i2c: designware: queue only one read command for block reads
i2c_dw_xfer_msg() pre-queues up to rx_fifo_depth read commands based on the initial msg.len. For I2C_M_RECV_LEN transfers the real length is unknown until the first byte arrives and i2c_dw_recv_len() runs. When a large initial length is passed, the surplus pre-queued reads leave rx_outstanding non-zero after i2c_dw_recv_len() adjusts msg.len, so the completion condition is never met and the transfer times out. In a loop, this repeatedly times out the controller and disrupts unrelated driver-bound devices on the same adapter. Queue only one read command while I2C_M_RECV_LEN is pending. i2c_dw_recv_len() re-enables TX_EMPTY, and the rest are queued once the device-reported length is known. Fixes: c3ae106050b9 ("i2c: designware: Implement support for SMBus block read and write") Signed-off-by: Navon John Lukose <navonjohnlukose@gmail.com> Cc: <stable@vger.kernel.org> # v4.10+ Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>