Something went wrong. Try again.
(I'm so sorry!) Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel os linux
Something went wrong. Try again.
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677/* SPDX-License-Identifier: GPL-2.0 */#ifndef LINUX_SSB_H_#define LINUX_SSB_H_
#include <linux/device.h>#include <linux/list.h>#include <linux/types.h>#include <linux/spinlock.h>#include <linux/pci.h>#include <linux/gpio/driver.h>#include <linux/device-id/ssb.h>#include <linux/dma-mapping.h>#include <linux/platform_device.h>
#include <linux/ssb/ssb_regs.h>
struct pcmcia_device;struct ssb_bus;struct ssb_driver;
struct ssb_sprom_core_pwr_info { u8 itssi_2g, itssi_5g; u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh; u16 pa_2g[4], pa_5gl[4], pa_5g[4], pa_5gh[4];};
struct ssb_sprom { u8 revision; u8 il0mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11b/g */ u8 et0mac[6] __aligned(sizeof(u16)); /* MAC address for Ethernet */ u8 et1mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11a */ u8 et2mac[6] __aligned(sizeof(u16)); /* MAC address for extra Ethernet */ u8 et0phyaddr; /* MII address for enet0 */ u8 et1phyaddr; /* MII address for enet1 */ u8 et2phyaddr; /* MII address for enet2 */ u8 et0mdcport; /* MDIO for enet0 */ u8 et1mdcport; /* MDIO for enet1 */ u8 et2mdcport; /* MDIO for enet2 */ u16 dev_id; /* Device ID overriding e.g. PCI ID */ u16 board_rev; /* Board revision number from SPROM. */ u16 board_num; /* Board number from SPROM. */ u16 board_type; /* Board type from SPROM. */ u8 country_code; /* Country Code */ char alpha2[2]; /* Country Code as two chars like EU or US */ u8 leddc_on_time; /* LED Powersave Duty Cycle On Count */ u8 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ u16 pa0b0; u16 pa0b1; u16 pa0b2; u16 pa1b0; u16 pa1b1; u16 pa1b2; u16 pa1lob0; u16 pa1lob1; u16 pa1lob2; u16 pa1hib0; u16 pa1hib1; u16 pa1hib2; u8 gpio0; /* GPIO pin 0 */ u8 gpio1; /* GPIO pin 1 */ u8 gpio2; /* GPIO pin 2 */ u8 gpio3; /* GPIO pin 3 */ u8 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ u8 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ u8 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ u8 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ u8 itssi_a; /* Idle TSSI Target for A-PHY */ u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */ u8 tri2g; /* 2.4GHz TX isolation */ u8 tri5gl; /* 5.2GHz TX isolation */ u8 tri5g; /* 5.3GHz TX isolation */ u8 tri5gh; /* 5.8GHz TX isolation */ u8 txpid2g[4]; /* 2GHz TX power index */ u8 txpid5gl[4]; /* 4.9 - 5.1GHz TX power index */ u8 txpid5g[4]; /* 5.1 - 5.5GHz TX power index */ u8 txpid5gh[4]; /* 5.5 - ...GHz TX power index */ s8 rxpo2g; /* 2GHz RX power offset */ s8 rxpo5g; /* 5GHz RX power offset */ u8 rssisav2g; /* 2GHz RSSI params */ u8 rssismc2g; u8 rssismf2g; u8 bxa2g; /* 2GHz BX arch */ u8 rssisav5g; /* 5GHz RSSI params */ u8 rssismc5g; u8 rssismf5g; u8 bxa5g; /* 5GHz BX arch */ u16 cck2gpo; /* CCK power offset */ u32 ofdm2gpo; /* 2.4GHz OFDM power offset */ u32 ofdm5glpo; /* 5.2GHz OFDM power offset */ u32 ofdm5gpo; /* 5.3GHz OFDM power offset */ u32 ofdm5ghpo; /* 5.8GHz OFDM power offset */ u32 boardflags; u32 boardflags2; u32 boardflags3; /* TODO: Switch all drivers to new u32 fields and drop below ones */ u16 boardflags_lo; /* Board flags (bits 0-15) */ u16 boardflags_hi; /* Board flags (bits 16-31) */ u16 boardflags2_lo; /* Board flags (bits 32-47) */ u16 boardflags2_hi; /* Board flags (bits 48-63) */
struct ssb_sprom_core_pwr_info core_pwr_info[4];
/* Antenna gain values for up to 4 antennas * on each band. Values in dBm/4 (Q5.2). Negative gain means the * loss in the connectors is bigger than the gain. */ struct { s8 a0, a1, a2, a3; } antenna_gain;
struct { struct { u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; } ghz2; struct { u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; } ghz5; } fem;
u16 mcs2gpo[8]; u16 mcs5gpo[8]; u16 mcs5glpo[8]; u16 mcs5ghpo[8]; u8 opo;
u8 rxgainerr2ga[3]; u8 rxgainerr5gla[3]; u8 rxgainerr5gma[3]; u8 rxgainerr5gha[3]; u8 rxgainerr5gua[3];
u8 noiselvl2ga[3]; u8 noiselvl5gla[3]; u8 noiselvl5gma[3]; u8 noiselvl5gha[3]; u8 noiselvl5gua[3];
u8 regrev; u8 txchain; u8 rxchain; u8 antswitch; u16 cddpo; u16 stbcpo; u16 bw40po; u16 bwduppo;
u8 tempthresh; u8 tempoffset; u16 rawtempsense; u8 measpower; u8 tempsense_slope; u8 tempcorrx; u8 tempsense_option; u8 freqoffset_corr; u8 iqcal_swp_dis; u8 hw_iqcal_en; u8 elna2g; u8 elna5g; u8 phycal_tempdelta; u8 temps_period; u8 temps_hysteresis; u8 measpower1; u8 measpower2; u8 pcieingress_war;
/* power per rate from sromrev 9 */ u16 cckbw202gpo; u16 cckbw20ul2gpo; u32 legofdmbw202gpo; u32 legofdmbw20ul2gpo; u32 legofdmbw205glpo; u32 legofdmbw20ul5glpo; u32 legofdmbw205gmpo; u32 legofdmbw20ul5gmpo; u32 legofdmbw205ghpo; u32 legofdmbw20ul5ghpo; u32 mcsbw202gpo; u32 mcsbw20ul2gpo; u32 mcsbw402gpo; u32 mcsbw205glpo; u32 mcsbw20ul5glpo; u32 mcsbw405glpo; u32 mcsbw205gmpo; u32 mcsbw20ul5gmpo; u32 mcsbw405gmpo; u32 mcsbw205ghpo; u32 mcsbw20ul5ghpo; u32 mcsbw405ghpo; u16 mcs32po; u16 legofdm40duppo; u8 sar2g; u8 sar5g;};
/* Information about the PCB the circuitry is soldered on. */struct ssb_boardinfo { u16 vendor; u16 type;};
struct ssb_device;/* Lowlevel read/write operations on the device MMIO. * Internal, don't use that outside of ssb. */struct ssb_bus_ops { u8 (*read8)(struct ssb_device *dev, u16 offset); u16 (*read16)(struct ssb_device *dev, u16 offset); u32 (*read32)(struct ssb_device *dev, u16 offset); void (*write8)(struct ssb_device *dev, u16 offset, u8 value); void (*write16)(struct ssb_device *dev, u16 offset, u16 value); void (*write32)(struct ssb_device *dev, u16 offset, u32 value);#ifdef CONFIG_SSB_BLOCKIO void (*block_read)(struct ssb_device *dev, void *buffer, size_t count, u16 offset, u8 reg_width); void (*block_write)(struct ssb_device *dev, const void *buffer, size_t count, u16 offset, u8 reg_width);#endif};
/* Core-ID values. */#define SSB_DEV_CHIPCOMMON 0x800#define SSB_DEV_ILINE20 0x801#define SSB_DEV_SDRAM 0x803#define SSB_DEV_PCI 0x804#define SSB_DEV_MIPS 0x805#define SSB_DEV_ETHERNET 0x806#define SSB_DEV_V90 0x807#define SSB_DEV_USB11_HOSTDEV 0x808#define SSB_DEV_ADSL 0x809#define SSB_DEV_ILINE100 0x80A#define SSB_DEV_IPSEC 0x80B#define SSB_DEV_PCMCIA 0x80D#define SSB_DEV_INTERNAL_MEM 0x80E#define SSB_DEV_MEMC_SDRAM 0x80F#define SSB_DEV_EXTIF 0x811#define SSB_DEV_80211 0x812#define SSB_DEV_MIPS_3302 0x816#define SSB_DEV_USB11_HOST 0x817#define SSB_DEV_USB11_DEV 0x818#define SSB_DEV_USB20_HOST 0x819#define SSB_DEV_USB20_DEV 0x81A#define SSB_DEV_SDIO_HOST 0x81B#define SSB_DEV_ROBOSWITCH 0x81C#define SSB_DEV_PARA_ATA 0x81D#define SSB_DEV_SATA_XORDMA 0x81E#define SSB_DEV_ETHERNET_GBIT 0x81F#define SSB_DEV_PCIE 0x820#define SSB_DEV_MIMO_PHY 0x821#define SSB_DEV_SRAM_CTRLR 0x822#define SSB_DEV_MINI_MACPHY 0x823#define SSB_DEV_ARM_1176 0x824#define SSB_DEV_ARM_7TDMI 0x825#define SSB_DEV_ARM_CM3 0x82A
/* Vendor-ID values */#define SSB_VENDOR_BROADCOM 0x4243
/* Some kernel subsystems poke with dev->drvdata, so we must use the * following ugly workaround to get from struct device to struct ssb_device */struct __ssb_dev_wrapper { struct device dev; struct ssb_device *sdev;};
struct ssb_device { /* Having a copy of the ops pointer in each dev struct * is an optimization. */ const struct ssb_bus_ops *ops;
struct device *dev, *dma_dev;
struct ssb_bus *bus; struct ssb_device_id id;
u8 core_index; unsigned int irq;
/* Internal-only stuff follows. */ void *drvdata; /* Per-device data */ void *devtypedata; /* Per-devicetype (eg 802.11) data */};
/* Go from struct device to struct ssb_device. */static inlinestruct ssb_device * dev_to_ssb_dev(const struct device *dev){ struct __ssb_dev_wrapper *wrap; wrap = container_of(dev, struct __ssb_dev_wrapper, dev); return wrap->sdev;}
/* Device specific user data */static inlinevoid ssb_set_drvdata(struct ssb_device *dev, void *data){ dev->drvdata = data;}static inlinevoid * ssb_get_drvdata(struct ssb_device *dev){ return dev->drvdata;}
/* Devicetype specific user data. This is per device-type (not per device) */void ssb_set_devtypedata(struct ssb_device *dev, void *data);static inlinevoid * ssb_get_devtypedata(struct ssb_device *dev){ return dev->devtypedata;}
struct ssb_driver { const char *name; const struct ssb_device_id *id_table;
int (*probe)(struct ssb_device *dev, const struct ssb_device_id *id); void (*remove)(struct ssb_device *dev); int (*suspend)(struct ssb_device *dev, pm_message_t state); int (*resume)(struct ssb_device *dev); void (*shutdown)(struct ssb_device *dev);
struct device_driver drv;};#define drv_to_ssb_drv(_drv) container_of_const(_drv, struct ssb_driver, drv)
extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner);#define ssb_driver_register(drv) \ __ssb_driver_register(drv, THIS_MODULE)
extern void ssb_driver_unregister(struct ssb_driver *drv);
enum ssb_bustype { SSB_BUSTYPE_SSB, /* This SSB bus is the system bus */ SSB_BUSTYPE_PCI, /* SSB is connected to PCI bus */ SSB_BUSTYPE_PCMCIA, /* SSB is connected to PCMCIA bus */ SSB_BUSTYPE_SDIO, /* SSB is connected to SDIO bus */};
/* board_vendor */#define SSB_BOARDVENDOR_BCM 0x14E4 /* Broadcom */#define SSB_BOARDVENDOR_DELL 0x1028 /* Dell */#define SSB_BOARDVENDOR_HP 0x0E11 /* HP *//* board_type */#define SSB_BOARD_BCM94301CB 0x0406#define SSB_BOARD_BCM94301MP 0x0407#define SSB_BOARD_BU4309 0x040A#define SSB_BOARD_BCM94309CB 0x040B#define SSB_BOARD_BCM4309MP 0x040C#define SSB_BOARD_BU4306 0x0416#define SSB_BOARD_BCM94306MP 0x0418#define SSB_BOARD_BCM4309G 0x0421#define SSB_BOARD_BCM4306CB 0x0417#define SSB_BOARD_BCM94306PC 0x0425 /* pcmcia 3.3v 4306 card */#define SSB_BOARD_BCM94306CBSG 0x042B /* with SiGe PA */#define SSB_BOARD_PCSG94306 0x042D /* with SiGe PA */#define SSB_BOARD_BU4704SD 0x042E /* with sdram */#define SSB_BOARD_BCM94704AGR 0x042F /* dual 11a/11g Router */#define SSB_BOARD_BCM94308MP 0x0430 /* 11a-only minipci */#define SSB_BOARD_BU4318 0x0447#define SSB_BOARD_CB4318 0x0448#define SSB_BOARD_MPG4318 0x0449#define SSB_BOARD_MP4318 0x044A#define SSB_BOARD_SD4318 0x044B#define SSB_BOARD_BCM94306P 0x044C /* with SiGe */#define SSB_BOARD_BCM94303MP 0x044E#define SSB_BOARD_BCM94306MPM 0x0450#define SSB_BOARD_BCM94306MPL 0x0453#define SSB_BOARD_PC4303 0x0454 /* pcmcia */#define SSB_BOARD_BCM94306MPLNA 0x0457#define SSB_BOARD_BCM94306MPH 0x045B#define SSB_BOARD_BCM94306PCIV 0x045C#define SSB_BOARD_BCM94318MPGH 0x0463#define SSB_BOARD_BU4311 0x0464#define SSB_BOARD_BCM94311MC 0x0465#define SSB_BOARD_BCM94311MCAG 0x0466/* 4321 boards */#define SSB_BOARD_BU4321 0x046B#define SSB_BOARD_BU4321E 0x047C#define SSB_BOARD_MP4321 0x046C#define SSB_BOARD_CB2_4321 0x046D#define SSB_BOARD_CB2_4321_AG 0x0066#define SSB_BOARD_MC4321 0x046E/* 4325 boards */#define SSB_BOARD_BCM94325DEVBU 0x0490#define SSB_BOARD_BCM94325BGABU 0x0491#define SSB_BOARD_BCM94325SDGWB 0x0492#define SSB_BOARD_BCM94325SDGMDL 0x04AA#define SSB_BOARD_BCM94325SDGMDL2 0x04C6#define SSB_BOARD_BCM94325SDGMDL3 0x04C9#define SSB_BOARD_BCM94325SDABGWBA 0x04E1/* 4322 boards */#define SSB_BOARD_BCM94322MC 0x04A4#define SSB_BOARD_BCM94322USB 0x04A8 /* dualband */#define SSB_BOARD_BCM94322HM 0x04B0#define SSB_BOARD_BCM94322USB2D 0x04Bf /* single band discrete front end *//* 4312 boards */#define SSB_BOARD_BU4312 0x048A#define SSB_BOARD_BCM4312MCGSG 0x04B5/* chip_package */#define SSB_CHIPPACK_BCM4712S 1 /* Small 200pin 4712 */#define SSB_CHIPPACK_BCM4712M 2 /* Medium 225pin 4712 */#define SSB_CHIPPACK_BCM4712L 0 /* Large 340pin 4712 */
#include <linux/ssb/ssb_driver_chipcommon.h>#include <linux/ssb/ssb_driver_mips.h>#include <linux/ssb/ssb_driver_extif.h>#include <linux/ssb/ssb_driver_pci.h>
struct ssb_bus { /* The MMIO area. */ void __iomem *mmio;
const struct ssb_bus_ops *ops;
/* The core currently mapped into the MMIO window. * Not valid on all host-buses. So don't use outside of SSB. */ struct ssb_device *mapped_device; union { /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */ u8 mapped_pcmcia_seg; /* Current SSB base address window for SDIO. */ u32 sdio_sbaddr; }; /* Lock for core and segment switching. * On PCMCIA-host busses this is used to protect the whole MMIO access. */ spinlock_t bar_lock;
/* The host-bus this backplane is running on. */ enum ssb_bustype bustype; /* Pointers to the host-bus. Check bustype before using any of these pointers. */ union { /* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */ struct pci_dev *host_pci; /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */ struct pcmcia_device *host_pcmcia; /* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */ struct sdio_func *host_sdio; };
/* See enum ssb_quirks */ unsigned int quirks;
#ifdef CONFIG_SSB_SPROM /* Mutex to protect the SPROM writing. */ struct mutex sprom_mutex;#endif
/* ID information about the Chip. */ u16 chip_id; u8 chip_rev; u16 sprom_offset; u16 sprom_size; /* number of words in sprom */ u8 chip_package;
/* List of devices (cores) on the backplane. */ struct ssb_device devices[SSB_MAX_NR_CORES]; u8 nr_devices;
/* Software ID number for this bus. */ unsigned int busnumber;
/* The ChipCommon device (if available). */ struct ssb_chipcommon chipco; /* The PCI-core device (if available). */ struct ssb_pcicore pcicore; /* The MIPS-core device (if available). */ struct ssb_mipscore mipscore; /* The EXTif-core device (if available). */ struct ssb_extif extif;
/* The following structure elements are not available in early * SSB initialization. Though, they are available for regular * registered drivers at any stage. So be careful when * using them in the ssb core code. */
/* ID information about the PCB. */ struct ssb_boardinfo boardinfo; /* Contents of the SPROM. */ struct ssb_sprom sprom; /* If the board has a cardbus slot, this is set to true. */ bool has_cardbus_slot;
#ifdef CONFIG_SSB_EMBEDDED /* Lock for GPIO register access. */ spinlock_t gpio_lock; struct platform_device *watchdog;#endif /* EMBEDDED */#ifdef CONFIG_SSB_DRIVER_GPIO struct gpio_chip gpio; struct irq_domain *irq_domain;#endif /* DRIVER_GPIO */
/* Internal-only stuff follows. Do not touch. */ struct list_head list; /* Is the bus already powered up? */ bool powered_up; int power_warn_count;};
enum ssb_quirks { /* SDIO connected card requires performing a read after writing a 32-bit value */ SSB_QUIRK_SDIO_READ_AFTER_WRITE32 = (1 << 0),};
/* The initialization-invariants. */struct ssb_init_invariants { /* Versioning information about the PCB. */ struct ssb_boardinfo boardinfo; /* The SPROM information. That's either stored in an * EEPROM or NVRAM on the board. */ struct ssb_sprom sprom; /* If the board has a cardbus slot, this is set to true. */ bool has_cardbus_slot;};/* Type of function to fetch the invariants. */typedef int (*ssb_invariants_func_t)(struct ssb_bus *bus, struct ssb_init_invariants *iv);
/* Register SoC bus. */extern int ssb_bus_host_soc_register(struct ssb_bus *bus, unsigned long baseaddr);#ifdef CONFIG_SSB_PCIHOSTextern int ssb_bus_pcibus_register(struct ssb_bus *bus, struct pci_dev *host_pci);#endif /* CONFIG_SSB_PCIHOST */#ifdef CONFIG_SSB_PCMCIAHOSTextern int ssb_bus_pcmciabus_register(struct ssb_bus *bus, struct pcmcia_device *pcmcia_dev, unsigned long baseaddr);#endif /* CONFIG_SSB_PCMCIAHOST */#ifdef CONFIG_SSB_SDIOHOSTextern int ssb_bus_sdiobus_register(struct ssb_bus *bus, struct sdio_func *sdio_func, unsigned int quirks);#endif /* CONFIG_SSB_SDIOHOST */
extern void ssb_bus_unregister(struct ssb_bus *bus);
/* Does the device have an SPROM? */extern bool ssb_is_sprom_available(struct ssb_bus *bus);
/* Set a fallback SPROM. * See kdoc at the function definition for complete documentation. */extern int ssb_arch_register_fallback_sprom( int (*sprom_callback)(struct ssb_bus *bus, struct ssb_sprom *out));
/* Suspend a SSB bus. * Call this from the parent bus suspend routine. */extern int ssb_bus_suspend(struct ssb_bus *bus);/* Resume a SSB bus. * Call this from the parent bus resume routine. */extern int ssb_bus_resume(struct ssb_bus *bus);
extern u32 ssb_clockspeed(struct ssb_bus *bus);
/* Is the device enabled in hardware? */int ssb_device_is_enabled(struct ssb_device *dev);/* Enable a device and pass device-specific SSB_TMSLOW flags. * If no device-specific flags are available, use 0. */void ssb_device_enable(struct ssb_device *dev, u32 core_specific_flags);/* Disable a device in hardware and pass SSB_TMSLOW flags (if any). */void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags);
/* Device MMIO register read/write functions. */static inline u8 ssb_read8(struct ssb_device *dev, u16 offset){ return dev->ops->read8(dev, offset);}static inline u16 ssb_read16(struct ssb_device *dev, u16 offset){ return dev->ops->read16(dev, offset);}static inline u32 ssb_read32(struct ssb_device *dev, u16 offset){ return dev->ops->read32(dev, offset);}static inline void ssb_write8(struct ssb_device *dev, u16 offset, u8 value){ dev->ops->write8(dev, offset, value);}static inline void ssb_write16(struct ssb_device *dev, u16 offset, u16 value){ dev->ops->write16(dev, offset, value);}static inline void ssb_write32(struct ssb_device *dev, u16 offset, u32 value){ dev->ops->write32(dev, offset, value);}#ifdef CONFIG_SSB_BLOCKIOstatic inline void ssb_block_read(struct ssb_device *dev, void *buffer, size_t count, u16 offset, u8 reg_width){ dev->ops->block_read(dev, buffer, count, offset, reg_width);}
static inline void ssb_block_write(struct ssb_device *dev, const void *buffer, size_t count, u16 offset, u8 reg_width){ dev->ops->block_write(dev, buffer, count, offset, reg_width);}#endif /* CONFIG_SSB_BLOCKIO */
/* The SSB DMA API. Use this API for any DMA operation on the device. * This API basically is a wrapper that calls the correct DMA API for * the host device type the SSB device is attached to. */
/* Translation (routing) bits that need to be ORed to DMA * addresses before they are given to a device. */extern u32 ssb_dma_translation(struct ssb_device *dev);#define SSB_DMA_TRANSLATION_MASK 0xC0000000#define SSB_DMA_TRANSLATION_SHIFT 30
#ifdef CONFIG_SSB_PCIHOST/* PCI-host wrapper driver */extern int ssb_pcihost_register(struct pci_driver *driver);static inline void ssb_pcihost_unregister(struct pci_driver *driver){ pci_unregister_driver(driver);}
static inlinevoid ssb_pcihost_set_power_state(struct ssb_device *sdev, pci_power_t state){ if (sdev->bus->bustype == SSB_BUSTYPE_PCI) pci_set_power_state(sdev->bus->host_pci, state);}#elsestatic inline void ssb_pcihost_unregister(struct pci_driver *driver){}
static inlinevoid ssb_pcihost_set_power_state(struct ssb_device *sdev, pci_power_t state){}#endif /* CONFIG_SSB_PCIHOST */
/* If a driver is shutdown or suspended, call this to signal * that the bus may be completely powered down. SSB will decide, * if it's really time to power down the bus, based on if there * are other devices that want to run. */extern int ssb_bus_may_powerdown(struct ssb_bus *bus);/* Before initializing and enabling a device, call this to power-up the bus. * If you want to allow use of dynamic-power-control, pass the flag. * Otherwise static always-on powercontrol will be used. */extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl);
extern void ssb_commit_settings(struct ssb_bus *bus);
/* Various helper functions */extern u32 ssb_admatch_base(u32 adm);extern u32 ssb_admatch_size(u32 adm);
/* PCI device mapping and fixup routines. * Called from the architecture pcibios init code. * These are only available on SSB_EMBEDDED configurations. */#ifdef CONFIG_SSB_EMBEDDEDint ssb_pcibios_plat_dev_init(struct pci_dev *dev);int ssb_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);#endif /* CONFIG_SSB_EMBEDDED */
extern const struct software_node ssb_gpio_swnode;
#endif /* LINUX_SSB_H_ */