD_RSS_AQ BIT(3)#define VIRTCHNL_VF_OFFLOAD_RSS_REG BIT(4)#define VIRTCHNL_VF_OFFLOAD_WB_ON_ITR BIT(5)#define VIRTCHNL_VF_OFFLOAD_REQ_QUEUES BIT(6)/* used to negotiate communicating link speeds in Mbps */#define VIRTCHNL_VF_CAP_ADV_LINK_SPEED BIT(7)#define VIRTCHNL_VF_OFFLOAD_CRC BIT(10)#define VIRTCHNL_VF_OFFLOAD_TC_U32 BIT(11)#define VIRTCHNL_VF_OFFLOAD_VLAN_V2 BIT(15)#define VIRTCHNL_VF_OFFLOAD_VLAN BIT(16)#define VIRTCHNL_VF_OFFLOAD_RX_POLLING BIT(17)#define VIRTCHNL_VF_OFFLOAD_RSS_PCTYPE_V2 BIT(18)#define VIRTCHNL_VF_OFFLOAD_RSS_PF BIT(19)#define VIRTCHNL_VF_OFFLOAD_ENCAP BIT(20)#define VIRTCHNL_VF_OFFLOAD_ENCAP_CSUM BIT(21)#define VIRTCHNL_VF_OFFLOAD_RX_ENCAP_CSUM BIT(22)#define VIRTCHNL_VF_OFFLOAD_ADQ BIT(23)#define VIRTCHNL_VF_OFFLOAD_USO BIT(25)#define VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC BIT(26)#define VIRTCHNL_VF_OFFLOAD_ADV_RSS_PF BIT(27)#define VIRTCHNL_VF_OFFLOAD_FDIR_PF BIT(28)#define VIRTCHNL_VF_OFFLOAD_QOS BIT(29)#define VIRTCHNL_VF_CAP_PTP BIT(31)
#define VF_BASE_MODE_OFFLOADS (VIRTCHNL_VF_OFFLOAD_L2 | \ VIRTCHNL_VF_OFFLOAD_VLAN | \ VIRTCHNL_VF_OFFLOAD_RSS_PF)
struct virtchnl_vf_resource { u16 num_vsis; u16 num_queue_pairs; u16 max_vectors; u16 max_mtu;
u32 vf_cap_flags; u32 rss_key_size; u32 rss_lut_size;
struct virtchnl_vsi_resource vsi_res[];};
VIRTCHNL_CHECK_STRUCT_LEN(20, virtchnl_vf_resource);#define virtchnl_vf_resource_LEGACY_SIZEOF 36
/* VIRTCHNL_OP_CONFIG_TX_QUEUE * VF sends this message to set up parameters for one TX queue. * External data buffer contains one instance of virtchnl_txq_info. * PF configures requested queue and returns a status code. */
/* Tx queue config info */struct virtchnl_txq_info { u16 vsi_id; u16 queue_id; u16 ring_len; /* number of descriptors, multiple of 8 */ u16 headwb_enabled; /* deprecated with AVF 1.0 */ u64 dma_ring_addr; u64 dma_headwb_addr; /* deprecated with AVF 1.0 */};
VIRTCHNL_CHECK_STRUCT_LEN(24, virtchnl_txq_info);
/* RX descriptor IDs (range from 0 to 63) */enum virtchnl_rx_desc_ids { VIRTCHNL_RXDID_0_16B_BASE = 0, VIRTCHNL_RXDID_1_32B_BASE = 1, VIRTCHNL_RXDID_2_FLEX_SQ_NIC = 2, VIRTCHNL_RXDID_3_FLEX_SQ_SW = 3, VIRTCHNL_RXDID_4_FLEX_SQ_NIC_VEB = 4, VIRTCHNL_RXDID_5_FLEX_SQ_NIC_ACL = 5, VIRTCHNL_RXDID_6_FLEX_SQ_NIC_2 = 6, VIRTCHNL_RXDID_7_HW_RSVD = 7, /* 8 through 15 are reserved */ VIRTCHNL_RXDID_16_COMMS_GENERIC = 16, VIRTCHNL_RXDID_17_COMMS_AUX_VLAN = 17, VIRTCHNL_RXDID_18_COMMS_AUX_IPV4 = 18, VIRTCHNL_RXDID_19_COMMS_AUX_IPV6 = 19, VIRTCHNL_RXDID_20_COMMS_AUX_FLOW = 20, VIRTCHNL_RXDID_21_COMMS_AUX_TCP = 21, /* 22 through 63 are reserved */};
#define VIRTCHNL_RXDID_BIT(x) BIT_ULL(VIRTCHNL_RXDID_##x)
/* RX descriptor ID bitmasks */enum virtchnl_rx_desc_id_bitmasks { VIRTCHNL_RXDID_0_16B_BASE_M = VIRTCHNL_RXDID_BIT(0_16B_BASE), VIRTCHNL_RXDID_1_32B_BASE_M = VIRTCHNL_RXDID_BIT(1_32B_BASE), VIRTCHNL_RXDID_2_FLEX_SQ_NIC_M = VIRTCHNL_RXDID_BIT(2_FLEX_SQ_NIC), VIRTCHNL_RXDID_3_FLEX_SQ_SW_M = VIRTCHNL_RXDID_BIT(3_FLEX_SQ_SW), VIRTCHNL_RXDID_4_FLEX_SQ_NIC_VEB_M = VIRTCHNL_RXDID_BIT(4_FLEX_SQ_NIC_VEB), VIRTCHNL_RXDID_5_FLEX_SQ_NIC_ACL_M = VIRTCHNL_RXDID_BIT(5_FLEX_SQ_NIC_ACL), VIRTCHNL_RXDID_6_FLEX_SQ_NIC_2_M = VIRTCHNL_RXDID_BIT(6_FLEX_SQ_NIC_2), VIRTCHNL_RXDID_7_HW_RSVD_M = VIRTCHNL_RXDID_BIT(7_HW_RSVD), /* 8 through 15 are reserved */ VIRTCHNL_RXDID_16_COMMS_GENERIC_M = VIRTCHNL_RXDID_BIT(16_COMMS_GENERIC), VIRTCHNL_RXDID_17_COMMS_AUX_VLAN_M = VIRTCHNL_RXDID_BIT(17_COMMS_AUX_VLAN), VIRTCHNL_RXDID_18_COMMS_AUX_IPV4_M = VIRTCHNL_RXDID_BIT(18_COMMS_AUX_IPV4), VIRTCHNL_RXDID_19_COMMS_AUX_IPV6_M = VIRTCHNL_RXDID_BIT(19_COMMS_AUX_IPV6), VIRTCHNL_RXDID_20_COMMS_AUX_FLOW_M = VIRTCHNL_RXDID_BIT(20_COMMS_AUX_FLOW), VIRTCHNL_RXDID_21_COMMS_AUX_TCP_M = VIRTCHNL_RXDID_BIT(21_COMMS_AUX_TCP), /* 22 through 63 are reserved */};
/* virtchnl_rxq_info_flags - definition of bits in the flags field of the * virtchnl_rxq_info structure. * * @VIRTCHNL_PTP_RX_TSTAMP: request to enable Rx timestamping * * Other flag bits are currently reserved and they may be extended in the * future. */enum virtchnl_rxq_info_flags { VIRTCHNL_PTP_RX_TSTAMP = BIT(0),};
/* VIRTCHNL_OP_CONFIG_RX_QUEUE * VF sends this message to set up parameters for one RX queue. * External data buffer contains one instance of virtchnl_rxq_info. * PF configures requested queue and returns a status code. The * crc_disable flag disables CRC stripping on the VF. Setting * the crc_disable flag to 1 will disable CRC stripping for each * queue in the VF where the flag is set. The VIRTCHNL_VF_OFFLOAD_CRC * offload must have been set prior to sending this info or the PF * will ignore the request. This flag should be set the same for * all of the queues for a VF. */
/* Rx queue config info */struct virtchnl_rxq_info { u16 vsi_id; u16 queue_id; u32 ring_len; /* number of descriptors, multiple of 32 */ u16 hdr_size; u16 splithdr_enabled; /* deprecated with AVF 1.0 */ u32 databuffer_size; u32 max_pkt_size; u8 crc_disable; /* see enum virtchnl_rx_desc_ids; * only used when VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC is supported. Note * that when the offload is not supported, the descriptor format aligns * with VIRTCHNL_RXDID_1_32B_BASE. */ enum virtchnl_rx_desc_ids rxdid:8; enum virtchnl_rxq_info_flags flags:8; /* see virtchnl_rxq_info_flags */ u8 pad1; u64 dma_ring_addr;
/* see enum virtchnl_rx_hsplit; deprecated with AVF 1.0 */ s32 rx_split_pos; u32 pad2;};
VIRTCHNL_CHECK_STRUCT_LEN(40, virtchnl_rxq_info);
/* VIRTCHNL_OP_CONFIG_VSI_QUEUES * VF sends this message to set parameters for all active TX and RX queues * associated with the specified VSI. * PF configures queues and returns status. * If the number of queues specified is greater than the number of queues * associated with the VSI, an error is returned and no queues are configured. * NOTE: The VF is not required to configure all queues in a single request. * It may send multiple messages. PF drivers must correctly handle all VF * requests. */struct virtchnl_queue_pair_info { /* NOTE: vsi_id and queue_id should be identical for both queues. */ struct virtchnl_txq_info txq; struct virtchnl_rxq_info rxq;};
VIRTCHNL_CHECK_STRUCT_LEN(64, virtchnl_queue_pair_info);
struct virtchnl_vsi_queue_config_info { u16 vsi_id; u16 num_queue_pairs; u32 pad; struct virtchnl_queue_pair_info qpair[];};
VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_vsi_queue_config_info);#define virtchnl_vsi_queue_config_info_LEGACY_SIZEOF 72
/* VIRTCHNL_OP_REQUEST_QUEUES * VF sends this message to request the PF to allocate additional queues to * this VF. Each VF gets a guaranteed number of queues on init but asking for * additional queues must be negotiated. This is a best effort request as it * is possible the PF does not have enough queues left to support the request. * If the PF cannot support the number requested it will respond with the * maximum number it is able to support. If the request is successful, PF will * then reset the VF to institute required changes. */
/* VF resource request */struct virtchnl_vf_res_request { u16 num_queue_pairs;};
/* VIRTCHNL_OP_CONFIG_IRQ_MAP * VF uses this message to map vectors to queues. * The rxq_map and txq_map fields are bitmaps used to indicate which queues * are to be associated with the specified vector. * The "other" causes are always mapped to vector 0. The VF may not request * that vector 0 be used for traffic. * PF configures interrupt mapping and returns status. * NOTE: due to hardware requirements, all active queues (both TX and RX) * should be mapped to interrupts, even if the driver intends to operate * only in polling mode. In this case the interrupt may be disabled, but * the ITR timer will still run to trigger writebacks. */struct virtchnl_vector_map { u16 vsi_id; u16 vector_id; u16 rxq_map; u16 txq_map; u16 rxitr_idx; u16 txitr_idx;};
VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_vector_map);
struct virtchnl_irq_map_info { u16 num_vectors; struct virtchnl_vector_map vecmap[];};
VIRTCHNL_CHECK_STRUCT_LEN(2, virtchnl_irq_map_info);#define virtchnl_irq_map_info_LEGACY_SIZEOF 14
/* VIRTCHNL_OP_ENABLE_QUEUES * VIRTCHNL_OP_DISABLE_QUEUES * VF sends these message to enable or disable TX/RX queue pairs. * The queues fields are bitmaps indicating which queues to act upon. * (Currently, we only support 16 queues per VF, but we make the field * u32 to allow for expansion.) * PF performs requested action and returns status. * NOTE: The VF is not required to enable/disable all queues in a single * request. It may send multiple messages. * PF drivers must correctly handle all VF requests. */struct virtchnl_queue_select { u16 vsi_id; u16 pad; u32 rx_queues; u32 tx_queues;};
VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_queue_select);
/* VIRTCHNL_OP_ADD_ETH_ADDR * VF sends this message in order to add one or more unicast or multicast * address filters for the specified VSI. * PF adds the filters and returns status. */
/* VIRTCHNL_OP_DEL_ETH_ADDR * VF sends this message in order to remove one or more unicast or multicast * filters for the specified VSI. * PF removes the filters and returns status. */
/* VIRTCHNL_ETHER_ADDR_LEGACY * Prior to adding the @type member to virtchnl_ether_addr, there were 2 pad * bytes. Moving forward all VF drivers should not set type to * VIRTCHNL_ETHER_ADDR_LEGACY. This is only here to not break previous/legacy * behavior. The control plane function (i.e. PF) can use a best effort method * of tracking the primary/device unicast in this case, but there is no * guarantee and functionality depends on the implementation of the PF. */
/* VIRTCHNL_ETHER_ADDR_PRIMARY * All VF drivers should set @type to VIRTCHNL_ETHER_ADDR_PRIMARY for the * primary/device unicast MAC address filter for VIRTCHNL_OP_ADD_ETH_ADDR and * VIRTCHNL_OP_DEL_ETH_ADDR. This allows for the underlying control plane * function (i.e. PF) to accurately track and use this MAC address for * displaying on the host and for VM/function reset. */
/* VIRTCHNL_ETHER_ADDR_EXTRA * All VF drivers should set @type to VIRTCHNL_ETHER_ADDR_EXTRA for any extra * unicast and/or multicast filters that are being added/deleted via * VIRTCHNL_OP_DEL_ETH_ADDR/VIRTCHNL_OP_ADD_ETH_ADDR respectively. */struct virtchnl_ether_addr { u8 addr[ETH_ALEN]; u8 type;#define VIRTCHNL_ETHER_ADDR_LEGACY 0#define VIRTCHNL_ETHER_ADDR_PRIMARY 1#define VIRTCHNL_ETHER_ADDR_EXTRA 2#define VIRTCHNL_ETHER_ADDR_TYPE_MASK 3 /* first two bits of type are valid */ u8 pad;};
VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_ether_addr);
struct virtchnl_ether_addr_list { u16 vsi_id; u16 num_elements; struct virtchnl_ether_addr list[];};
VIRTCHNL_CHECK_STRUCT_LEN(4, virtchnl_ether_addr_list);#define virtchnl_ether_addr_list_LEGACY_SIZEOF 12
/* VIRTCHNL_OP_ADD_VLAN * VF sends this message to add one or more VLAN tag filters for receives. * PF adds the filters and returns status. * If a port VLAN is configured by the PF, this operation will return an * error to the VF. */
/* VIRTCHNL_OP_DEL_VLAN * VF sends this message to remove one or more VLAN tag filters for receives. * PF removes the filters and returns status. * If a port VLAN is configured by the PF, this operation will return an * error to the VF. */
struct virtchnl_vlan_filter_list { u16 vsi_id; u16 num_elements; u16 vlan_id[];};
VIRTCHNL_CHECK_STRUCT_LEN(4, virtchnl_vlan_filter_list);#define virtchnl_vlan_filter_list_LEGACY_SIZEOF 6
/* This enum is used for all of the VIRTCHNL_VF_OFFLOAD_VLAN_V2_CAPS related * structures and opcodes. * * VIRTCHNL_VLAN_UNSUPPORTED - This field is not supported and if a VF driver * populates it the PF should return VIRTCHNL_STATUS_ERR_NOT_SUPPORTED. * * VIRTCHNL_VLAN_ETHERTYPE_8100 - This field supports 0x8100 ethertype. * VIRTCHNL_VLAN_ETHERTYPE_88A8 - This field supports 0x88A8 ethertype. * VIRTCHNL_VLAN_ETHERTYPE_9100 - This field supports 0x9100 ethertype. * * VIRTCHNL_VLAN_ETHERTYPE_AND - Used when multiple ethertypes can be supported * by the PF concurrently. For example, if the PF can support * VIRTCHNL_VLAN_ETHERTYPE_8100 AND VIRTCHNL_VLAN_ETHERTYPE_88A8 filters it * would OR the following bits: * * VIRTHCNL_VLAN_ETHERTYPE_8100 | * VIRTCHNL_VLAN_ETHERTYPE_88A8 | * VIRTCHNL_VLAN_ETHERTYPE_AND; * * The VF would interpret this as VLAN filtering can be supported on both 0x8100 * and 0x88A8 VLAN ethertypes. * * VIRTCHNL_ETHERTYPE_XOR - Used when only a single ethertype can be supported * by the PF concurrently. For example if the PF can support * VIRTCHNL_VLAN_ETHERTYPE_8100 XOR VIRTCHNL_VLAN_ETHERTYPE_88A8 stripping * offload it would OR the following bits: * * VIRTCHNL_VLAN_ETHERTYPE_8100 | * VIRTCHNL_VLAN_ETHERTYPE_88A8 | * VIRTCHNL_VLAN_ETHERTYPE_XOR; * * The VF would interpret this as VLAN stripping can be supported on either * 0x8100 or 0x88a8 VLAN ethertypes. So when requesting VLAN stripping via * VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 the specified ethertype will override * the previously set value. * * VIRTCHNL_VLAN_TAG_LOCATION_L2TAG1 - Used to tell the VF to insert and/or * strip the VLAN tag using the L2TAG1 field of the Tx/Rx descriptors. * * VIRTCHNL_VLAN_TAG_LOCATION_L2TAG2 - Used to tell the VF to insert hardware * offloaded VLAN tags using the L2TAG2 field of the Tx descriptor. * * VIRTCHNL_VLAN_TAG_LOCATION_L2TAG2 - Used to tell the VF to strip hardware * offloaded VLAN tags using the L2TAG2_2 field of the Rx descriptor. * * VIRTCHNL_VLAN_PRIO - This field supports VLAN priority bits. This is used for * VLAN filtering if the underlying PF supports it. * * VIRTCHNL_VLAN_TOGGLE_ALLOWED - This field is used to say whether a * certain VLAN capability can be toggled. For example if the underlying PF/CP * allows the VF to toggle VLAN filtering, stripping, and/or insertion it should * set this bit along with the supported ethertypes. */enum virtchnl_vlan_support { VIRTCHNL_VLAN_UNSUPPORTED = 0, VIRTCHNL_VLAN_ETHERTYPE_8100 = BIT(0), VIRTCHNL_VLAN_ETHERTYPE_88A8 = BIT(1), VIRTCHNL_VLAN_ETHERTYPE_9100 = BIT(2), VIRTCHNL_VLAN_TAG_LOCATION_L2TAG1 = BIT(8), VIRTCHNL_VLAN_TAG_LOCATION_L2TAG2 = BIT(9), VIRTCHNL_VLAN_TAG_LOCATION_L2TAG2_2 = BIT(10), VIRTCHNL_VLAN_PRIO = BIT(24), VIRTCHNL_VLAN_FILTER_MASK = BIT(28), VIRTCHNL_VLAN_ETHERTYPE_AND = BIT(29), VIRTCHNL_VLAN_ETHERTYPE_XOR = BIT(30), VIRTCHNL_VLAN_TOGGLE = BIT(31),};
/* This structure is used as part of the VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS * for filtering, insertion, and stripping capabilities. * * If only outer capabilities are supported (for filtering, insertion, and/or * stripping) then this refers to the outer most or single VLAN from the VF's * perspective. * * If only inner capabilities are supported (for filtering, insertion, and/or * stripping) then this refers to the outer most or single VLAN from the VF's * perspective. Functionally this is the same as if only outer capabilities are * supported. The VF driver is just forced to use the inner fields when * adding/deleting filters and enabling/disabling offloads (if supported). * * If both outer and inner capabilities are supported (for filtering, insertion, * and/or stripping) then outer refers to the outer most or single VLAN and * inner refers to the second VLAN, if it exists, in the packet. * * There is no support for tunneled VLAN offloads, so outer or inner are never * referring to a tunneled packet from the VF's perspective. */struct virtchnl_vlan_supported_caps { u32 outer; u32 inner;};
/* The PF populates these fields based on the supported VLAN filtering. If a * field is VIRTCHNL_VLAN_UNSUPPORTED then it's not supported and the PF will * reject any VIRTCHNL_OP_ADD_VLAN_V2 or VIRTCHNL_OP_DEL_VLAN_V2 messages using * the unsupported fields. * * Also, a VF is only allowed to toggle its VLAN filtering setting if the * VIRTCHNL_VLAN_TOGGLE bit is set. * * The ethertype(s) specified in the ethertype_init field are the ethertypes * enabled for VLAN filtering. VLAN filtering in this case refers to the outer * most VLAN from the VF's perspective. If both inner and outer filtering are * allowed then ethertype_init only refers to the outer most VLAN as only * VLAN ethertype supported for inner VLAN filtering is * VIRTCHNL_VLAN_ETHERTYPE_8100. By default, inner VLAN filtering is disabled * when both inner and outer filtering are allowed. * * The max_filters field tells the VF how many VLAN filters it's allowed to have * at any one time. If it exceeds this amount and tries to add another filter, * then the request will be rejected by the PF. To prevent failures, the VF * should keep track of how many VLAN filters it has added and not attempt to * add more than max_filters. */struct virtchnl_vlan_filtering_caps { struct virtchnl_vlan_supported_caps filtering_support; u32 ethertype_init; u16 max_filters; u8 pad[2];};
VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_vlan_filtering_caps);
/* This enum is used for the virtchnl_vlan_offload_caps structure to specify * if the PF supports a different ethertype for stripping and insertion. * * VIRTCHNL_ETHERTYPE_STRIPPING_MATCHES_INSERTION - The ethertype(s) specified * for stripping affect the ethertype(s) specified for insertion and visa versa * as well. If the VF tries to configure VLAN stripping via * VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 with VIRTCHNL_VLAN_ETHERTYPE_8100 then * that will be the ethertype for both stripping and insertion. * * VIRTCHNL_ETHERTYPE_MATCH_NOT_REQUIRED - The ethertype(s) specified for * stripping do not affect the ethertype(s) specified for insertion and visa * versa. */enum virtchnl_vlan_ethertype_match { VIRTCHNL_ETHERTYPE_STRIPPING_MATCHES_INSERTION = 0, VIRTCHNL_ETHERTYPE_MATCH_NOT_REQUIRED = 1,};
/* The PF populates these fields based on the supported VLAN offloads. If a * field is VIRTCHNL_VLAN_UNSUPPORTED then it's not supported and the PF will * reject any VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 or * VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2 messages using the unsupported fields. * * Also, a VF is only allowed to toggle its VLAN offload setting if the * VIRTCHNL_VLAN_TOGGLE_ALLOWED bit is set. * * The VF driver needs to be aware of how the tags are stripped by hardware and * inserted by the VF driver based on the level of offload support. The PF will * populate these fields based on where the VLAN tags are expected to be * offloaded via the VIRTHCNL_VLAN_TAG_LOCATION_* bits. The VF will need to * interpret these fields. See the definition of the * VIRTCHNL_VLAN_TAG_LOCATION_* bits above the virtchnl_vlan_support * enumeration. */struct virtchnl_vlan_offload_caps { struct virtchnl_vlan_supported_caps stripping_support; struct virtchnl_vlan_supported_caps insertion_support; u32 ethertype_init; u8 ethertype_match; u8 pad[3];};
VIRTCHNL_CHECK_STRUCT_LEN(24, virtchnl_vlan_offload_caps);
/* VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS * VF sends this message to determine its VLAN capabilities. * * PF will mark which capabilities it supports based on hardware support and * current configuration. For example, if a port VLAN is configured the PF will * not allow outer VLAN filtering, stripping, or insertion to be configured so * it will block these features from the VF. * * The VF will need to cross reference its capabilities with the PFs * capabilities in the response message from the PF to determine the VLAN * support. */struct virtchnl_vlan_caps { struct virtchnl_vlan_filtering_caps filtering; struct virtchnl_vlan_offload_caps offloads;};
VIRTCHNL_CHECK_STRUCT_LEN(40, virtchnl_vlan_caps);
struct virtchnl_vlan { u16 tci; /* tci[15:13] = PCP and tci[11:0] = VID */ u16 tci_mask; /* only valid if VIRTCHNL_VLAN_FILTER_MASK set in * filtering caps */ u16 tpid; /* 0x8100, 0x88a8, etc. and only type(s) set in * filtering caps. Note that tpid here does not refer to * VIRTCHNL_VLAN_ETHERTYPE_*, but it refers to the * actual 2-byte VLAN TPID */ u8 pad[2];};
VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_vlan);
struct virtchnl_vlan_filter { struct virtchnl_vlan inner; struct virtchnl_vlan outer; u8 pad[16];};
VIRTCHNL_CHECK_STRUCT_LEN(32, virtchnl_vlan_filter);
/* VIRTCHNL_OP_ADD_VLAN_V2 * VIRTCHNL_OP_DEL_VLAN_V2 * * VF sends these messages to add/del one or more VLAN tag filters for Rx * traffic. * * The PF attempts to add the filters and returns status. * * The VF should only ever attempt to add/del virtchnl_vlan_filter(s) using the * supported fields negotiated via VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS. */struct virtchnl_vlan_filter_list_v2 { u16 vport_id; u16 num_elements; u8 pad[4]; struct virtchnl_vlan_filter filters[];};
VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_vlan_filter_list_v2);#define virtchnl_vlan_filter_list_v2_LEGACY_SIZEOF 40
/* VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 * VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2 * VIRTCHNL_OP_ENABLE_VLAN_INSERTION_V2 * VIRTCHNL_OP_DISABLE_VLAN_INSERTION_V2 * * VF sends this message to enable or disable VLAN stripping or insertion. It * also needs to specify an ethertype. The VF knows which VLAN ethertypes are * allowed and whether or not it's allowed to enable/disable the specific * offload via the VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS message. The VF needs to * parse the virtchnl_vlan_caps.offloads fields to determine which offload * messages are allowed. * * For example, if the PF populates the virtchnl_vlan_caps.offloads in the * following manner the VF will be allowed to enable and/or disable 0x8100 inner * VLAN insertion and/or stripping via the opcodes listed above. Inner in this * case means the outer most or single VLAN from the VF's perspective. This is * because no outer offloads are supported. See the comments above the * virtchnl_vlan_supported_caps structure for more details. * * virtchnl_vlan_caps.offloads.stripping_support.inner = * VIRTCHNL_VLAN_TOGGLE | * VIRTCHNL_VLAN_ETHERTYPE_8100; * * virtchnl_vlan_caps.offloads.insertion_support.inner = * VIRTCHNL_VLAN_TOGGLE | * VIRTCHNL_VLAN_ETHERTYPE_8100; * * In order to enable inner (again note that in this case inner is the outer * most or single VLAN from the VF's perspective) VLAN stripping for 0x8100 * VLANs, the VF would populate the virtchnl_vlan_setting structure in the * following manner and send the VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 message. * * virtchnl_vlan_setting.inner_ethertype_setting = * VIRTCHNL_VLAN_ETHERTYPE_8100; * * virtchnl_vlan_setting.vport_id = vport_id or vsi_id assigned to the VF on * initialization. * * The reason that VLAN TPID(s) are not being used for the * outer_ethertype_setting and inner_ethertype_setting fields is because it's * possible a device could support VLAN insertion and/or stripping offload on * multiple ethertypes concurrently, so this method allows a VF to request * multiple ethertypes in one message using the virtchnl_vlan_support * enumeration. * * For example, if the PF populates the virtchnl_vlan_caps.offloads in the * following manner the VF will be allowed to enable 0x8100 and 0x88a8 outer * VLAN insertion and stripping simultaneously. The * virtchnl_vlan_caps.offloads.ethertype_match field will also have to be * populated based on what the PF can support. * * virtchnl_vlan_caps.offloads.stripping_support.outer = * VIRTCHNL_VLAN_TOGGLE | * VIRTCHNL_VLAN_ETHERTYPE_8100 | * VIRTCHNL_VLAN_ETHERTYPE_88A8 | * VIRTCHNL_VLAN_ETHERTYPE_AND; * * virtchnl_vlan_caps.offloads.insertion_support.outer = * VIRTCHNL_VLAN_TOGGLE | * VIRTCHNL_VLAN_ETHERTYPE_8100 | * VIRTCHNL_VLAN_ETHERTYPE_88A8 | * VIRTCHNL_VLAN_ETHERTYPE_AND; * * In order to enable outer VLAN stripping for 0x8100 and 0x88a8 VLANs, the VF * would populate the virthcnl_vlan_offload_structure in the following manner * and send the VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 message. * * virtchnl_vlan_setting.outer_ethertype_setting = * VIRTHCNL_VLAN_ETHERTYPE_8100 | * VIRTHCNL_VLAN_ETHERTYPE_88A8; * * virtchnl_vlan_setting.vport_id = vport_id or vsi_id assigned to the VF on * initialization. * * There is also the case where a PF and the underlying hardware can support * VLAN offloads on multiple ethertypes, but not concurrently. For example, if * the PF populates the virtchnl_vlan_caps.offloads in the following manner the * VF will be allowed to enable and/or disable 0x8100 XOR 0x88a8 outer VLAN * offloads. The ethertypes must match for stripping and insertion. * * virtchnl_vlan_caps.offloads.stripping_support.outer = * VIRTCHNL_VLAN_TOGGLE | * VIRTCHNL_VLAN_ETHERTYPE_8100 | * VIRTCHNL_VLAN_ETHERTYPE_88A8 | * VIRTCHNL_VLAN_ETHERTYPE_XOR; * * virtchnl_vlan_caps.offloads.insertion_support.outer = * VIRTCHNL_VLAN_TOGGLE | * VIRTCHNL_VLAN_ETHERTYPE_8100 | * VIRTCHNL_VLAN_ETHERTYPE_88A8 | * VIRTCHNL_VLAN_ETHERTYPE_XOR; * * virtchnl_vlan_caps.offloads.ethertype_match = * VIRTCHNL_ETHERTYPE_STRIPPING_MATCHES_INSERTION; * * In order to enable outer VLAN stripping for 0x88a8 VLANs, the VF would * populate the virtchnl_vlan_setting structure in the following manner and send * the VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2. Also, this will change the * ethertype for VLAN insertion if it's enabled. So, for completeness, a * VIRTCHNL_OP_ENABLE_VLAN_INSERTION_V2 with the same ethertype should be sent. * * virtchnl_vlan_setting.outer_ethertype_setting = VIRTHCNL_VLAN_ETHERTYPE_88A8; * * virtchnl_vlan_setting.vport_id = vport_id or vsi_id assigned to the VF on * initialization. */struct virtchnl_vlan_setting { u32 outer_ethertype_setting; u32 inner_ethertype_setting; u16 vport_id; u8 pad[6];};
VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_vlan_setting);
/* VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE * VF sends VSI id and flags. * PF returns status code in retval. * Note: we assume that broadcast accept mode is always enabled. */struct virtchnl_promisc_info { u16 vsi_id; u16 flags;};
VIRTCHNL_CHECK_STRUCT_LEN(4, virtchnl_promisc_info);
#define FLAG_VF_UNICAST_PROMISC 0x00000001#define FLAG_VF_MULTICAST_PROMISC 0x00000002
/* VIRTCHNL_OP_GET_STATS * VF sends this message to request stats for the selected VSI. VF uses * the virtchnl_queue_select struct to specify the VSI. The queue_id * field is ignored by the PF. * * PF replies with struct eth_stats in an external buffer. */
/* VIRTCHNL_OP_CONFIG_RSS_KEY * VIRTCHNL_OP_CONFIG_RSS_LUT * VF sends these messages to configure RSS. Only supported if both PF * and VF drivers set the VIRTCHNL_VF_OFFLOAD_RSS_PF bit during * configuration negotiation. If this is the case, then the RSS fields in * the VF resource struct are valid. * Both the key and LUT are initialized to 0 by the PF, meaning that * RSS is effectively disabled until set up by the VF. */struct virtchnl_rss_key { u16 vsi_id; u16 key_len; u8 key[]; /* RSS hash key, packed bytes */};
VIRTCHNL_CHECK_STRUCT_LEN(4, virtchnl_rss_key);#define virtchnl_rss_key_LEGACY_SIZEOF 6
struct virtchnl_rss_lut { u16 vsi_id; u16 lut_entries; u8 lut[]; /* RSS lookup table */};
VIRTCHNL_CHECK_STRUCT_LEN(4, virtchnl_rss_lut);#define virtchnl_rss_lut_LEGACY_SIZEOF 6
/* VIRTCHNL_OP_GET_RSS_HASHCFG_CAPS * VIRTCHNL_OP_SET_RSS_HASHCFG * VF sends these messages to get and set the hash filter configuration for RSS. * By default, the PF sets these to all possible traffic types that the * hardware supports. The VF can query this value if it wants to change the * traffic types that are hashed by the hardware. */struct virtchnl_rss_hashcfg { /* Bits defined by enum libie_filter_pctype */ u64 hashcfg;};
VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_rss_hashcfg);
/* Type of RSS algorithm */enum virtchnl_rss_algorithm { VIRTCHNL_RSS_ALG_TOEPLITZ_ASYMMETRIC = 0, VIRTCHNL_RSS_ALG_R_ASYMMETRIC = 1, VIRTCHNL_RSS_ALG_TOEPLITZ_SYMMETRIC = 2, VIRTCHNL_RSS_ALG_XOR_SYMMETRIC = 3,};
/* VIRTCHNL_OP_CONFIG_RSS_HFUNC * VF sends this message to configure the RSS hash function. Only supported * if both PF and VF drivers set the VIRTCHNL_VF_OFFLOAD_RSS_PF bit during * configuration negotiation. * The hash function is initialized to VIRTCHNL_RSS_ALG_TOEPLITZ_ASYMMETRIC * by the PF. */struct virtchnl_rss_hfunc { u16 vsi_id; u16 rss_algorithm; /* enum virtchnl_rss_algorithm */ u32 reserved;};
VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_rss_hfunc);
/* VIRTCHNL_OP_ENABLE_CHANNELS * VIRTCHNL_OP_DISABLE_CHANNELS * VF sends these messages to enable or disable channels based on * the user specified queue count and queue offset for each traffic class. * This struct encompasses all the information that the PF needs from * VF to create a channel. */struct virtchnl_channel_info { u16 count; /* number of queues in a channel */ u16 offset; /* queues in a channel start from 'offset' */ u32 pad; u64 max_tx_rate;};
VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_channel_info);
struct virtchnl_tc_info { u32 num_tc; u32 pad; struct virtchnl_channel_info list[];};
VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_tc_info);#define virtchnl_tc_info_LEGACY_SIZEOF 24
/* VIRTCHNL_ADD_CLOUD_FILTER * VIRTCHNL_DEL_CLOUD_FILTER * VF sends these messages to add or delete a cloud filter based on the * user specified match and action filters. These structures encompass * all the information that the PF needs from the VF to add/delete a * cloud filter. */
struct virtchnl_l4_spec { u8 src_mac[ETH_ALEN]; u8 dst_mac[ETH_ALEN]; __be16 vlan_id; __be16 pad; /* reserved for future use */ __be32 src_ip[4]; __be32 dst_ip[4]; __be16 src_port; __be16 dst_port;};
VIRTCHNL_CHECK_STRUCT_LEN(52, virtchnl_l4_spec);
union virtchnl_flow_spec { struct virtchnl_l4_spec tcp_spec; u8 buffer[128]; /* reserved for future use */};
VIRTCHNL_CHECK_UNION_LEN(128, virtchnl_flow_spec);
enum virtchnl_action { /* action types */ VIRTCHNL_ACTION_DROP = 0, VIRTCHNL_ACTION_TC_REDIRECT, VIRTCHNL_ACTION_PASSTHRU, VIRTCHNL_ACTION_QUEUE, VIRTCHNL_ACTION_Q_REGION, VIRTCHNL_ACTION_MARK, VIRTCHNL_ACTION_COUNT,};
enum virtchnl_flow_type { /* flow types */ VIRTCHNL_TCP_V4_FLOW = 0, VIRTCHNL_TCP_V6_FLOW,};
struct virtchnl_filter { union virtchnl_flow_spec data; union virtchnl_flow_spec mask;
/* see enum virtchnl_flow_type */ s32 flow_type;
/* see enum virtchnl_action */ s32 action; u32 action_meta; u8 field_flags; u8 pad[3];};
VIRTCHNL_CHECK_STRUCT_LEN(272, virtchnl_filter);
/* VIRTCHNL_OP_EVENT * PF sends this message to inform the VF driver of events that may affect it. * No direct response is expected from the VF, though it may generate other * messages in response to this one. */enum virtchnl_event_codes { VIRTCHNL_EVENT_UNKNOWN = 0, VIRTCHNL_EVENT_LINK_CHANGE, VIRTCHNL_EVENT_RESET_IMPENDING, VIRTCHNL_EVENT_PF_DRIVER_CLOSE,};
#define PF_EVENT_SEVERITY_INFO 0#define PF_EVENT_SEVERITY_CERTAIN_DOOM 255
struct virtchnl_pf_event { /* see enum virtchnl_event_codes */ s32 event; union { /* If the PF driver does not support the new speed reporting * capabilities then use link_event else use link_event_adv to * get the speed and link information. The ability to understand * new speeds is indicated by setting the capability flag * VIRTCHNL_VF_CAP_ADV_LINK_SPEED in vf_cap_flags parameter * in virtchnl_vf_resource struct and can be used to determine * which link event struct to use below. */ struct { enum virtchnl_link_speed link_speed; bool link_status; u8 pad[3]; } link_event; struct { /* link_speed provided in Mbps */ u32 link_speed; u8 link_status; u8 pad[3]; } link_event_adv; } event_data;
s32 severity;};
VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_pf_event);
/* used to specify if a ceq_idx or aeq_idx is invalid */#define VIRTCHNL_RDMA_INVALID_QUEUE_IDX 0xFFFF/* VIRTCHNL_OP_CONFIG_RDMA_IRQ_MAP * VF uses this message to request PF to map RDMA vectors to RDMA queues. * The request for this originates from the VF RDMA driver through * a client interface between VF LAN and VF RDMA driver. * A vector could have an AEQ and CEQ attached to it although * there is a single AEQ per VF RDMA instance in which case * most vectors will have an VIRTCHNL_RDMA_INVALID_QUEUE_IDX for aeq and valid * idx for ceqs There will never be a case where there will be multiple CEQs * attached to a single vector. * PF configures interrupt mapping and returns status. */
struct virtchnl_rdma_qv_info { u32 v_idx; /* msix_vector */ u16 ceq_idx; /* set to VIRTCHNL_RDMA_INVALID_QUEUE_IDX if invalid */ u16 aeq_idx; /* set to VIRTCHNL_RDMA_INVALID_QUEUE_IDX if invalid */ u8 itr_idx; u8 pad[3];};
VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_rdma_qv_info);
struct virtchnl_rdma_qvlist_info { u32 num_vectors; struct virtchnl_rdma_qv_info qv_info[];};
VIRTCHNL_CHECK_STRUCT_LEN(4, virtchnl_rdma_qvlist_info);#define virtchnl_rdma_qvlist_info_LEGACY_SIZEOF 16
/* VF reset states - these are written into the RSTAT register: * VFGEN_RSTAT on the VF * When the PF initiates a reset, it writes 0 * When the reset is complete, it writes 1 * When the PF detects that the VF has recovered, it writes 2 * VF checks this register periodically to determine if a reset has occurred, * then polls it to know when the reset is complete. * If either the PF or VF reads the register while the hardware * is in a reset state, it will return DEADBEEF, which, when masked * will result in 3. */enum virtchnl_vfr_states { VIRTCHNL_VFR_INPROGRESS = 0, VIRTCHNL_VFR_COMPLETED, VIRTCHNL_VFR_VFACTIVE,};
#define VIRTCHNL_MAX_NUM_PROTO_HDRS 32#define VIRTCHNL_MAX_SIZE_RAW_PACKET 1024#define PROTO_HDR_SHIFT 5#define PROTO_HDR_FIELD_START(proto_hdr_type) ((proto_hdr_type) << PROTO_HDR_SHIFT)#define PROTO_HDR_FIELD_MASK ((1UL << PROTO_HDR_SHIFT) - 1)
/* VF use these macros to configure each protocol header. * Specify which protocol headers and protocol header fields base on * virtchnl_proto_hdr_type and virtchnl_proto_hdr_field. * @param hdr: a struct of virtchnl_proto_hdr * @param hdr_type: ETH/IPV4/TCP, etc * @param field: SRC/DST/TEID/SPI, etc */#define VIRTCHNL_ADD_PROTO_HDR_FIELD(hdr, field) \ ((hdr)->field_selector |= BIT((field) & PROTO_HDR_FIELD_MASK))#define VIRTCHNL_DEL_PROTO_HDR_FIELD(hdr, field) \ ((hdr)->field_selector &= ~BIT((field) & PROTO_HDR_FIELD_MASK))#define VIRTCHNL_TEST_PROTO_HDR_FIELD(hdr, val) \ ((hdr)->field_selector & BIT((val) & PROTO_HDR_FIELD_MASK))#define VIRTCHNL_GET_PROTO_HDR_FIELD(hdr) ((hdr)->field_selector)
#define VIRTCHNL_ADD_PROTO_HDR_FIELD_BIT(hdr, hdr_type, field) \ (VIRTCHNL_ADD_PROTO_HDR_FIELD(hdr, \ VIRTCHNL_PROTO_HDR_ ## hdr_type ## _ ## field))#define VIRTCHNL_DEL_PROTO_HDR_FIELD_BIT(hdr, hdr_type, field) \ (VIRTCHNL_DEL_PROTO_HDR_FIELD(hdr, \ VIRTCHNL_PROTO_HDR_ ## hdr_type ## _ ## field))
#define VIRTCHNL_SET_PROTO_HDR_TYPE(hdr, hdr_type) \ ((hdr)->type = VIRTCHNL_PROTO_HDR_ ## hdr_type)#define VIRTCHNL_GET_PROTO_HDR_TYPE(hdr) \ (((hdr)->type) >> PROTO_HDR_SHIFT)#define VIRTCHNL_TEST_PROTO_HDR_TYPE(hdr, val) \ ((hdr)->type == ((s32)((val) >> PROTO_HDR_SHIFT)))#define VIRTCHNL_TEST_PROTO_HDR(hdr, val) \ (VIRTCHNL_TEST_PROTO_HDR_TYPE((hdr), (val)) && \ VIRTCHNL_TEST_PROTO_HDR_FIELD((hdr), (val)))
/* Protocol header type within a packet segment. A segment consists of one or * more protocol headers that make up a logical group of protocol headers. Each * logical group of protocol headers encapsulates or is encapsulated using/by * tunneling or encapsulation protocols for network virtualization. */enum virtchnl_proto_hdr_type { VIRTCHNL_PROTO_HDR_NONE, VIRTCHNL_PROTO_HDR_ETH, VIRTCHNL_PROTO_HDR_S_VLAN, VIRTCHNL_PROTO_HDR_C_VLAN, VIRTCHNL_PROTO_HDR_IPV4, VIRTCHNL_PROTO_HDR_IPV6, VIRTCHNL_PROTO_HDR_TCP, VIRTCHNL_PROTO_HDR_UDP, VIRTCHNL_PROTO_HDR_SCTP, VIRTCHNL_PROTO_HDR_GTPU_IP, VIRTCHNL_PROTO_HDR_GTPU_EH, VIRTCHNL_PROTO_HDR_GTPU_EH_PDU_DWN, VIRTCHNL_PROTO_HDR_GTPU_EH_PDU_UP, VIRTCHNL_PROTO_HDR_PPPOE, VIRTCHNL_PROTO_HDR_L2TPV3, VIRTCHNL_PROTO_HDR_ESP, VIRTCHNL_PROTO_HDR_AH, VIRTCHNL_PROTO_HDR_PFCP, VIRTCHNL_PROTO_HDR_GTPC, VIRTCHNL_PROTO_HDR_ECPRI, VIRTCHNL_PROTO_HDR_L2TPV2, VIRTCHNL_PROTO_HDR_PPP, /* IPv4 and IPv6 Fragment header types are only associated to * VIRTCHNL_PROTO_HDR_IPV4 and VIRTCHNL_PROTO_HDR_IPV6 respectively, * cannot be used independently. */ VIRTCHNL_PROTO_HDR_IPV4_FRAG, VIRTCHNL_PROTO_HDR_IPV6_EH_FRAG, VIRTCHNL_PROTO_HDR_GRE,};
/* Protocol header field within a protocol header. */enum virtchnl_proto_hdr_field { /* ETHER */ VIRTCHNL_PROTO_HDR_ETH_SRC = PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_ETH), VIRTCHNL_PROTO_HDR_ETH_DST, VIRTCHNL_PROTO_HDR_ETH_ETHERTYPE, /* S-VLAN */ VIRTCHNL_PROTO_HDR_S_VLAN_ID = PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_S_VLAN), /* C-VLAN */ VIRTCHNL_PROTO_HDR_C_VLAN_ID = PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_C_VLAN), /* IPV4 */ VIRTCHNL_PROTO_HDR_IPV4_SRC = PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_IPV4), VIRTCHNL_PROTO_HDR_IPV4_DST, VIRTCHNL_PROTO_HDR_IPV4_DSCP, VIRTCHNL_PROTO_HDR_IPV4_TTL, VIRTCHNL_PROTO_HDR_IPV4_PROT, VIRTCHNL_PROTO_HDR_IPV4_CHKSUM, /* IPV6 */ VIRTCHNL_PROTO_HDR_IPV6_SRC = PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_IPV6), VIRTCHNL_PROTO_HDR_IPV6_DST, VIRTCHNL_PROTO_HDR_IPV6_TC, VIRTCHNL_PROTO_HDR_IPV6_HOP_LIMIT, VIRTCHNL_PROTO_HDR_IPV6_PROT, /* IPV6 Prefix */ VIRTCHNL_PROTO_HDR_IPV6_PREFIX32_SRC, VIRTCHNL_PROTO_HDR_IPV6_PREFIX32_DST, VIRTCHNL_PROTO_HDR_IPV6_PREFIX40_SRC, VIRTCHNL_PROTO_HDR_IPV6_PREFIX40_DST, VIRTCHNL_PROTO_HDR_IPV6_PREFIX48_SRC, VIRTCHNL_PROTO_HDR_IPV6_PREFIX48_DST, VIRTCHNL_PROTO_HDR_IPV6_PREFIX56_SRC, VIRTCHNL_PROTO_HDR_IPV6_PREFIX56_DST, VIRTCHNL_PROTO_HDR_IPV6_PREFIX64_SRC, VIRTCHNL_PROTO_HDR_IPV6_PREFIX64_DST, VIRTCHNL_PROTO_HDR_IPV6_PREFIX96_SRC, VIRTCHNL_PROTO_HDR_IPV6_PREFIX96_DST, /* TCP */ VIRTCHNL_PROTO_HDR_TCP_SRC_PORT = PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_TCP), VIRTCHNL_PROTO_HDR_TCP_DST_PORT, VIRTCHNL_PROTO_HDR_TCP_CHKSUM, /* UDP */ VIRTCHNL_PROTO_HDR_UDP_SRC_PORT = PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_UDP), VIRTCHNL_PROTO_HDR_UDP_DST_PORT, VIRTCHNL_PROTO_HDR_UDP_CHKSUM, /* SCTP */ VIRTCHNL_PROTO_HDR_SCTP_SRC_PORT = PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_SCTP), VIRTCHNL_PROTO_HDR_SCTP_DST_PORT, VIRTCHNL_PROTO_HDR_SCTP_CHKSUM, /* GTPU_IP */ VIRTCHNL_PROTO_HDR_GTPU_IP_TEID = PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_GTPU_IP), /* GTPU_EH */ VIRTCHNL_PROTO_HDR_GTPU_EH_PDU = PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_GTPU_EH), VIRTCHNL_PROTO_HDR_GTPU_EH_QFI, /* PPPOE */ VIRTCHNL_PROTO_HDR_PPPOE_SESS_ID = PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_PPPOE), /* L2TPV3 */ VIRTCHNL_PROTO_HDR_L2TPV3_SESS_ID = PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_L2TPV3), /* ESP */ VIRTCHNL_PROTO_HDR_ESP_SPI = PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_ESP), /* AH */ VIRTCHNL_PROTO_HDR_AH_SPI = PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_AH), /* PFCP */ VIRTCHNL_PROTO_HDR_PFCP_S_FIELD = PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_PFCP), VIRTCHNL_PROTO_HDR_PFCP_SEID, /* GTPC */ VIRTCHNL_PROTO_HDR_GTPC_TEID = PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_GTPC), /* ECPRI */ VIRTCHNL_PROTO_HDR_ECPRI_MSG_TYPE = PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_ECPRI), VIRTCHNL_PROTO_HDR_ECPRI_PC_RTC_ID, /* IPv4 Dummy Fragment */ VIRTCHNL_PROTO_HDR_IPV4_FRAG_PKID = PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_IPV4_FRAG), /* IPv6 Extension Fragment */ VIRTCHNL_PROTO_HDR_IPV6_EH_FRAG_PKID = PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_IPV6_EH_FRAG), /* GTPU_DWN/UP */ VIRTCHNL_PROTO_HDR_GTPU_DWN_QFI = PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_GTPU_EH_PDU_DWN), VIRTCHNL_PROTO_HDR_GTPU_UP_QFI = PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_GTPU_EH_PDU_UP), /* L2TPv2 */ VIRTCHNL_PROTO_HDR_L2TPV2_SESS_ID = PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_L2TPV2), VIRTCHNL_PROTO_HDR_L2TPV2_LEN_SESS_ID,};
struct virtchnl_proto_hdr { /* see enum virtchnl_proto_hdr_type */ s32 type; u32 field_selector; /* a bit mask to select field for header type */ u8 buffer[64]; /** * binary buffer in network order for specific header type. * For example, if type = VIRTCHNL_PROTO_HDR_IPV4, a IPv4 * header is expected to be copied into the buffer. */};
VIRTCHNL_CHECK_STRUCT_LEN(72, virtchnl_proto_hdr);
struct virtchnl_proto_hdrs { u8 tunnel_level; u8 pad[3]; /** * specify where protocol header start from. * must be 0 when sending a raw packet request. * 0 - from the outer layer * 1 - from the first inner layer * 2 - from the second inner layer * .... **/ u32 count; /* the proto layers must < VIRTCHNL_MAX_NUM_PROTO_HDRS */ union { struct virtchnl_proto_hdr proto_hdr[VIRTCHNL_MAX_NUM_PROTO_HDRS]; struct { u16 pkt_len; u8 spec[VIRTCHNL_MAX_SIZE_RAW_PACKET]; u8 mask[VIRTCHNL_MAX_SIZE_RAW_PACKET]; } raw; };};
VIRTCHNL_CHECK_STRUCT_LEN(2312, virtchnl_proto_hdrs);
struct virtchnl_rss_cfg { struct virtchnl_proto_hdrs proto_hdrs; /* protocol headers */
/* see enum virtchnl_rss_algorithm; rss algorithm type */ s32 rss_algorithm; u8 reserved[128]; /* reserve for future */};
VIRTCHNL_CHECK_STRUCT_LEN(2444, virtchnl_rss_cfg);
/* action configuration for FDIR */struct virtchnl_filter_action { /* see enum virtchnl_action type */ s32 type; union { /* used for queue and qgroup action */ struct { u16 index; u8 region; } queue; /* used for count action */ struct { /* share counter ID with other flow rules */ u8 shared; u32 id; /* counter ID */ } count; /* used for mark action */ u32 mark_id; u8 reserve[32]; } act_conf;};
VIRTCHNL_CHECK_STRUCT_LEN(36, virtchnl_filter_action);
#define VIRTCHNL_MAX_NUM_ACTIONS 8
struct virtchnl_filter_action_set { /* action number must be less then VIRTCHNL_MAX_NUM_ACTIONS */ u32 count; struct virtchnl_filter_action actions[VIRTCHNL_MAX_NUM_ACTIONS];};
VIRTCHNL_CHECK_STRUCT_LEN(292, virtchnl_filter_action_set);
/* pattern and action for FDIR rule */struct virtchnl_fdir_rule { struct virtchnl_proto_hdrs proto_hdrs; struct virtchnl_filter_action_set action_set;};
VIRTCHNL_CHECK_STRUCT_LEN(2604, virtchnl_fdir_rule);
/* Status returned to VF after VF requests FDIR commands * VIRTCHNL_FDIR_SUCCESS * VF FDIR related request is successfully done by PF * The request can be OP_ADD/DEL/QUERY_FDIR_FILTER. * * VIRTCHNL_FDIR_FAILURE_RULE_NORESOURCE * OP_ADD_FDIR_FILTER request is failed due to no Hardware resource. * * VIRTCHNL_FDIR_FAILURE_RULE_EXIST * OP_ADD_FDIR_FILTER request is failed due to the rule is already existed. * * VIRTCHNL_FDIR_FAILURE_RULE_CONFLICT * OP_ADD_FDIR_FILTER request is failed due to conflict with existing rule. * * VIRTCHNL_FDIR_FAILURE_RULE_NONEXIST * OP_DEL_FDIR_FILTER request is failed due to this rule doesn't exist. * * VIRTCHNL_FDIR_FAILURE_RULE_INVALID * OP_ADD_FDIR_FILTER request is failed due to parameters validation * or HW doesn't support. * * VIRTCHNL_FDIR_FAILURE_RULE_TIMEOUT * OP_ADD/DEL_FDIR_FILTER request is failed due to timing out * for programming. * * VIRTCHNL_FDIR_FAILURE_QUERY_INVALID * OP_QUERY_FDIR_FILTER request is failed due to parameters validation, * for example, VF query counter of a rule who has no counter action. */enum virtchnl_fdir_prgm_status { VIRTCHNL_FDIR_SUCCESS = 0, VIRTCHNL_FDIR_FAILURE_RULE_NORESOURCE, VIRTCHNL_FDIR_FAILURE_RULE_EXIST, VIRTCHNL_FDIR_FAILURE_RULE_CONFLICT, VIRTCHNL_FDIR_FAILURE_RULE_NONEXIST, VIRTCHNL_FDIR_FAILURE_RULE_INVALID, VIRTCHNL_FDIR_FAILURE_RULE_TIMEOUT, VIRTCHNL_FDIR_FAILURE_QUERY_INVALID,};
/* VIRTCHNL_OP_ADD_FDIR_FILTER * VF sends this request to PF by filling out vsi_id, * validate_only and rule_cfg. PF will return flow_id * if the request is successfully done and return add_status to VF. */struct virtchnl_fdir_add { u16 vsi_id; /* INPUT */ /* * 1 for validating a fdir rule, 0 for creating a fdir rule. * Validate and create share one ops: VIRTCHNL_OP_ADD_FDIR_FILTER. */ u16 validate_only; /* INPUT */ u32 flow_id; /* OUTPUT */ struct virtchnl_fdir_rule rule_cfg; /* INPUT */
/* see enum virtchnl_fdir_prgm_status; OUTPUT */ s32 status;};
VIRTCHNL_CHECK_STRUCT_LEN(2616, virtchnl_fdir_add);
/* VIRTCHNL_OP_DEL_FDIR_FILTER * VF sends this request to PF by filling out vsi_id * and flow_id. PF will return del_status to VF. */struct virtchnl_fdir_del { u16 vsi_id; /* INPUT */ u16 pad; u32 flow_id; /* INPUT */
/* see enum virtchnl_fdir_prgm_status; OUTPUT */ s32 status;};
VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_fdir_del);
#define VIRTCHNL_1588_PTP_CAP_RX_TSTAMP BIT(1)#define VIRTCHNL_1588_PTP_CAP_READ_PHC BIT(2)
/** * struct virtchnl_ptp_caps - Defines the PTP caps available to the VF. * @caps: On send, VF sets what capabilities it requests. On reply, PF * indicates what has been enabled for this VF. The PF shall not set * bits which were not requested by the VF. * @rsvd: Reserved bits for future extension. * * Structure that defines the PTP capabilities available to the VF. The VF * sends VIRTCHNL_OP_1588_PTP_GET_CAPS, and must fill in the ptp_caps field * indicating what capabilities it is requesting. The PF will respond with the * same message with the virtchnl_ptp_caps structure indicating what is * enabled for the VF. * * VIRTCHNL_1588_PTP_CAP_RX_TSTAMP indicates that the VF receive queues have * receive timestamps enabled in the flexible descriptors. Note that this * requires a VF to also negotiate to enable advanced flexible descriptors in * the receive path instead of the default legacy descriptor format. * * VIRTCHNL_1588_PTP_CAP_READ_PHC indicates that the VF may read the PHC time * via the VIRTCHNL_OP_1588_PTP_GET_TIME command. * * Note that in the future, additional capability flags may be added which * indicate additional extended support. All fields marked as reserved by this * header will be set to zero. VF implementations should verify this to ensure * that future extensions do not break compatibility. */struct virtchnl_ptp_caps { u32 caps; u8 rsvd[44];};
VIRTCHNL_CHECK_STRUCT_LEN(48, virtchnl_ptp_caps);
/** * struct virtchnl_phc_time - Contains the 64bits of PHC clock time in ns. * @time: PHC time in nanoseconds * @rsvd: Reserved for future extension * * Structure received with VIRTCHNL_OP_1588_PTP_GET_TIME. Contains the 64bits * of PHC clock time in nanoseconds. * * VIRTCHNL_OP_1588_PTP_GET_TIME may be sent to request the current time of * the PHC. This op is available in case direct access via the PHC registers * is not available. */struct virtchnl_phc_time { u64 time; u8 rsvd[8];};
VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_phc_time);
struct virtchnl_shaper_bw { /* Unit is Kbps */ u32 committed; u32 peak;};
VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_shaper_bw);
/* VIRTCHNL_OP_GET_QOS_CAPS * VF sends this message to get its QoS Caps, such as * TC number, Arbiter and Bandwidth. */struct virtchnl_qos_cap_elem { u8 tc_num; u8 tc_prio;#define VIRTCHNL_ABITER_STRICT 0#define VIRTCHNL_ABITER_ETS 2 u8 arbiter;#define VIRTCHNL_STRICT_WEIGHT 1 u8 weight; enum virtchnl_bw_limit_type type; union { struct virtchnl_shaper_bw shaper; u8 pad2[32]; };};
VIRTCHNL_CHECK_STRUCT_LEN(40, virtchnl_qos_cap_elem);
struct virtchnl_qos_cap_list { u16 vsi_id; u16 num_elem; struct virtchnl_qos_cap_elem cap[];};
VIRTCHNL_CHECK_STRUCT_LEN(4, virtchnl_qos_cap_list);#define virtchnl_qos_cap_list_LEGACY_SIZEOF 44
/* VIRTCHNL_OP_CONFIG_QUEUE_BW */struct virtchnl_queue_bw { u16 queue_id; u8 tc; u8 pad; struct virtchnl_shaper_bw shaper;};
VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_queue_bw);
struct virtchnl_queues_bw_cfg { u16 vsi_id; u16 num_queues; struct virtchnl_queue_bw cfg[];};
VIRTCHNL_CHECK_STRUCT_LEN(4, virtchnl_queues_bw_cfg);#define virtchnl_queues_bw_cfg_LEGACY_SIZEOF 16
enum virtchnl_queue_type { VIRTCHNL_QUEUE_TYPE_TX = 0, VIRTCHNL_QUEUE_TYPE_RX = 1,};
/* structure to specify a chunk of contiguous queues */struct virtchnl_queue_chunk { /* see enum virtchnl_queue_type */ s32 type; u16 start_queue_id; u16 num_queues;};
VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_queue_chunk);
struct virtchnl_quanta_cfg { u16 quanta_size; u16 pad; struct virtchnl_queue_chunk queue_select;};
VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_quanta_cfg);
#define __vss_byone(p, member, count, old) \ (struct_size(p, member, count) + (old - 1 - struct_size(p, member, 0)))
#define __vss_byelem(p, member, count, old) \ (struct_size(p, member, count - 1) + (old - struct_size(p, member, 0)))
#define __vss_full(p, member, count, old) \ (struct_size(p, member, count) + (old - struct_size(p, member, 0)))
#define __vss(type, func, p, member, count) \ struct type: func(p, member, count, type##_LEGACY_SIZEOF)
#define virtchnl_struct_size(p, m, c) \ _Generic(*p, \ __vss(virtchnl_vf_resource, __vss_full, p, m, c), \ __vss(virtchnl_vsi_queue_config_info, __vss_full, p, m, c), \ __vss(virtchnl_irq_map_info, __vss_full, p, m, c), \ __vss(virtchnl_ether_addr_list, __vss_full, p, m, c), \ __vss(virtchnl_vlan_filter_list, __vss_full, p, m, c), \ __vss(virtchnl_vlan_filter_list_v2, __vss_byelem, p, m, c), \ __vss(virtchnl_tc_info, __vss_byelem, p, m, c), \ __vss(virtchnl_rdma_qvlist_info, __vss_byelem, p, m, c), \ __vss(virtchnl_qos_cap_list, __vss_byelem, p, m, c), \ __vss(virtchnl_queues_bw_cfg, __vss_byelem, p, m, c), \ __vss(virtchnl_rss_key, __vss_byone, p, m, c), \ __vss(virtchnl_rss_lut, __vss_byone, p, m, c))
/** * virtchnl_vc_validate_vf_msg * @ver: Virtchnl version info * @v_opcode: Opcode for the message * @msg: pointer to the msg buffer * @msglen: msg length * * validate msg format against struct for each opcode */static inline intvirtchnl_vc_validate_vf_msg(struct virtchnl_version_info *ver, u32 v_opcode, u8 *msg, u16 msglen){ bool err_msg_format = false; u32 valid_len = 0;
/* Validate message length. */ switch (v_opcode) { case VIRTCHNL_OP_VERSION: valid_len = sizeof(struct virtchnl_version_info); break; case VIRTCHNL_OP_RESET_VF: break; case VIRTCHNL_OP_GET_VF_RESOURCES: if (VF_IS_V11(ver)) valid_len = sizeof(u32); break; case VIRTCHNL_OP_CONFIG_TX_QUEUE: valid_len = sizeof(struct virtchnl_txq_info); break; case VIRTCHNL_OP_CONFIG_RX_QUEUE: valid_len = sizeof(struct virtchnl_rxq_info); break; case VIRTCHNL_OP_CONFIG_VSI_QUEUES: valid_len = virtchnl_vsi_queue_config_info_LEGACY_SIZEOF; if (msglen >= valid_len) { struct virtchnl_vsi_queue_config_info *vqc = (struct virtchnl_vsi_queue_config_info *)msg; valid_len = virtchnl_struct_size(vqc, qpair, vqc->num_queue_pairs); if (vqc->num_queue_pairs == 0) err_msg_format = true; } break; case VIRTCHNL_OP_CONFIG_IRQ_MAP: valid_len = virtchnl_irq_map_info_LEGACY_SIZEOF; if (msglen >= valid_len) { struct virtchnl_irq_map_info *vimi = (struct virtchnl_irq_map_info *)msg; valid_len = virtchnl_struct_size(vimi, vecmap, vimi->num_vectors); if (vimi->num_vectors == 0) err_msg_format = true; } break; case VIRTCHNL_OP_ENABLE_QUEUES: case VIRTCHNL_OP_DISABLE_QUEUES: valid_len = sizeof(struct virtchnl_queue_select); break; case VIRTCHNL_OP_ADD_ETH_ADDR: case VIRTCHNL_OP_DEL_ETH_ADDR: valid_len = virtchnl_ether_addr_list_LEGACY_SIZEOF; if (msglen >= valid_len) { struct virtchnl_ether_addr_list *veal = (struct virtchnl_ether_addr_list *)msg; valid_len = virtchnl_struct_size(veal, list, veal->num_elements); if (veal->num_elements == 0) err_msg_format = true; } break; case VIRTCHNL_OP_ADD_VLAN: case VIRTCHNL_OP_DEL_VLAN: valid_len = virtchnl_vlan_filter_list_LEGACY_SIZEOF; if (msglen >= valid_len) { struct virtchnl_vlan_filter_list *vfl = (struct virtchnl_vlan_filter_list *)msg; valid_len = virtchnl_struct_size(vfl, vlan_id, vfl->num_elements); if (vfl->num_elements == 0) err_msg_format = true; } break; case VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE: valid_len = sizeof(struct virtchnl_promisc_info); break; case VIRTCHNL_OP_GET_STATS: valid_len = sizeof(struct virtchnl_queue_select); break; case VIRTCHNL_OP_RDMA: /* These messages are opaque to us and will be validated in * the RDMA client code. We just need to check for nonzero * length. The firmware will enforce max length restrictions. */ if (msglen) valid_len = msglen; else err_msg_format = true; break; case VIRTCHNL_OP_RELEASE_RDMA_IRQ_MAP: break; case VIRTCHNL_OP_CONFIG_RDMA_IRQ_MAP: valid_len = virtchnl_rdma_qvlist_info_LEGACY_SIZEOF; if (msglen >= valid_len) { struct virtchnl_rdma_qvlist_info *qv = (struct virtchnl_rdma_qvlist_info *)msg;
valid_len = virtchnl_struct_size(qv, qv_info, qv->num_vectors); } break; case VIRTCHNL_OP_CONFIG_RSS_KEY: valid_len = virtchnl_rss_key_LEGACY_SIZEOF; if (msglen >= valid_len) { struct virtchnl_rss_key *vrk = (struct virtchnl_rss_key *)msg; valid_len = virtchnl_struct_size(vrk, key, vrk->key_len); } break; case VIRTCHNL_OP_CONFIG_RSS_LUT: valid_len = virtchnl_rss_lut_LEGACY_SIZEOF; if (msglen >= valid_len) { struct virtchnl_rss_lut *vrl = (struct virtchnl_rss_lut *)msg; valid_len = virtchnl_struct_size(vrl, lut, vrl->lut_entries); } break; case VIRTCHNL_OP_CONFIG_RSS_HFUNC: valid_len = sizeof(struct virtchnl_rss_hfunc); break; case VIRTCHNL_OP_GET_RSS_HASHCFG_CAPS: break; case VIRTCHNL_OP_SET_RSS_HASHCFG: valid_len = sizeof(struct virtchnl_rss_hashcfg); break; case VIRTCHNL_OP_ENABLE_VLAN_STRIPPING: case VIRTCHNL_OP_DISABLE_VLAN_STRIPPING: break; case VIRTCHNL_OP_REQUEST_QUEUES: valid_len = sizeof(struct virtchnl_vf_res_request); break; case VIRTCHNL_OP_ENABLE_CHANNELS: valid_len = virtchnl_tc_info_LEGACY_SIZEOF; if (msglen >= valid_len) { struct virtchnl_tc_info *vti = (struct virtchnl_tc_info *)msg; valid_len = virtchnl_struct_size(vti, list, vti->num_tc); if (vti->num_tc == 0) err_msg_format = true; } break; case VIRTCHNL_OP_DISABLE_CHANNELS: break; case VIRTCHNL_OP_ADD_CLOUD_FILTER: case VIRTCHNL_OP_DEL_CLOUD_FILTER: valid_len = sizeof(struct virtchnl_filter); break; case VIRTCHNL_OP_GET_SUPPORTED_RXDIDS: break; case VIRTCHNL_OP_ADD_RSS_CFG: case VIRTCHNL_OP_DEL_RSS_CFG: valid_len = sizeof(struct virtchnl_rss_cfg); break; case VIRTCHNL_OP_ADD_FDIR_FILTER: valid_len = sizeof(struct virtchnl_fdir_add); break; case VIRTCHNL_OP_DEL_FDIR_FILTER: valid_len = sizeof(struct virtchnl_fdir_del); break; case VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS: break; case VIRTCHNL_OP_ADD_VLAN_V2: case VIRTCHNL_OP_DEL_VLAN_V2: valid_len = virtchnl_vlan_filter_list_v2_LEGACY_SIZEOF; if (msglen >= valid_len) { struct virtchnl_vlan_filter_list_v2 *vfl = (struct virtchnl_vlan_filter_list_v2 *)msg;
valid_len = virtchnl_struct_size(vfl, filters, vfl->num_elements);
if (vfl->num_elements == 0) { err_msg_format = true; break; } } break; case VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2: case VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2: case VIRTCHNL_OP_ENABLE_VLAN_INSERTION_V2: case VIRTCHNL_OP_DISABLE_VLAN_INSERTION_V2: valid_len = sizeof(struct virtchnl_vlan_setting); break; case VIRTCHNL_OP_GET_QOS_CAPS: break; case VIRTCHNL_OP_CONFIG_QUEUE_BW: valid_len = virtchnl_queues_bw_cfg_LEGACY_SIZEOF; if (msglen >= valid_len) { struct virtchnl_queues_bw_cfg *q_bw = (struct virtchnl_queues_bw_cfg *)msg;
valid_len = virtchnl_struct_size(q_bw, cfg, q_bw->num_queues); if (q_bw->num_queues == 0) { err_msg_format = true; break; } } break; case VIRTCHNL_OP_CONFIG_QUANTA: valid_len = sizeof(struct virtchnl_quanta_cfg); if (msglen >= valid_len) { struct virtchnl_quanta_cfg *q_quanta = (struct virtchnl_quanta_cfg *)msg;
if (q_quanta->quanta_size == 0 || q_quanta->queue_select.num_queues == 0) { err_msg_format = true; break; } } break; case VIRTCHNL_OP_1588_PTP_GET_CAPS: valid_len = sizeof(struct virtchnl_ptp_caps); break; case VIRTCHNL_OP_1588_PTP_GET_TIME: valid_len = sizeof(struct virtchnl_phc_time); break; /* These are always errors coming from the VF. */ case VIRTCHNL_OP_EVENT: case VIRTCHNL_OP_UNKNOWN: default: return VIRTCHNL_STATUS_ERR_PARAM; } /* few more checks */ if (err_msg_format || valid_len != msglen) return VIRTCHNL_STATUS_ERR_OPCODE_MISMATCH;
return 0;}#endif /* _VIRTCHNL_H_ */