Something went wrong. Try again.
(I'm so sorry!) Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel os linux
Something went wrong. Try again.
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note *//* * ipmi_smi.h * * MontaVista IPMI system management interface * * Author: MontaVista Software, Inc. * Corey Minyard <minyard@mvista.com> * source@mvista.com * * Copyright 2002 MontaVista Software Inc. * */
#ifndef __LINUX_IPMI_MSGDEFS_H#define __LINUX_IPMI_MSGDEFS_H
/* Various definitions for IPMI messages used by almost everything in the IPMI stack. */
/* NetFNs and commands used inside the IPMI stack. */
#define IPMI_NETFN_SENSOR_EVENT_REQUEST 0x04#define IPMI_NETFN_SENSOR_EVENT_RESPONSE 0x05#define IPMI_GET_EVENT_RECEIVER_CMD 0x01
#define IPMI_NETFN_APP_REQUEST 0x06#define IPMI_NETFN_APP_RESPONSE 0x07#define IPMI_GET_DEVICE_ID_CMD 0x01#define IPMI_COLD_RESET_CMD 0x02#define IPMI_WARM_RESET_CMD 0x03#define IPMI_CLEAR_MSG_FLAGS_CMD 0x30#define IPMI_GET_DEVICE_GUID_CMD 0x08#define IPMI_GET_MSG_FLAGS_CMD 0x31#define IPMI_SEND_MSG_CMD 0x34#define IPMI_GET_MSG_CMD 0x33#define IPMI_SET_BMC_GLOBAL_ENABLES_CMD 0x2e#define IPMI_GET_BMC_GLOBAL_ENABLES_CMD 0x2f#define IPMI_READ_EVENT_MSG_BUFFER_CMD 0x35#define IPMI_GET_CHANNEL_INFO_CMD 0x42
/* Bit for BMC global enables. */#define IPMI_BMC_RCV_MSG_INTR 0x01#define IPMI_BMC_EVT_MSG_INTR 0x02#define IPMI_BMC_EVT_MSG_BUFF 0x04#define IPMI_BMC_SYS_LOG 0x08
#define IPMI_NETFN_STORAGE_REQUEST 0x0a#define IPMI_NETFN_STORAGE_RESPONSE 0x0b#define IPMI_ADD_SEL_ENTRY_CMD 0x44
#define IPMI_NETFN_FIRMWARE_REQUEST 0x08#define IPMI_NETFN_FIRMWARE_RESPONSE 0x09
/* The default slave address */#define IPMI_BMC_SLAVE_ADDR 0x20
/* The BT interface on high-end HP systems supports up to 255 bytes in * one transfer. Its "virtual" BMC supports some commands that are longer * than 128 bytes. Use the full 256, plus NetFn/LUN, Cmd, cCode, plus * some overhead; it's not worth the effort to dynamically size this based * on the results of the "Get BT Capabilities" command. */#define IPMI_MAX_MSG_LENGTH 272 /* multiple of 16 */
#define IPMI_CC_NO_ERROR 0x00#define IPMI_NODE_BUSY_ERR 0xc0#define IPMI_INVALID_COMMAND_ERR 0xc1#define IPMI_TIMEOUT_ERR 0xc3#define IPMI_ERR_MSG_TRUNCATED 0xc6#define IPMI_REQ_LEN_INVALID_ERR 0xc7#define IPMI_REQ_LEN_EXCEEDED_ERR 0xc8#define IPMI_DEVICE_IN_FW_UPDATE_ERR 0xd1#define IPMI_DEVICE_IN_INIT_ERR 0xd2#define IPMI_NOT_IN_MY_STATE_ERR 0xd5 /* IPMI 2.0 */#define IPMI_LOST_ARBITRATION_ERR 0x81#define IPMI_BUS_ERR 0x82#define IPMI_NAK_ON_WRITE_ERR 0x83#define IPMI_ERR_UNSPECIFIED 0xff
#define IPMI_CHANNEL_PROTOCOL_IPMB 1#define IPMI_CHANNEL_PROTOCOL_ICMB 2#define IPMI_CHANNEL_PROTOCOL_SMBUS 4#define IPMI_CHANNEL_PROTOCOL_KCS 5#define IPMI_CHANNEL_PROTOCOL_SMIC 6#define IPMI_CHANNEL_PROTOCOL_BT10 7#define IPMI_CHANNEL_PROTOCOL_BT15 8#define IPMI_CHANNEL_PROTOCOL_TMODE 9
#define IPMI_CHANNEL_MEDIUM_IPMB 1#define IPMI_CHANNEL_MEDIUM_ICMB10 2#define IPMI_CHANNEL_MEDIUM_ICMB09 3#define IPMI_CHANNEL_MEDIUM_8023LAN 4#define IPMI_CHANNEL_MEDIUM_ASYNC 5#define IPMI_CHANNEL_MEDIUM_OTHER_LAN 6#define IPMI_CHANNEL_MEDIUM_PCI_SMBUS 7#define IPMI_CHANNEL_MEDIUM_SMBUS1 8#define IPMI_CHANNEL_MEDIUM_SMBUS2 9#define IPMI_CHANNEL_MEDIUM_USB1 10#define IPMI_CHANNEL_MEDIUM_USB2 11#define IPMI_CHANNEL_MEDIUM_SYSINTF 12#define IPMI_CHANNEL_MEDIUM_OEM_MIN 0x60#define IPMI_CHANNEL_MEDIUM_OEM_MAX 0x7f
#endif /* __LINUX_IPMI_MSGDEFS_H */