Something went wrong. Try again.
(I'm so sorry!) Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel os linux
Something went wrong. Try again.
12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250125112521253125412551256125712581259126012611262126312641265126612671268126912701271127212731274127512761277127812791280128112821283128412851286128712881289129012911292129312941295129612971298129913001301130213031304130513061307130813091310131113121313131413151316131713181319132013211322132313241325132613271328132913301331133213331334133513361337133813391340134113421343134413451346134713481349/* SPDX-License-Identifier: GPL-2.0-or-later *//* * linux/drivers/char/serial_core.h * * Copyright (C) 2000 Deep Blue Solutions Ltd. */#ifndef LINUX_SERIAL_CORE_H#define LINUX_SERIAL_CORE_H
#include <linux/bitops.h>#include <linux/compiler.h>#include <linux/console.h>#include <linux/interrupt.h>#include <linux/lockdep.h>#include <linux/printk.h>#include <linux/spinlock.h>#include <linux/sched.h>#include <linux/tty.h>#include <linux/mutex.h>#include <linux/sysrq.h>#include <uapi/linux/serial_core.h>
#ifdef CONFIG_SERIAL_CORE_CONSOLE#define uart_console(port) \ ((port)->cons && (port)->cons->index == (port)->line)#else#define uart_console(port) ({ (void)port; 0; })#endif
struct uart_port;struct serial_struct;struct serial_port_device;struct device;struct gpio_desc;
/** * struct uart_ops -- interface between serial_core and the driver * * This structure describes all the operations that can be done on the * physical hardware. * * @tx_empty: ``unsigned int ()(struct uart_port *port)`` * * This function tests whether the transmitter fifo and shifter for the * @port is empty. If it is empty, this function should return * %TIOCSER_TEMT, otherwise return 0. If the port does not support this * operation, then it should return %TIOCSER_TEMT. * * Locking: none. * Interrupts: caller dependent. * This call must not sleep * * @set_mctrl: ``void ()(struct uart_port *port, unsigned int mctrl)`` * * This function sets the modem control lines for @port to the state * described by @mctrl. The relevant bits of @mctrl are: * * - %TIOCM_RTS RTS signal. * - %TIOCM_DTR DTR signal. * - %TIOCM_OUT1 OUT1 signal. * - %TIOCM_OUT2 OUT2 signal. * - %TIOCM_LOOP Set the port into loopback mode. * * If the appropriate bit is set, the signal should be driven * active. If the bit is clear, the signal should be driven * inactive. * * Locking: @port->lock taken. * Interrupts: locally disabled. * This call must not sleep * * @get_mctrl: ``unsigned int ()(struct uart_port *port)`` * * Returns the current state of modem control inputs of @port. The state * of the outputs should not be returned, since the core keeps track of * their state. The state information should include: * * - %TIOCM_CAR state of DCD signal * - %TIOCM_CTS state of CTS signal * - %TIOCM_DSR state of DSR signal * - %TIOCM_RI state of RI signal * * The bit is set if the signal is currently driven active. If * the port does not support CTS, DCD or DSR, the driver should * indicate that the signal is permanently active. If RI is * not available, the signal should not be indicated as active. * * Locking: @port->lock taken. * Interrupts: locally disabled. * This call must not sleep * * @stop_tx: ``void ()(struct uart_port *port)`` * * Stop transmitting characters. This might be due to the CTS line * becoming inactive or the tty layer indicating we want to stop * transmission due to an %XOFF character. * * The driver should stop transmitting characters as soon as possible. * * Locking: @port->lock taken. * Interrupts: locally disabled. * This call must not sleep * * @start_tx: ``void ()(struct uart_port *port)`` * * Start transmitting characters. * * Locking: @port->lock taken. * Interrupts: locally disabled. * This call must not sleep * * @throttle: ``void ()(struct uart_port *port)`` * * Notify the serial driver that input buffers for the line discipline are * close to full, and it should somehow signal that no more characters * should be sent to the serial port. * This will be called only if hardware assisted flow control is enabled. * * Locking: serialized with @unthrottle() and termios modification by the * tty layer. * * @unthrottle: ``void ()(struct uart_port *port)`` * * Notify the serial driver that characters can now be sent to the serial * port without fear of overrunning the input buffers of the line * disciplines. * * This will be called only if hardware assisted flow control is enabled. * * Locking: serialized with @throttle() and termios modification by the * tty layer. * * @send_xchar: ``void ()(struct uart_port *port, char ch)`` * * Transmit a high priority character, even if the port is stopped. This * is used to implement XON/XOFF flow control and tcflow(). If the serial * driver does not implement this function, the tty core will append the * character to the circular buffer and then call start_tx() / stop_tx() * to flush the data out. * * Do not transmit if @ch == '\0' (%__DISABLED_CHAR). * * Locking: none. * Interrupts: caller dependent. * * @start_rx: ``void ()(struct uart_port *port)`` * * Start receiving characters. * * Locking: @port->lock taken. * Interrupts: locally disabled. * This call must not sleep * * @stop_rx: ``void ()(struct uart_port *port)`` * * Stop receiving characters; the @port is in the process of being closed. * * Locking: @port->lock taken. * Interrupts: locally disabled. * This call must not sleep * * @enable_ms: ``void ()(struct uart_port *port)`` * * Enable the modem status interrupts. * * This method may be called multiple times. Modem status interrupts * should be disabled when the @shutdown() method is called. * * Locking: @port->lock taken. * Interrupts: locally disabled. * This call must not sleep * * @break_ctl: ``void ()(struct uart_port *port, int ctl)`` * * Control the transmission of a break signal. If @ctl is nonzero, the * break signal should be transmitted. The signal should be terminated * when another call is made with a zero @ctl. * * Locking: caller holds tty_port->mutex * * @startup: ``int ()(struct uart_port *port)`` * * Grab any interrupt resources and initialise any low level driver state. * Enable the port for reception. It should not activate RTS nor DTR; * this will be done via a separate call to @set_mctrl(). * * This method will only be called when the port is initially opened. * * Locking: port_sem taken. * Interrupts: globally disabled. * * @shutdown: ``void ()(struct uart_port *port)`` * * Disable the @port, disable any break condition that may be in effect, * and free any interrupt resources. It should not disable RTS nor DTR; * this will have already been done via a separate call to @set_mctrl(). * * Drivers must not access @port->state once this call has completed. * * This method will only be called when there are no more users of this * @port. * * Locking: port_sem taken. * Interrupts: caller dependent. * * @flush_buffer: ``void ()(struct uart_port *port)`` * * Flush any write buffers, reset any DMA state and stop any ongoing DMA * transfers. * * This will be called whenever the @port->state->xmit circular buffer is * cleared. * * Locking: @port->lock taken. * Interrupts: locally disabled. * This call must not sleep * * @set_termios: ``void ()(struct uart_port *port, struct ktermios *new, * struct ktermios *old)`` * * Change the @port parameters, including word length, parity, stop bits. * Update @port->read_status_mask and @port->ignore_status_mask to * indicate the types of events we are interested in receiving. Relevant * ktermios::c_cflag bits are: * * - %CSIZE - word size * - %CSTOPB - 2 stop bits * - %PARENB - parity enable * - %PARODD - odd parity (when %PARENB is in force) * - %ADDRB - address bit (changed through uart_port::rs485_config()). * - %CREAD - enable reception of characters (if not set, still receive * characters from the port, but throw them away). * - %CRTSCTS - if set, enable CTS status change reporting. * - %CLOCAL - if not set, enable modem status change reporting. * * Relevant ktermios::c_iflag bits are: * * - %INPCK - enable frame and parity error events to be passed to the TTY * layer. * - %BRKINT / %PARMRK - both of these enable break events to be passed to * the TTY layer. * - %IGNPAR - ignore parity and framing errors. * - %IGNBRK - ignore break errors. If %IGNPAR is also set, ignore overrun * errors as well. * * The interaction of the ktermios::c_iflag bits is as follows (parity * error given as an example): * * ============ ======= ======= ========================================= * Parity error INPCK IGNPAR * ============ ======= ======= ========================================= * n/a 0 n/a character received, marked as %TTY_NORMAL * None 1 n/a character received, marked as %TTY_NORMAL * Yes 1 0 character received, marked as %TTY_PARITY * Yes 1 1 character discarded * ============ ======= ======= ========================================= * * Other flags may be used (eg, xon/xoff characters) if your hardware * supports hardware "soft" flow control. * * Locking: caller holds tty_port->mutex * Interrupts: caller dependent. * This call must not sleep * * @set_ldisc: ``void ()(struct uart_port *port, struct ktermios *termios)`` * * Notifier for discipline change. See * Documentation/driver-api/tty/tty_ldisc.rst. * * Locking: caller holds tty_port->mutex * * @pm: ``void ()(struct uart_port *port, unsigned int state, * unsigned int oldstate)`` * * Perform any power management related activities on the specified @port. * @state indicates the new state (defined by enum uart_pm_state), * @oldstate indicates the previous state. * * This function should not be used to grab any resources. * * This will be called when the @port is initially opened and finally * closed, except when the @port is also the system console. This will * occur even if %CONFIG_PM is not set. * * Locking: none. * Interrupts: caller dependent. * * @type: ``const char *()(struct uart_port *port)`` * * Return a pointer to a string constant describing the specified @port, * or return %NULL, in which case the string 'unknown' is substituted. * * Locking: none. * Interrupts: caller dependent. * * @release_port: ``void ()(struct uart_port *port)`` * * Release any memory and IO region resources currently in use by the * @port. * * Locking: none. * Interrupts: caller dependent. * * @request_port: ``int ()(struct uart_port *port)`` * * Request any memory and IO region resources required by the port. If any * fail, no resources should be registered when this function returns, and * it should return -%EBUSY on failure. * * Locking: none. * Interrupts: caller dependent. * * @config_port: ``void ()(struct uart_port *port, int type)`` * * Perform any autoconfiguration steps required for the @port. @type * contains a bit mask of the required configuration. %UART_CONFIG_TYPE * indicates that the port requires detection and identification. * @port->type should be set to the type found, or %PORT_UNKNOWN if no * port was detected. * * %UART_CONFIG_IRQ indicates autoconfiguration of the interrupt signal, * which should be probed using standard kernel autoprobing techniques. * This is not necessary on platforms where ports have interrupts * internally hard wired (eg, system on a chip implementations). * * Locking: none. * Interrupts: caller dependent. * * @verify_port: ``int ()(struct uart_port *port, * struct serial_struct *serinfo)`` * * Verify the new serial port information contained within @serinfo is * suitable for this port type. * * Locking: none. * Interrupts: caller dependent. * * @ioctl: ``int ()(struct uart_port *port, unsigned int cmd, * unsigned long arg)`` * * Perform any port specific IOCTLs. IOCTL commands must be defined using * the standard numbering system found in <asm/ioctl.h>. * * Locking: none. * Interrupts: caller dependent. * * @poll_init: ``int ()(struct uart_port *port)`` * * Called by kgdb to perform the minimal hardware initialization needed to * support @poll_put_char() and @poll_get_char(). Unlike @startup(), this * should not request interrupts. * * Locking: %tty_mutex and tty_port->mutex taken. * Interrupts: n/a. * * @poll_put_char: ``void ()(struct uart_port *port, unsigned char ch)`` * * Called by kgdb to write a single character @ch directly to the serial * @port. It can and should block until there is space in the TX FIFO. * * Locking: none. * Interrupts: caller dependent. * This call must not sleep * * @poll_get_char: ``int ()(struct uart_port *port)`` * * Called by kgdb to read a single character directly from the serial * port. If data is available, it should be returned; otherwise the * function should return %NO_POLL_CHAR immediately. * * Locking: none. * Interrupts: caller dependent. * This call must not sleep */struct uart_ops { unsigned int (*tx_empty)(struct uart_port *); void (*set_mctrl)(struct uart_port *, unsigned int mctrl); unsigned int (*get_mctrl)(struct uart_port *); void (*stop_tx)(struct uart_port *); void (*start_tx)(struct uart_port *); void (*throttle)(struct uart_port *); void (*unthrottle)(struct uart_port *); void (*send_xchar)(struct uart_port *, char ch); void (*stop_rx)(struct uart_port *); void (*start_rx)(struct uart_port *); void (*enable_ms)(struct uart_port *); void (*break_ctl)(struct uart_port *, int ctl); int (*startup)(struct uart_port *); void (*shutdown)(struct uart_port *); void (*flush_buffer)(struct uart_port *); void (*set_termios)(struct uart_port *, struct ktermios *new, const struct ktermios *old); void (*set_ldisc)(struct uart_port *, struct ktermios *); void (*pm)(struct uart_port *, unsigned int state, unsigned int oldstate); const char *(*type)(struct uart_port *); void (*release_port)(struct uart_port *); int (*request_port)(struct uart_port *); void (*config_port)(struct uart_port *, int); int (*verify_port)(struct uart_port *, struct serial_struct *); int (*ioctl)(struct uart_port *, unsigned int, unsigned long);#ifdef CONFIG_CONSOLE_POLL int (*poll_init)(struct uart_port *); void (*poll_put_char)(struct uart_port *, unsigned char); int (*poll_get_char)(struct uart_port *);#endif};
#define NO_POLL_CHAR 0x00ff0000#define UART_CONFIG_TYPE (1 << 0)#define UART_CONFIG_IRQ (1 << 1)
struct uart_icount { __u32 cts; __u32 dsr; __u32 rng; __u32 dcd; __u32 rx; __u32 tx; __u32 frame; __u32 overrun; __u32 parity; __u32 brk; __u32 buf_overrun;};
typedef u64 __bitwise upf_t;typedef unsigned int __bitwise upstat_t;
enum uart_iotype { UPIO_UNKNOWN = -1, UPIO_PORT = SERIAL_IO_PORT, /* 8b I/O port access */ UPIO_HUB6 = SERIAL_IO_HUB6, /* Hub6 ISA card */ UPIO_MEM = SERIAL_IO_MEM, /* driver-specific */ UPIO_MEM32 = SERIAL_IO_MEM32, /* 32b little endian */ UPIO_AU = SERIAL_IO_AU, /* Au1x00 and RT288x type IO */ UPIO_TSI = SERIAL_IO_TSI, /* Tsi108/109 type IO */ UPIO_MEM32BE = SERIAL_IO_MEM32BE, /* 32b big endian */ UPIO_MEM16 = SERIAL_IO_MEM16, /* 16b little endian */ UPIO_BUS = SERIAL_IO_BUS, /* Serial bus I/O access (ex: SPI, I2C) */};
struct uart_port { spinlock_t lock; /* port lock */ unsigned long iobase; /* in/out[bwl] */ unsigned char __iomem *membase; /* read/write[bwl] */ u32 (*serial_in)(struct uart_port *, unsigned int offset); void (*serial_out)(struct uart_port *, unsigned int offset, u32 val); void (*set_termios)(struct uart_port *, struct ktermios *new, const struct ktermios *old); void (*set_ldisc)(struct uart_port *, struct ktermios *); unsigned int (*get_mctrl)(struct uart_port *); void (*set_mctrl)(struct uart_port *, unsigned int); unsigned int (*get_divisor)(struct uart_port *, unsigned int baud, unsigned int *frac); void (*set_divisor)(struct uart_port *, unsigned int baud, unsigned int quot, unsigned int quot_frac); int (*get_rxtrig)(struct uart_port *port); int (*set_rxtrig)(struct uart_port *port, unsigned char bytes); int (*startup)(struct uart_port *port); void (*shutdown)(struct uart_port *port); void (*throttle)(struct uart_port *port); void (*unthrottle)(struct uart_port *port); void (*break_ctl)(struct uart_port *port, int break_state); int (*handle_irq)(struct uart_port *); void (*pm)(struct uart_port *, unsigned int state, unsigned int old); void (*handle_break)(struct uart_port *); int (*rs485_config)(struct uart_port *, struct ktermios *termios, struct serial_rs485 *rs485); int (*iso7816_config)(struct uart_port *, struct serial_iso7816 *iso7816); unsigned int ctrl_id; /* optional serial core controller id */ unsigned int port_id; /* optional serial core port id */ unsigned int irq; /* irq number */ unsigned long irqflags; /* irq flags */ unsigned int uartclk; /* base uart clock */ unsigned int fifosize; /* tx fifo size */ unsigned char x_char; /* xon/xoff char */ unsigned char regshift; /* reg offset shift */
unsigned char quirks; /* internal quirks */
/* internal quirks must be updated while holding port mutex */#define UPQ_NO_TXEN_TEST BIT(0)
enum uart_iotype iotype; /* io access style */
unsigned int read_status_mask; /* driver specific */ unsigned int ignore_status_mask; /* driver specific */ struct uart_state *state; /* pointer to parent state */ struct uart_icount icount; /* statistics */
struct console *cons; /* struct console, if any */ /* flags must be updated while holding port mutex */ upf_t flags;
/* * These flags must be equivalent to the flags defined in * include/uapi/linux/tty_flags.h which are the userspace definitions * assigned from the serial_struct flags in uart_set_info() * [for bit definitions in the UPF_CHANGE_MASK] * * Bits [0..ASYNCB_LAST_USER] are userspace defined/visible/changeable * The remaining bits are serial-core specific and not modifiable by * userspace. */#ifdef CONFIG_HAS_IOPORT#define UPF_FOURPORT ((__force upf_t) ASYNC_FOURPORT /* 1 */ )#else#define UPF_FOURPORT 0#endif#define UPF_SAK ((__force upf_t) ASYNC_SAK /* 2 */ )#define UPF_SPD_HI ((__force upf_t) ASYNC_SPD_HI /* 4 */ )#define UPF_SPD_VHI ((__force upf_t) ASYNC_SPD_VHI /* 5 */ )#define UPF_SPD_CUST ((__force upf_t) ASYNC_SPD_CUST /* 0x0030 */ )#define UPF_SPD_WARP ((__force upf_t) ASYNC_SPD_WARP /* 0x1010 */ )#define UPF_SPD_MASK ((__force upf_t) ASYNC_SPD_MASK /* 0x1030 */ )#define UPF_SKIP_TEST ((__force upf_t) ASYNC_SKIP_TEST /* 6 */ )#define UPF_AUTO_IRQ ((__force upf_t) ASYNC_AUTO_IRQ /* 7 */ )#define UPF_HARDPPS_CD ((__force upf_t) ASYNC_HARDPPS_CD /* 11 */ )#define UPF_SPD_SHI ((__force upf_t) ASYNC_SPD_SHI /* 12 */ )#define UPF_LOW_LATENCY ((__force upf_t) ASYNC_LOW_LATENCY /* 13 */ )#define UPF_BUGGY_UART ((__force upf_t) ASYNC_BUGGY_UART /* 14 */ )#define UPF_MAGIC_MULTIPLIER ((__force upf_t) ASYNC_MAGIC_MULTIPLIER /* 16 */ )
#define UPF_NO_THRE_TEST ((__force upf_t) BIT_ULL(19))/* Port has hardware-assisted h/w flow control */#define UPF_AUTO_CTS ((__force upf_t) BIT_ULL(20))#define UPF_AUTO_RTS ((__force upf_t) BIT_ULL(21))#define UPF_HARD_FLOW ((__force upf_t) (UPF_AUTO_CTS | UPF_AUTO_RTS))/* Port has hardware-assisted s/w flow control */#define UPF_SOFT_FLOW ((__force upf_t) BIT_ULL(22))/* Deprecated: use uart_set_cons_flow_enabled()/uart_cons_flow_enabled() instead. */#define UPF_CONS_FLOW ((__force upf_t) BIT_ULL(23))#define UPF_SHARE_IRQ ((__force upf_t) BIT_ULL(24))#define UPF_EXAR_EFR ((__force upf_t) BIT_ULL(25))#define UPF_BUG_THRE ((__force upf_t) BIT_ULL(26))/* The exact UART type is known and should not be probed. */#define UPF_FIXED_TYPE ((__force upf_t) BIT_ULL(27))#define UPF_BOOT_AUTOCONF ((__force upf_t) BIT_ULL(28))#define UPF_FIXED_PORT ((__force upf_t) BIT_ULL(29))#define UPF_DEAD ((__force upf_t) BIT_ULL(30))#define UPF_IOREMAP ((__force upf_t) BIT_ULL(31))#define UPF_FULL_PROBE ((__force upf_t) BIT_ULL(32))
#define __UPF_CHANGE_MASK 0x17fff#define UPF_CHANGE_MASK ((__force upf_t) __UPF_CHANGE_MASK)#define UPF_USR_MASK ((__force upf_t) (UPF_SPD_MASK|UPF_LOW_LATENCY))
#if __UPF_CHANGE_MASK > ASYNC_FLAGS#error Change mask not equivalent to userspace-visible bit defines#endif
/* * Must hold termios_rwsem, port mutex and port lock to change; * can hold any one lock to read. */ upstat_t status;
#define UPSTAT_CTS_ENABLE ((__force upstat_t) (1 << 0))#define UPSTAT_DCD_ENABLE ((__force upstat_t) (1 << 1))#define UPSTAT_AUTORTS ((__force upstat_t) (1 << 2))#define UPSTAT_AUTOCTS ((__force upstat_t) (1 << 3))#define UPSTAT_AUTOXOFF ((__force upstat_t) (1 << 4))#define UPSTAT_SYNC_FIFO ((__force upstat_t) (1 << 5))
bool hw_stopped; /* sw-assisted CTS flow state */ bool cons_flow; /* user specified console flow control */ unsigned int mctrl; /* current modem ctrl settings */ unsigned int frame_time; /* frame timing in ns */ unsigned int type; /* port type */ const struct uart_ops *ops; unsigned int custom_divisor; unsigned int line; /* port index */ unsigned int minor; resource_size_t mapbase; /* for ioremap */ resource_size_t mapsize; struct device *dev; /* serial port physical parent device */ struct serial_port_device *port_dev; /* serial core port device */
unsigned long sysrq; /* sysrq timeout */ u8 sysrq_ch; /* char for sysrq */ unsigned char has_sysrq; unsigned char sysrq_seq; /* index in sysrq_toggle_seq */
unsigned char hub6; /* this should be in the 8250 driver */ unsigned char suspended; unsigned char console_reinit; const char *name; /* port name */ struct attribute_group *attr_group; /* port specific attributes */ const struct attribute_group **tty_groups; /* all attributes (serial core use only) */ struct serial_rs485 rs485; struct serial_rs485 rs485_supported; /* Supported mask for serial_rs485 */ struct gpio_desc *rs485_term_gpio; /* enable RS485 bus termination */ struct gpio_desc *rs485_rx_during_tx_gpio; /* Output GPIO that sets the state of RS485 RX during TX */ struct serial_iso7816 iso7816; void *private_data; /* generic platform data pointer */};
/* * Only for console->device_lock()/_unlock() callbacks and internal * port lock wrapper synchronization. */static inline void __uart_port_lock_irqsave(struct uart_port *up, unsigned long *flags){ spin_lock_irqsave(&up->lock, *flags);}
/* * Only for console->device_lock()/_unlock() callbacks and internal * port lock wrapper synchronization. */static inline void __uart_port_unlock_irqrestore(struct uart_port *up, unsigned long flags){ spin_unlock_irqrestore(&up->lock, flags);}
/** * uart_port_set_cons - Safely set the @cons field for a uart * @up: The uart port to set * @con: The new console to set to * * This function must be used to set @up->cons. It uses the port lock to * synchronize with the port lock wrappers in order to ensure that the console * cannot change or disappear while another context is holding the port lock. */static inline void uart_port_set_cons(struct uart_port *up, struct console *con){ unsigned long flags;
__uart_port_lock_irqsave(up, &flags); up->cons = con; __uart_port_unlock_irqrestore(up, flags);}
/* Only for internal port lock wrapper usage. */static inline bool __uart_port_using_nbcon(struct uart_port *up){ lockdep_assert_held_once(&up->lock);
if (likely(!uart_console(up))) return false;
/* * @up->cons is only modified under the port lock. Therefore it is * certain that it cannot disappear here. * * @up->cons->node is added/removed from the console list under the * port lock. Therefore it is certain that the registration status * cannot change here, thus @up->cons->flags can be read directly. */ if (hlist_unhashed_lockless(&up->cons->node) || !(up->cons->flags & CON_NBCON) || !up->cons->write_atomic) { return false; }
return true;}
/* Only for internal port lock wrapper usage. */static inline bool __uart_port_nbcon_try_acquire(struct uart_port *up){ if (!__uart_port_using_nbcon(up)) return true;
return nbcon_device_try_acquire(up->cons);}
/* Only for internal port lock wrapper usage. */static inline void __uart_port_nbcon_acquire(struct uart_port *up){ if (!__uart_port_using_nbcon(up)) return;
while (!nbcon_device_try_acquire(up->cons)) cpu_relax();}
/* Only for internal port lock wrapper usage. */static inline void __uart_port_nbcon_release(struct uart_port *up){ if (!__uart_port_using_nbcon(up)) return;
nbcon_device_release(up->cons);}
/** * uart_port_lock - Lock the UART port * @up: Pointer to UART port structure */static inline void uart_port_lock(struct uart_port *up){ spin_lock(&up->lock); __uart_port_nbcon_acquire(up);}
/** * uart_port_lock_irq - Lock the UART port and disable interrupts * @up: Pointer to UART port structure */static inline void uart_port_lock_irq(struct uart_port *up){ spin_lock_irq(&up->lock); __uart_port_nbcon_acquire(up);}
/** * uart_port_lock_irqsave - Lock the UART port, save and disable interrupts * @up: Pointer to UART port structure * @flags: Pointer to interrupt flags storage */static inline void uart_port_lock_irqsave(struct uart_port *up, unsigned long *flags){ spin_lock_irqsave(&up->lock, *flags); __uart_port_nbcon_acquire(up);}
/** * uart_port_trylock - Try to lock the UART port * @up: Pointer to UART port structure * * Returns: True if lock was acquired, false otherwise */static inline bool uart_port_trylock(struct uart_port *up){ if (!spin_trylock(&up->lock)) return false;
if (!__uart_port_nbcon_try_acquire(up)) { spin_unlock(&up->lock); return false; }
return true;}
/** * uart_port_trylock_irqsave - Try to lock the UART port, save and disable interrupts * @up: Pointer to UART port structure * @flags: Pointer to interrupt flags storage * * Returns: True if lock was acquired, false otherwise */static inline bool uart_port_trylock_irqsave(struct uart_port *up, unsigned long *flags){ if (!spin_trylock_irqsave(&up->lock, *flags)) return false;
if (!__uart_port_nbcon_try_acquire(up)) { spin_unlock_irqrestore(&up->lock, *flags); return false; }
return true;}
/** * uart_port_unlock - Unlock the UART port * @up: Pointer to UART port structure */static inline void uart_port_unlock(struct uart_port *up){ __uart_port_nbcon_release(up); spin_unlock(&up->lock);}
/** * uart_port_unlock_irq - Unlock the UART port and re-enable interrupts * @up: Pointer to UART port structure */static inline void uart_port_unlock_irq(struct uart_port *up){ __uart_port_nbcon_release(up); spin_unlock_irq(&up->lock);}
/** * uart_port_unlock_irqrestore - Unlock the UART port, restore interrupts * @up: Pointer to UART port structure * @flags: The saved interrupt flags for restore */static inline void uart_port_unlock_irqrestore(struct uart_port *up, unsigned long flags){ __uart_port_nbcon_release(up); spin_unlock_irqrestore(&up->lock, flags);}
DEFINE_GUARD(uart_port_lock, struct uart_port *, uart_port_lock(_T), uart_port_unlock(_T));DEFINE_GUARD_COND(uart_port_lock, _try, uart_port_trylock(_T));
DEFINE_GUARD(uart_port_lock_irq, struct uart_port *, uart_port_lock_irq(_T), uart_port_unlock_irq(_T));
DEFINE_LOCK_GUARD_1(uart_port_lock_irqsave, struct uart_port, uart_port_lock_irqsave(_T->lock, &_T->flags), uart_port_unlock_irqrestore(_T->lock, _T->flags), unsigned long flags);DEFINE_LOCK_GUARD_1_COND(uart_port_lock_irqsave, _try, uart_port_trylock_irqsave(_T->lock, &_T->flags));
static inline int serial_port_in(struct uart_port *up, int offset){ return up->serial_in(up, offset);}
static inline void serial_port_out(struct uart_port *up, int offset, int value){ up->serial_out(up, offset, value);}
/** * enum uart_pm_state - power states for UARTs * @UART_PM_STATE_ON: UART is powered, up and operational * @UART_PM_STATE_OFF: UART is powered off * @UART_PM_STATE_UNDEFINED: sentinel */enum uart_pm_state { UART_PM_STATE_ON = 0, UART_PM_STATE_OFF = 3, /* number taken from ACPI */ UART_PM_STATE_UNDEFINED,};
/* * This is the state information which is persistent across opens. */struct uart_state { struct tty_port port;
enum uart_pm_state pm_state;
atomic_t refcount; wait_queue_head_t remove_wait; struct uart_port *uart_port;};
#define UART_XMIT_SIZE PAGE_SIZE
/* number of characters left in xmit buffer before we ask for more */#define WAKEUP_CHARS 256
/** * uart_xmit_advance - Advance xmit buffer and account Tx'ed chars * @up: uart_port structure describing the port * @chars: number of characters sent * * This function advances the tail of circular xmit buffer by the number of * @chars transmitted and handles accounting of transmitted bytes (into * @up's icount.tx). */static inline void uart_xmit_advance(struct uart_port *up, unsigned int chars){ struct tty_port *tport = &up->state->port;
kfifo_skip_count(&tport->xmit_fifo, chars); up->icount.tx += chars;}
static inline unsigned int uart_fifo_out(struct uart_port *up, unsigned char *buf, unsigned int chars){ struct tty_port *tport = &up->state->port;
chars = kfifo_out(&tport->xmit_fifo, buf, chars); up->icount.tx += chars;
return chars;}
static inline unsigned int uart_fifo_get(struct uart_port *up, unsigned char *ch){ struct tty_port *tport = &up->state->port; unsigned int chars;
chars = kfifo_get(&tport->xmit_fifo, ch); up->icount.tx += chars;
return chars;}
struct module;struct tty_driver;
struct uart_driver { struct module *owner; const char *driver_name; const char *dev_name; int major; int minor; int nr; struct console *cons;
/* * these are private; the low level driver should not * touch these; they should be initialised to NULL */ struct uart_state *state; struct tty_driver *tty_driver;};
void uart_write_wakeup(struct uart_port *port);
/** * enum UART_TX_FLAGS -- flags for uart_port_tx_flags() * * @UART_TX_NOSTOP: don't call port->ops->stop_tx() on empty buffer */enum UART_TX_FLAGS { UART_TX_NOSTOP = BIT(0),};
#define __uart_port_tx(uport, ch, flags, tx_ready, put_char, tx_done, \ for_test, for_post) \({ \ struct uart_port *__port = (uport); \ struct tty_port *__tport = &__port->state->port; \ unsigned int pending; \ \ for (; (for_test) && (tx_ready); (for_post), __port->icount.tx++) { \ if (__port->x_char) { \ (ch) = __port->x_char; \ (put_char); \ __port->x_char = 0; \ continue; \ } \ \ if (uart_tx_stopped(__port)) \ break; \ \ if (!kfifo_get(&__tport->xmit_fifo, &(ch))) \ break; \ \ (put_char); \ } \ \ (tx_done); \ \ pending = kfifo_len(&__tport->xmit_fifo); \ if (pending < WAKEUP_CHARS) { \ uart_write_wakeup(__port); \ \ if (!((flags) & UART_TX_NOSTOP) && pending == 0) \ __port->ops->stop_tx(__port); \ } \ \ pending; \})
/** * uart_port_tx_limited -- transmit helper for uart_port with count limiting * @port: uart port * @ch: variable to store a character to be written to the HW * @count: a limit of characters to send * @tx_ready: can HW accept more data function * @put_char: function to write a character * @tx_done: function to call after the loop is done * * This helper transmits characters from the xmit buffer to the hardware using * @put_char(). It does so until @count characters are sent and while @tx_ready * evaluates to true. * * Returns: the number of characters in the xmit buffer when done. * * The expression in macro parameters shall be designed as follows: * * **tx_ready:** should evaluate to true if the HW can accept more data to * be sent. This parameter can be %true, which means the HW is always ready. * * **put_char:** shall write @ch to the device of @port. * * **tx_done:** when the write loop is done, this can perform arbitrary * action before potential invocation of ops->stop_tx() happens. If the * driver does not need to do anything, use e.g. ({}). * * For all of them, @port->lock is held, interrupts are locally disabled and * the expressions must not sleep. */#define uart_port_tx_limited(port, ch, count, tx_ready, put_char, tx_done) ({ \ unsigned int __count = (count); \ __uart_port_tx(port, ch, 0, tx_ready, put_char, tx_done, __count, \ __count--); \})
/** * uart_port_tx_limited_flags -- transmit helper for uart_port with count limiting with flags * @port: uart port * @ch: variable to store a character to be written to the HW * @flags: %UART_TX_NOSTOP or similar * @count: a limit of characters to send * @tx_ready: can HW accept more data function * @put_char: function to write a character * @tx_done: function to call after the loop is done * * See uart_port_tx_limited() for more details. */#define uart_port_tx_limited_flags(port, ch, flags, count, tx_ready, put_char, tx_done) ({ \ unsigned int __count = (count); \ __uart_port_tx(port, ch, flags, tx_ready, put_char, tx_done, __count, \ __count--); \})
/** * uart_port_tx -- transmit helper for uart_port * @port: uart port * @ch: variable to store a character to be written to the HW * @tx_ready: can HW accept more data function * @put_char: function to write a character * * See uart_port_tx_limited() for more details. */#define uart_port_tx(port, ch, tx_ready, put_char) \ __uart_port_tx(port, ch, 0, tx_ready, put_char, ({}), true, ({}))
/** * uart_port_tx_flags -- transmit helper for uart_port with flags * @port: uart port * @ch: variable to store a character to be written to the HW * @flags: %UART_TX_NOSTOP or similar * @tx_ready: can HW accept more data function * @put_char: function to write a character * * See uart_port_tx_limited() for more details. */#define uart_port_tx_flags(port, ch, flags, tx_ready, put_char) \ __uart_port_tx(port, ch, flags, tx_ready, put_char, ({}), true, ({}))/* * Baud rate helpers. */void uart_update_timeout(struct uart_port *port, unsigned int cflag, unsigned int baud);unsigned int uart_get_baud_rate(struct uart_port *port, struct ktermios *termios, const struct ktermios *old, unsigned int min, unsigned int max);unsigned int uart_get_divisor(struct uart_port *port, unsigned int baud);
/* * Calculates FIFO drain time. */static inline unsigned long uart_fifo_timeout(struct uart_port *port){ u64 fifo_timeout = (u64)READ_ONCE(port->frame_time) * port->fifosize;
/* Add .02 seconds of slop */ fifo_timeout += 20 * NSEC_PER_MSEC;
return max(nsecs_to_jiffies(fifo_timeout), 1UL);}
/* Base timer interval for polling */static inline unsigned long uart_poll_timeout(struct uart_port *port){ unsigned long timeout = uart_fifo_timeout(port);
return timeout > 6 ? (timeout / 2 - 2) : 1;}
/* * Console helpers. */struct earlycon_device { struct console *con; struct uart_port port; char options[32]; /* e.g., 115200n8 */ unsigned int baud;};
struct earlycon_id { char name[15]; char name_term; /* In case compiler didn't '\0' term name */ char compatible[128]; int (*setup)(struct earlycon_device *, const char *options);};
extern const struct earlycon_id __earlycon_table[];extern const struct earlycon_id __earlycon_table_end[];
#if defined(CONFIG_SERIAL_EARLYCON) && !defined(MODULE)#define EARLYCON_USED_OR_UNUSED __used#else#define EARLYCON_USED_OR_UNUSED __maybe_unused#endif
#define OF_EARLYCON_DECLARE(_name, compat, fn) \ static const struct earlycon_id __UNIQUE_ID(__earlycon_##_name) \ EARLYCON_USED_OR_UNUSED __section("__earlycon_table") \ __aligned(__alignof__(struct earlycon_id)) \ = { .name = __stringify(_name), \ .compatible = compat, \ .setup = fn }
#define EARLYCON_DECLARE(_name, fn) OF_EARLYCON_DECLARE(_name, "", fn)
int of_setup_earlycon(const struct earlycon_id *match, unsigned long node, const char *options);
#ifdef CONFIG_SERIAL_EARLYCONextern bool earlycon_acpi_spcr_enable __initdata;int setup_earlycon(char *buf);#elsestatic const bool earlycon_acpi_spcr_enable EARLYCON_USED_OR_UNUSED;static inline int setup_earlycon(char *buf) { return 0; }#endif
/* Variant of uart_console_registered() when the console_list_lock is held. */static inline bool uart_console_registered_locked(struct uart_port *port){ return uart_console(port) && console_is_registered_locked(port->cons);}
static inline bool uart_console_registered(struct uart_port *port){ return uart_console(port) && console_is_registered(port->cons);}
int uart_parse_earlycon(char *p, enum uart_iotype *iotype, resource_size_t *addr, char **options);void uart_parse_options(const char *options, int *baud, int *parity, int *bits, int *flow);int uart_set_options(struct uart_port *port, struct console *co, int baud, int parity, int bits, int flow);struct tty_driver *uart_console_device(struct console *co, int *index);void uart_console_write(struct uart_port *port, const char *s, unsigned int count, void (*putchar)(struct uart_port *, unsigned char));
/* * Port/driver registration/removal */int uart_register_driver(struct uart_driver *uart);void uart_unregister_driver(struct uart_driver *uart);int uart_add_one_port(struct uart_driver *reg, struct uart_port *port);void uart_remove_one_port(struct uart_driver *reg, struct uart_port *port);int uart_read_port_properties(struct uart_port *port);int uart_read_and_validate_port_properties(struct uart_port *port);
/* * Power Management */int uart_suspend_port(struct uart_driver *reg, struct uart_port *port);int uart_resume_port(struct uart_driver *reg, struct uart_port *port);
static inline int uart_tx_stopped(struct uart_port *port){ struct tty_struct *tty = port->state->port.tty; if ((tty && tty->flow.stopped) || port->hw_stopped) return 1; return 0;}
static inline bool uart_cts_enabled(struct uart_port *uport){ return !!(uport->status & UPSTAT_CTS_ENABLE);}
static inline bool uart_softcts_mode(struct uart_port *uport){ upstat_t mask = UPSTAT_CTS_ENABLE | UPSTAT_AUTOCTS;
return ((uport->status & mask) == UPSTAT_CTS_ENABLE);}
static inline void uart_set_cons_flow_enabled(struct uart_port *uport, bool enabled){ uport->cons_flow = enabled;}
static inline bool uart_cons_flow_enabled(const struct uart_port *uport){ return uport->cons_flow;}
static inline bool uart_console_hwflow_active(struct uart_port *uport){ return uart_console(uport) && !(uport->rs485.flags & SER_RS485_ENABLED) && uart_cons_flow_enabled(uport) && uart_cts_enabled(uport);}
/* * The following are helper functions for the low level drivers. */
void uart_handle_dcd_change(struct uart_port *uport, bool active);void uart_handle_cts_change(struct uart_port *uport, bool active);
void uart_insert_char(struct uart_port *port, unsigned int status, unsigned int overrun, u8 ch, u8 flag);
void uart_xchar_out(struct uart_port *uport, int offset);
#ifdef CONFIG_MAGIC_SYSRQ_SERIAL#define SYSRQ_TIMEOUT (HZ * 5)
bool uart_try_toggle_sysrq(struct uart_port *port, u8 ch);
static inline int uart_handle_sysrq_char(struct uart_port *port, u8 ch){ if (!port->sysrq) return 0;
if (ch && time_before(jiffies, port->sysrq)) { if (sysrq_mask()) { handle_sysrq(ch); port->sysrq = 0; return 1; } if (uart_try_toggle_sysrq(port, ch)) return 1; } port->sysrq = 0;
return 0;}
static inline int uart_prepare_sysrq_char(struct uart_port *port, u8 ch){ if (!port->sysrq) return 0;
if (ch && time_before(jiffies, port->sysrq)) { if (sysrq_mask()) { port->sysrq_ch = ch; port->sysrq = 0; return 1; } if (uart_try_toggle_sysrq(port, ch)) return 1; } port->sysrq = 0;
return 0;}
static inline void uart_unlock_and_check_sysrq(struct uart_port *port){ u8 sysrq_ch;
if (!port->has_sysrq) { uart_port_unlock(port); return; }
sysrq_ch = port->sysrq_ch; port->sysrq_ch = 0;
uart_port_unlock(port);
if (sysrq_ch) handle_sysrq(sysrq_ch);}
static inline void uart_unlock_and_check_sysrq_irqrestore(struct uart_port *port, unsigned long flags){ u8 sysrq_ch;
if (!port->has_sysrq) { uart_port_unlock_irqrestore(port, flags); return; }
sysrq_ch = port->sysrq_ch; port->sysrq_ch = 0;
uart_port_unlock_irqrestore(port, flags);
if (sysrq_ch) handle_sysrq(sysrq_ch);}#else /* CONFIG_MAGIC_SYSRQ_SERIAL */static inline int uart_handle_sysrq_char(struct uart_port *port, u8 ch){ return 0;}static inline int uart_prepare_sysrq_char(struct uart_port *port, u8 ch){ return 0;}static inline void uart_unlock_and_check_sysrq(struct uart_port *port){ uart_port_unlock(port);}static inline void uart_unlock_and_check_sysrq_irqrestore(struct uart_port *port, unsigned long flags){ uart_port_unlock_irqrestore(port, flags);}#endif /* CONFIG_MAGIC_SYSRQ_SERIAL */
/* * Variant of guard(uart_port_lock_irqsave) for IRQ handlers that may capture * a SysRq character via uart_prepare_sysrq_char(). The destructor uses the * sysrq-aware unlock helper so that a captured port->sysrq_ch is dispatched * to handle_sysrq() on scope exit. The plain guard variant silently drops * sysrq_ch and must not be used by callers that process RX. */DEFINE_LOCK_GUARD_1(uart_port_lock_check_sysrq_irqsave, struct uart_port, uart_port_lock_irqsave(_T->lock, &_T->flags), uart_unlock_and_check_sysrq_irqrestore(_T->lock, _T->flags), unsigned long flags);
/* * We do the SysRQ and SAK checking like this... */static inline int uart_handle_break(struct uart_port *port){ struct uart_state *state = port->state;
if (port->handle_break) port->handle_break(port);
#ifdef CONFIG_MAGIC_SYSRQ_SERIAL if (port->has_sysrq && uart_console(port)) { if (!port->sysrq) { port->sysrq = jiffies + SYSRQ_TIMEOUT; return 1; } port->sysrq = 0; }#endif if (port->flags & UPF_SAK) do_SAK(state->port.tty); return 0;}
/* * UART_ENABLE_MS - determine if port should enable modem status irqs */#define UART_ENABLE_MS(port,cflag) ((port)->flags & UPF_HARDPPS_CD || \ (cflag) & CRTSCTS || \ !((cflag) & CLOCAL))
int uart_get_rs485_mode(struct uart_port *port);
void uart_get_ioinfos(struct uart_port *port, char *buf, size_t size);bool uart_iotype_mmio(enum uart_iotype iotype);bool uart_iotype_io(enum uart_iotype iotype);
#endif /* LINUX_SERIAL_CORE_H */