Something went wrong. Try again.
(I'm so sorry!) Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel os linux
Something went wrong. Try again.
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215121612171218121912201221122212231224122512261227122812291230123112321233123412351236123712381239124012411242124312441245124612471248124912501251125212531254125512561257125812591260126112621263126412651266126712681269127012711272127312741275127612771278127912801281128212831284128512861287128812891290129112921293129412951296129712981299130013011302130313041305130613071308130913101311131213131314131513161317131813191320132113221323132413251326132713281329133013311332133313341335133613371338133913401341134213431344134513461347134813491350135113521353135413551356135713581359136013611362136313641365136613671368136913701371137213731374137513761377137813791380138113821383138413851386138713881389139013911392139313941395139613971398139914001401140214031404140514061407140814091410141114121413141414151416141714181419142014211422142314241425142614271428142914301431143214331434143514361437143814391440144114421443144414451446144714481449145014511452145314541455145614571458145914601461146214631464146514661467146814691470147114721473147414751476147714781479148014811482148314841485148614871488148914901491149214931494149514961497149814991500150115021503150415051506150715081509151015111512151315141515151615171518151915201521152215231524152515261527152815291530153115321533153415351536153715381539154015411542154315441545154615471548154915501551155215531554155515561557155815591560156115621563156415651566156715681569157015711572157315741575157615771578157915801581158215831584158515861587158815891590159115921593159415951596159715981599160016011602160316041605160616071608160916101611161216131614161516161617161816191620162116221623162416251626162716281629163016311632163316341635163616371638163916401641/* SPDX-License-Identifier: GPL-2.0-only *//* * Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org> * Steven J. Hill <sjhill@realitydiluted.com> * Thomas Gleixner <tglx@kernel.org> * * Info: * Contains standard defines and IDs for NAND flash devices * * Changelog: * See git changelog. */#ifndef __LINUX_MTD_RAWNAND_H#define __LINUX_MTD_RAWNAND_H
#include <linux/mtd/mtd.h>#include <linux/mtd/nand.h>#include <linux/mtd/flashchip.h>#include <linux/mtd/bbm.h>#include <linux/mtd/jedec.h>#include <linux/mtd/onfi.h>#include <linux/mutex.h>#include <linux/of.h>#include <linux/types.h>
struct nand_chip;struct gpio_desc;
/* The maximum number of NAND chips in an array */#define NAND_MAX_CHIPS 8
/* * Constants for hardware specific CLE/ALE/NCE function * * These are bits which can be or'ed to set/clear multiple * bits in one go. *//* Select the chip by setting nCE to low */#define NAND_NCE 0x01/* Select the command latch by setting CLE to high */#define NAND_CLE 0x02/* Select the address latch by setting ALE to high */#define NAND_ALE 0x04
#define NAND_CTRL_CLE (NAND_NCE | NAND_CLE)#define NAND_CTRL_ALE (NAND_NCE | NAND_ALE)#define NAND_CTRL_CHANGE 0x80
/* * Standard NAND flash commands */#define NAND_CMD_READ0 0#define NAND_CMD_READ1 1#define NAND_CMD_RNDOUT 5#define NAND_CMD_PAGEPROG 0x10#define NAND_CMD_READOOB 0x50#define NAND_CMD_ERASE1 0x60#define NAND_CMD_STATUS 0x70#define NAND_CMD_SEQIN 0x80#define NAND_CMD_RNDIN 0x85#define NAND_CMD_READID 0x90#define NAND_CMD_ERASE2 0xd0#define NAND_CMD_PARAM 0xec#define NAND_CMD_GET_FEATURES 0xee#define NAND_CMD_SET_FEATURES 0xef#define NAND_CMD_RESET 0xff
/* Extended commands for large page devices */#define NAND_CMD_READSTART 0x30#define NAND_CMD_READCACHESEQ 0x31#define NAND_CMD_READCACHEEND 0x3f#define NAND_CMD_RNDOUTSTART 0xE0#define NAND_CMD_CACHEDPROG 0x15
#define NAND_CMD_NONE -1
/* Status bits */#define NAND_STATUS_FAIL 0x01#define NAND_STATUS_FAIL_N1 0x02#define NAND_STATUS_TRUE_READY 0x20#define NAND_STATUS_READY 0x40#define NAND_STATUS_WP 0x80
#define NAND_DATA_IFACE_CHECK_ONLY -1
/* * Constants for Hardware ECC *//* Reset Hardware ECC for read */#define NAND_ECC_READ 0/* Reset Hardware ECC for write */#define NAND_ECC_WRITE 1/* Enable Hardware ECC before syndrome is read back from flash */#define NAND_ECC_READSYN 2
/* * Enable generic NAND 'page erased' check. This check is only done when * ecc.correct() returns -EBADMSG. * Set this flag if your implementation does not fix bitflips in erased * pages and you want to rely on the default implementation. */#define NAND_ECC_GENERIC_ERASED_CHECK BIT(0)
/* * Option constants for bizarre disfunctionality and real * features. */
/* Buswidth is 16 bit */#define NAND_BUSWIDTH_16 BIT(1)
/* * When using software implementation of Hamming, we can specify which byte * ordering should be used. */#define NAND_ECC_SOFT_HAMMING_SM_ORDER BIT(2)
/* Chip has cache program function */#define NAND_CACHEPRG BIT(3)/* Options valid for Samsung large page devices */#define NAND_SAMSUNG_LP_OPTIONS NAND_CACHEPRG
/* * Chip requires ready check on read (for auto-incremented sequential read). * True only for small page devices; large page devices do not support * autoincrement. */#define NAND_NEED_READRDY BIT(8)
/* Chip does not allow subpage writes */#define NAND_NO_SUBPAGE_WRITE BIT(9)
/* Device is one of 'new' xD cards that expose fake nand command set */#define NAND_BROKEN_XD BIT(10)
/* Device behaves just like nand, but is readonly */#define NAND_ROM BIT(11)
/* Device supports subpage reads */#define NAND_SUBPAGE_READ BIT(12)/* Macros to identify the above */#define NAND_HAS_SUBPAGE_READ(chip) ((chip->options & NAND_SUBPAGE_READ))
/* * Some MLC NANDs need data scrambling to limit bitflips caused by repeated * patterns. */#define NAND_NEED_SCRAMBLING BIT(13)
/* Device needs 3rd row address cycle */#define NAND_ROW_ADDR_3 BIT(14)
/* Non chip related options *//* This option skips the bbt scan during initialization. */#define NAND_SKIP_BBTSCAN BIT(16)/* Chip may not exist, so silence any errors in scan */#define NAND_SCAN_SILENT_NODEV BIT(18)
/* * Autodetect nand buswidth with readid/onfi. * This suppose the driver will configure the hardware in 8 bits mode * when calling nand_scan_ident, and update its configuration * before calling nand_scan_tail. */#define NAND_BUSWIDTH_AUTO BIT(19)
/* * This option could be defined by controller drivers to protect against * kmap'ed, vmalloc'ed highmem buffers being passed from upper layers */#define NAND_USES_DMA BIT(20)
/* * In case your controller is implementing ->legacy.cmd_ctrl() and is relying * on the default ->cmdfunc() implementation, you may want to let the core * handle the tCCS delay which is required when a column change (RNDIN or * RNDOUT) is requested. * If your controller already takes care of this delay, you don't need to set * this flag. */#define NAND_WAIT_TCCS BIT(21)
/* * Whether the NAND chip is a boot medium. Drivers might use this information * to select ECC algorithms supported by the boot ROM or similar restrictions. */#define NAND_IS_BOOT_MEDIUM BIT(22)
/* * Do not try to tweak the timings at runtime. This is needed when the * controller initializes the timings on itself or when it relies on * configuration done by the bootloader. */#define NAND_KEEP_TIMINGS BIT(23)
/* * There are different places where the manufacturer stores the factory bad * block markers. * * Position within the block: Each of these pages needs to be checked for a * bad block marking pattern. */#define NAND_BBM_FIRSTPAGE BIT(24)#define NAND_BBM_SECONDPAGE BIT(25)#define NAND_BBM_LASTPAGE BIT(26)
/* * Some controllers with pipelined ECC engines override the BBM marker with * data or ECC bytes, thus making bad block detection through bad block marker * impossible. Let's flag those chips so the core knows it shouldn't check the * BBM and consider all blocks good. */#define NAND_NO_BBM_QUIRK BIT(27)
/* Cell info constants */#define NAND_CI_CHIPNR_MSK 0x03#define NAND_CI_CELLTYPE_MSK 0x0C#define NAND_CI_CELLTYPE_SHIFT 2
/* Position within the OOB data of the page */#define NAND_BBM_POS_SMALL 5#define NAND_BBM_POS_LARGE 0
/** * struct nand_parameters - NAND generic parameters from the parameter page * @model: Model name * @supports_set_get_features: The NAND chip supports setting/getting features * @supports_read_cache: The NAND chip supports read cache operations * @set_feature_list: Bitmap of features that can be set * @get_feature_list: Bitmap of features that can be get * @onfi: ONFI specific parameters */struct nand_parameters { /* Generic parameters */ const char *model; bool supports_set_get_features; bool supports_read_cache; DECLARE_BITMAP(set_feature_list, ONFI_FEATURE_NUMBER); DECLARE_BITMAP(get_feature_list, ONFI_FEATURE_NUMBER);
/* ONFI parameters */ struct onfi_params *onfi;};
/* The maximum expected count of bytes in the NAND ID sequence */#define NAND_MAX_ID_LEN 8
/** * struct nand_id - NAND id structure * @data: buffer containing the id bytes. * @len: ID length. */struct nand_id { u8 data[NAND_MAX_ID_LEN]; int len;};
/** * struct nand_ecc_step_info - ECC step information of ECC engine * @stepsize: data bytes per ECC step * @strengths: array of supported strengths * @nstrengths: number of supported strengths */struct nand_ecc_step_info { int stepsize; const int *strengths; int nstrengths;};
/** * struct nand_ecc_caps - capability of ECC engine * @stepinfos: array of ECC step information * @nstepinfos: number of ECC step information * @calc_ecc_bytes: driver's hook to calculate ECC bytes per step */struct nand_ecc_caps { const struct nand_ecc_step_info *stepinfos; int nstepinfos; int (*calc_ecc_bytes)(int step_size, int strength);};
/* a shorthand to generate struct nand_ecc_caps with only one ECC stepsize */#define NAND_ECC_CAPS_SINGLE(__name, __calc, __step, ...) \static const int __name##_strengths[] = { __VA_ARGS__ }; \static const struct nand_ecc_step_info __name##_stepinfo = { \ .stepsize = __step, \ .strengths = __name##_strengths, \ .nstrengths = ARRAY_SIZE(__name##_strengths), \}; \static const struct nand_ecc_caps __name = { \ .stepinfos = &__name##_stepinfo, \ .nstepinfos = 1, \ .calc_ecc_bytes = __calc, \}
/** * struct nand_ecc_ctrl - Control structure for ECC * @engine_type: ECC engine type * @placement: OOB bytes placement * @algo: ECC algorithm * @steps: number of ECC steps per page * @size: data bytes per ECC step * @bytes: ECC bytes per step * @strength: max number of correctible bits per ECC step * @total: total number of ECC bytes per page * @prepad: padding information for syndrome based ECC generators * @postpad: padding information for syndrome based ECC generators * @options: ECC specific options (see NAND_ECC_XXX flags defined above) * @calc_buf: buffer for calculated ECC, size is oobsize. * @code_buf: buffer for ECC read from flash, size is oobsize. * @hwctl: function to control hardware ECC generator. Must only * be provided if an hardware ECC is available * @calculate: function for ECC calculation or readback from ECC hardware * @correct: function for ECC correction, matching to ECC generator (sw/hw). * Should return a positive number representing the number of * corrected bitflips, -EBADMSG if the number of bitflips exceed * ECC strength, or any other error code if the error is not * directly related to correction. * If -EBADMSG is returned the input buffers should be left * untouched. * @read_page_raw: function to read a raw page without ECC. This function * should hide the specific layout used by the ECC * controller and always return contiguous in-band and * out-of-band data even if they're not stored * contiguously on the NAND chip (e.g. * NAND_ECC_PLACEMENT_INTERLEAVED interleaves in-band and * out-of-band data). * @write_page_raw: function to write a raw page without ECC. This function * should hide the specific layout used by the ECC * controller and consider the passed data as contiguous * in-band and out-of-band data. ECC controller is * responsible for doing the appropriate transformations * to adapt to its specific layout (e.g. * NAND_ECC_PLACEMENT_INTERLEAVED interleaves in-band and * out-of-band data). * @read_page: function to read a page according to the ECC generator * requirements; returns maximum number of bitflips corrected in * any single ECC step, -EIO hw error * @read_subpage: function to read parts of the page covered by ECC; * returns same as read_page() * @write_subpage: function to write parts of the page covered by ECC. * @write_page: function to write a page according to the ECC generator * requirements. * @write_oob_raw: function to write chip OOB data without ECC * @read_oob_raw: function to read chip OOB data without ECC * @read_oob: function to read chip OOB data * @write_oob: function to write chip OOB data */struct nand_ecc_ctrl { enum nand_ecc_engine_type engine_type; enum nand_ecc_placement placement; enum nand_ecc_algo algo; int steps; int size; int bytes; int total; int strength; int prepad; int postpad; unsigned int options; u8 *calc_buf; u8 *code_buf; void (*hwctl)(struct nand_chip *chip, int mode); int (*calculate)(struct nand_chip *chip, const uint8_t *dat, uint8_t *ecc_code); int (*correct)(struct nand_chip *chip, uint8_t *dat, uint8_t *read_ecc, uint8_t *calc_ecc); int (*read_page_raw)(struct nand_chip *chip, uint8_t *buf, int oob_required, int page); int (*write_page_raw)(struct nand_chip *chip, const uint8_t *buf, int oob_required, int page); int (*read_page)(struct nand_chip *chip, uint8_t *buf, int oob_required, int page); int (*read_subpage)(struct nand_chip *chip, uint32_t offs, uint32_t len, uint8_t *buf, int page); int (*write_subpage)(struct nand_chip *chip, uint32_t offset, uint32_t data_len, const uint8_t *data_buf, int oob_required, int page); int (*write_page)(struct nand_chip *chip, const uint8_t *buf, int oob_required, int page); int (*write_oob_raw)(struct nand_chip *chip, int page); int (*read_oob_raw)(struct nand_chip *chip, int page); int (*read_oob)(struct nand_chip *chip, int page); int (*write_oob)(struct nand_chip *chip, int page);};
/** * struct nand_sdr_timings - SDR NAND chip timings * * This struct defines the timing requirements of a SDR NAND chip. * These information can be found in every NAND datasheets and the timings * meaning are described in the ONFI specifications: * https://media-www.micron.com/-/media/client/onfi/specs/onfi_3_1_spec.pdf * (chapter 4.15 Timing Parameters) * * All these timings are expressed in picoseconds. * * @tBERS_max: Block erase time * @tCCS_min: Change column setup time * @tPROG_max: Page program time * @tR_max: Page read time * @tALH_min: ALE hold time * @tADL_min: ALE to data loading time * @tALS_min: ALE setup time * @tAR_min: ALE to RE# delay * @tCEA_max: CE# access time * @tCEH_min: CE# high hold time * @tCH_min: CE# hold time * @tCHZ_max: CE# high to output hi-Z * @tCLH_min: CLE hold time * @tCLR_min: CLE to RE# delay * @tCLS_min: CLE setup time * @tCOH_min: CE# high to output hold * @tCS_min: CE# setup time * @tDH_min: Data hold time * @tDS_min: Data setup time * @tFEAT_max: Busy time for Set Features and Get Features * @tIR_min: Output hi-Z to RE# low * @tITC_max: Interface and Timing Mode Change time * @tRC_min: RE# cycle time * @tREA_max: RE# access time * @tREH_min: RE# high hold time * @tRHOH_min: RE# high to output hold * @tRHW_min: RE# high to WE# low * @tRHZ_max: RE# high to output hi-Z * @tRLOH_min: RE# low to output hold * @tRP_min: RE# pulse width * @tRR_min: Ready to RE# low (data only) * @tRST_max: Device reset time, measured from the falling edge of R/B# to the * rising edge of R/B#. * @tWB_max: WE# high to SR[6] low * @tWC_min: WE# cycle time * @tWH_min: WE# high hold time * @tWHR_min: WE# high to RE# low * @tWP_min: WE# pulse width * @tWW_min: WP# transition to WE# low */struct nand_sdr_timings { u64 tBERS_max; u32 tCCS_min; u64 tPROG_max; u64 tR_max; u32 tALH_min; u32 tADL_min; u32 tALS_min; u32 tAR_min; u32 tCEA_max; u32 tCEH_min; u32 tCH_min; u32 tCHZ_max; u32 tCLH_min; u32 tCLR_min; u32 tCLS_min; u32 tCOH_min; u32 tCS_min; u32 tDH_min; u32 tDS_min; u32 tFEAT_max; u32 tIR_min; u32 tITC_max; u32 tRC_min; u32 tREA_max; u32 tREH_min; u32 tRHOH_min; u32 tRHW_min; u32 tRHZ_max; u32 tRLOH_min; u32 tRP_min; u32 tRR_min; u64 tRST_max; u32 tWB_max; u32 tWC_min; u32 tWH_min; u32 tWHR_min; u32 tWP_min; u32 tWW_min;};
/** * struct nand_nvddr_timings - NV-DDR NAND chip timings * * This struct defines the timing requirements of a NV-DDR NAND data interface. * These information can be found in every NAND datasheets and the timings * meaning are described in the ONFI specifications: * https://media-www.micron.com/-/media/client/onfi/specs/onfi_4_1_gold.pdf * (chapter 4.18.2 NV-DDR) * * All these timings are expressed in picoseconds. * * @tBERS_max: Block erase time * @tCCS_min: Change column setup time * @tPROG_max: Page program time * @tR_max: Page read time * @tAC_min: Access window of DQ[7:0] from CLK * @tAC_max: Access window of DQ[7:0] from CLK * @tADL_min: ALE to data loading time * @tCAD_min: Command, Address, Data delay * @tCAH_min: Command/Address DQ hold time * @tCALH_min: W/R_n, CLE and ALE hold time * @tCALS_min: W/R_n, CLE and ALE setup time * @tCAS_min: Command/address DQ setup time * @tCEH_min: CE# high hold time * @tCH_min: CE# hold time * @tCK_min: Average clock cycle time * @tCS_min: CE# setup time * @tDH_min: Data hold time * @tDQSCK_min: Start of the access window of DQS from CLK * @tDQSCK_max: End of the access window of DQS from CLK * @tDQSD_min: Min W/R_n low to DQS/DQ driven by device * @tDQSD_max: Max W/R_n low to DQS/DQ driven by device * @tDQSHZ_max: W/R_n high to DQS/DQ tri-state by device * @tDQSQ_max: DQS-DQ skew, DQS to last DQ valid, per access * @tDS_min: Data setup time * @tDSC_min: DQS cycle time * @tFEAT_max: Busy time for Set Features and Get Features * @tITC_max: Interface and Timing Mode Change time * @tQHS_max: Data hold skew factor * @tRHW_min: Data output cycle to command, address, or data input cycle * @tRR_min: Ready to RE# low (data only) * @tRST_max: Device reset time, measured from the falling edge of R/B# to the * rising edge of R/B#. * @tWB_max: WE# high to SR[6] low * @tWHR_min: WE# high to RE# low * @tWRCK_min: W/R_n low to data output cycle * @tWW_min: WP# transition to WE# low */struct nand_nvddr_timings { u64 tBERS_max; u32 tCCS_min; u64 tPROG_max; u64 tR_max; u32 tAC_min; u32 tAC_max; u32 tADL_min; u32 tCAD_min; u32 tCAH_min; u32 tCALH_min; u32 tCALS_min; u32 tCAS_min; u32 tCEH_min; u32 tCH_min; u32 tCK_min; u32 tCS_min; u32 tDH_min; u32 tDQSCK_min; u32 tDQSCK_max; u32 tDQSD_min; u32 tDQSD_max; u32 tDQSHZ_max; u32 tDQSQ_max; u32 tDS_min; u32 tDSC_min; u32 tFEAT_max; u32 tITC_max; u32 tQHS_max; u32 tRHW_min; u32 tRR_min; u32 tRST_max; u32 tWB_max; u32 tWHR_min; u32 tWRCK_min; u32 tWW_min;};
/* * While timings related to the data interface itself are mostly different * between SDR and NV-DDR, timings related to the internal chip behavior are * common. IOW, the following entries which describe the internal delays have * the same definition and are shared in both SDR and NV-DDR timing structures: * - tADL_min * - tBERS_max * - tCCS_min * - tFEAT_max * - tPROG_max * - tR_max * - tRR_min * - tRST_max * - tWB_max * * The below macros return the value of a given timing, no matter the interface. */#define NAND_COMMON_TIMING_PS(conf, timing_name) \ nand_interface_is_sdr(conf) ? \ nand_get_sdr_timings(conf)->timing_name : \ nand_get_nvddr_timings(conf)->timing_name
#define NAND_COMMON_TIMING_MS(conf, timing_name) \ PSEC_TO_MSEC(NAND_COMMON_TIMING_PS((conf), timing_name))
#define NAND_COMMON_TIMING_NS(conf, timing_name) \ PSEC_TO_NSEC(NAND_COMMON_TIMING_PS((conf), timing_name))
/** * enum nand_interface_type - NAND interface type * @NAND_SDR_IFACE: Single Data Rate interface * @NAND_NVDDR_IFACE: Double Data Rate interface */enum nand_interface_type { NAND_SDR_IFACE, NAND_NVDDR_IFACE,};
/** * struct nand_interface_config - NAND interface timing * @type: type of the timing * @timings: The timing information * @timings.mode: Timing mode as defined in the specification * @timings.sdr: Use it when @type is %NAND_SDR_IFACE. * @timings.nvddr: Use it when @type is %NAND_NVDDR_IFACE. */struct nand_interface_config { enum nand_interface_type type; struct nand_timings { unsigned int mode; union { struct nand_sdr_timings sdr; struct nand_nvddr_timings nvddr; }; } timings;};
/** * nand_interface_is_sdr - get the interface type * @conf: The data interface */static bool nand_interface_is_sdr(const struct nand_interface_config *conf){ return conf->type == NAND_SDR_IFACE;}
/** * nand_interface_is_nvddr - get the interface type * @conf: The data interface */static bool nand_interface_is_nvddr(const struct nand_interface_config *conf){ return conf->type == NAND_NVDDR_IFACE;}
/** * nand_get_sdr_timings - get SDR timing from data interface * @conf: The data interface */static inline const struct nand_sdr_timings *nand_get_sdr_timings(const struct nand_interface_config *conf){ if (!nand_interface_is_sdr(conf)) return ERR_PTR(-EINVAL);
return &conf->timings.sdr;}
/** * nand_get_nvddr_timings - get NV-DDR timing from data interface * @conf: The data interface */static inline const struct nand_nvddr_timings *nand_get_nvddr_timings(const struct nand_interface_config *conf){ if (!nand_interface_is_nvddr(conf)) return ERR_PTR(-EINVAL);
return &conf->timings.nvddr;}
/** * struct nand_op_cmd_instr - Definition of a command instruction * @opcode: the command to issue in one cycle */struct nand_op_cmd_instr { u8 opcode;};
/** * struct nand_op_addr_instr - Definition of an address instruction * @naddrs: length of the @addrs array * @addrs: array containing the address cycles to issue */struct nand_op_addr_instr { unsigned int naddrs; const u8 *addrs;};
/** * struct nand_op_data_instr - Definition of a data instruction * @len: number of data bytes to move * @buf: buffer to fill * @buf.in: buffer to fill when reading from the NAND chip * @buf.out: buffer to read from when writing to the NAND chip * @force_8bit: force 8-bit access * * Please note that "in" and "out" are inverted from the ONFI specification * and are from the controller perspective, so a "in" is a read from the NAND * chip while a "out" is a write to the NAND chip. */struct nand_op_data_instr { unsigned int len; union { void *in; const void *out; } buf; bool force_8bit;};
/** * struct nand_op_waitrdy_instr - Definition of a wait ready instruction * @timeout_ms: maximum delay while waiting for the ready/busy pin in ms */struct nand_op_waitrdy_instr { unsigned int timeout_ms;};
/** * enum nand_op_instr_type - Definition of all instruction types * @NAND_OP_CMD_INSTR: command instruction * @NAND_OP_ADDR_INSTR: address instruction * @NAND_OP_DATA_IN_INSTR: data in instruction * @NAND_OP_DATA_OUT_INSTR: data out instruction * @NAND_OP_WAITRDY_INSTR: wait ready instruction */enum nand_op_instr_type { NAND_OP_CMD_INSTR, NAND_OP_ADDR_INSTR, NAND_OP_DATA_IN_INSTR, NAND_OP_DATA_OUT_INSTR, NAND_OP_WAITRDY_INSTR,};
/** * struct nand_op_instr - Instruction object * @type: the instruction type * @ctx: extra data associated to the instruction. You'll have to use the * appropriate element depending on @type * @ctx.cmd: use it if @type is %NAND_OP_CMD_INSTR * @ctx.addr: use it if @type is %NAND_OP_ADDR_INSTR * @ctx.data: use it if @type is %NAND_OP_DATA_IN_INSTR * or %NAND_OP_DATA_OUT_INSTR * @ctx.waitrdy: use it if @type is %NAND_OP_WAITRDY_INSTR * @delay_ns: delay the controller should apply after the instruction has been * issued on the bus. Most modern controllers have internal timings * control logic, and in this case, the controller driver can ignore * this field. */struct nand_op_instr { enum nand_op_instr_type type; union { struct nand_op_cmd_instr cmd; struct nand_op_addr_instr addr; struct nand_op_data_instr data; struct nand_op_waitrdy_instr waitrdy; } ctx; unsigned int delay_ns;};
/* * Special handling must be done for the WAITRDY timeout parameter as it usually * is either tPROG (after a prog), tR (before a read), tRST (during a reset) or * tBERS (during an erase) which all of them are u64 values that cannot be * divided by usual kernel macros and must be handled with the special * DIV_ROUND_UP_ULL() macro. * * Cast to type of dividend is needed here to guarantee that the result won't * be an unsigned long long when the dividend is an unsigned long (or smaller), * which is what the compiler does when it sees ternary operator with 2 * different return types (picks the largest type to make sure there's no * loss). */#define __DIVIDE(dividend, divisor) ({ \ (__typeof__(dividend))(sizeof(dividend) <= sizeof(unsigned long) ? \ DIV_ROUND_UP(dividend, divisor) : \ DIV_ROUND_UP_ULL(dividend, divisor)); \ })#define PSEC_TO_NSEC(x) __DIVIDE(x, 1000)#define PSEC_TO_MSEC(x) __DIVIDE(x, 1000000000)
#define NAND_OP_CMD(id, ns) \ { \ .type = NAND_OP_CMD_INSTR, \ .ctx.cmd.opcode = id, \ .delay_ns = ns, \ }
#define NAND_OP_ADDR(ncycles, cycles, ns) \ { \ .type = NAND_OP_ADDR_INSTR, \ .ctx.addr = { \ .naddrs = ncycles, \ .addrs = cycles, \ }, \ .delay_ns = ns, \ }
#define NAND_OP_DATA_IN(l, b, ns) \ { \ .type = NAND_OP_DATA_IN_INSTR, \ .ctx.data = { \ .len = l, \ .buf.in = b, \ .force_8bit = false, \ }, \ .delay_ns = ns, \ }
#define NAND_OP_DATA_OUT(l, b, ns) \ { \ .type = NAND_OP_DATA_OUT_INSTR, \ .ctx.data = { \ .len = l, \ .buf.out = b, \ .force_8bit = false, \ }, \ .delay_ns = ns, \ }
#define NAND_OP_8BIT_DATA_IN(l, b, ns) \ { \ .type = NAND_OP_DATA_IN_INSTR, \ .ctx.data = { \ .len = l, \ .buf.in = b, \ .force_8bit = true, \ }, \ .delay_ns = ns, \ }
#define NAND_OP_8BIT_DATA_OUT(l, b, ns) \ { \ .type = NAND_OP_DATA_OUT_INSTR, \ .ctx.data = { \ .len = l, \ .buf.out = b, \ .force_8bit = true, \ }, \ .delay_ns = ns, \ }
#define NAND_OP_WAIT_RDY(tout_ms, ns) \ { \ .type = NAND_OP_WAITRDY_INSTR, \ .ctx.waitrdy.timeout_ms = tout_ms, \ .delay_ns = ns, \ }
/** * struct nand_subop - a sub operation * @cs: the CS line to select for this NAND sub-operation * @instrs: array of instructions * @ninstrs: length of the @instrs array * @first_instr_start_off: offset to start from for the first instruction * of the sub-operation * @last_instr_end_off: offset to end at (excluded) for the last instruction * of the sub-operation * * Both @first_instr_start_off and @last_instr_end_off only apply to data or * address instructions. * * When an operation cannot be handled as is by the NAND controller, it will * be split by the parser into sub-operations which will be passed to the * controller driver. */struct nand_subop { unsigned int cs; const struct nand_op_instr *instrs; unsigned int ninstrs; unsigned int first_instr_start_off; unsigned int last_instr_end_off;};
unsigned int nand_subop_get_addr_start_off(const struct nand_subop *subop, unsigned int op_id);unsigned int nand_subop_get_num_addr_cyc(const struct nand_subop *subop, unsigned int op_id);unsigned int nand_subop_get_data_start_off(const struct nand_subop *subop, unsigned int op_id);unsigned int nand_subop_get_data_len(const struct nand_subop *subop, unsigned int op_id);
/** * struct nand_op_parser_addr_constraints - Constraints for address instructions * @maxcycles: maximum number of address cycles the controller can issue in a * single step */struct nand_op_parser_addr_constraints { unsigned int maxcycles;};
/** * struct nand_op_parser_data_constraints - Constraints for data instructions * @maxlen: maximum data length that the controller can handle in a single step */struct nand_op_parser_data_constraints { unsigned int maxlen;};
/** * struct nand_op_parser_pattern_elem - One element of a pattern * @type: the instructuction type * @optional: whether this element of the pattern is optional or mandatory * @ctx: address or data constraint * @ctx.addr: address constraint (number of cycles) * @ctx.data: data constraint (data length) */struct nand_op_parser_pattern_elem { enum nand_op_instr_type type; bool optional; union { struct nand_op_parser_addr_constraints addr; struct nand_op_parser_data_constraints data; } ctx;};
#define NAND_OP_PARSER_PAT_CMD_ELEM(_opt) \ { \ .type = NAND_OP_CMD_INSTR, \ .optional = _opt, \ }
#define NAND_OP_PARSER_PAT_ADDR_ELEM(_opt, _maxcycles) \ { \ .type = NAND_OP_ADDR_INSTR, \ .optional = _opt, \ .ctx.addr.maxcycles = _maxcycles, \ }
#define NAND_OP_PARSER_PAT_DATA_IN_ELEM(_opt, _maxlen) \ { \ .type = NAND_OP_DATA_IN_INSTR, \ .optional = _opt, \ .ctx.data.maxlen = _maxlen, \ }
#define NAND_OP_PARSER_PAT_DATA_OUT_ELEM(_opt, _maxlen) \ { \ .type = NAND_OP_DATA_OUT_INSTR, \ .optional = _opt, \ .ctx.data.maxlen = _maxlen, \ }
#define NAND_OP_PARSER_PAT_WAITRDY_ELEM(_opt) \ { \ .type = NAND_OP_WAITRDY_INSTR, \ .optional = _opt, \ }
/** * struct nand_op_parser_pattern - NAND sub-operation pattern descriptor * @elems: array of pattern elements * @nelems: number of pattern elements in @elems array * @exec: the function that will issue a sub-operation * * A pattern is a list of elements, each element reprensenting one instruction * with its constraints. The pattern itself is used by the core to match NAND * chip operation with NAND controller operations. * Once a match between a NAND controller operation pattern and a NAND chip * operation (or a sub-set of a NAND operation) is found, the pattern ->exec() * hook is called so that the controller driver can issue the operation on the * bus. * * Controller drivers should declare as many patterns as they support and pass * this list of patterns (created with the help of the following macro) to * the nand_op_parser_exec_op() helper. */struct nand_op_parser_pattern { const struct nand_op_parser_pattern_elem *elems; unsigned int nelems; int (*exec)(struct nand_chip *chip, const struct nand_subop *subop);};
#define NAND_OP_PARSER_PATTERN(_exec, ...) \ { \ .exec = _exec, \ .elems = (const struct nand_op_parser_pattern_elem[]) { __VA_ARGS__ }, \ .nelems = sizeof((struct nand_op_parser_pattern_elem[]) { __VA_ARGS__ }) / \ sizeof(struct nand_op_parser_pattern_elem), \ }
/** * struct nand_op_parser - NAND controller operation parser descriptor * @patterns: array of supported patterns * @npatterns: length of the @patterns array * * The parser descriptor is just an array of supported patterns which will be * iterated by nand_op_parser_exec_op() everytime it tries to execute an * NAND operation (or tries to determine if a specific operation is supported). * * It is worth mentioning that patterns will be tested in their declaration * order, and the first match will be taken, so it's important to order patterns * appropriately so that simple/inefficient patterns are placed at the end of * the list. Usually, this is where you put single instruction patterns. */struct nand_op_parser { const struct nand_op_parser_pattern *patterns; unsigned int npatterns;};
#define NAND_OP_PARSER(...) \ { \ .patterns = (const struct nand_op_parser_pattern[]) { __VA_ARGS__ }, \ .npatterns = sizeof((struct nand_op_parser_pattern[]) { __VA_ARGS__ }) / \ sizeof(struct nand_op_parser_pattern), \ }
/** * struct nand_operation - NAND operation descriptor * @cs: the CS line to select for this NAND operation * @deassert_wp: set to true when the operation requires the WP pin to be * de-asserted (ERASE, PROG, ...) * @instrs: array of instructions to execute * @ninstrs: length of the @instrs array * * The actual operation structure that will be passed to chip->exec_op(). */struct nand_operation { unsigned int cs; bool deassert_wp; const struct nand_op_instr *instrs; unsigned int ninstrs;};
#define NAND_OPERATION(_cs, _instrs) \ { \ .cs = _cs, \ .instrs = _instrs, \ .ninstrs = ARRAY_SIZE(_instrs), \ }
#define NAND_DESTRUCTIVE_OPERATION(_cs, _instrs) \ { \ .cs = _cs, \ .deassert_wp = true, \ .instrs = _instrs, \ .ninstrs = ARRAY_SIZE(_instrs), \ }
int nand_op_parser_exec_op(struct nand_chip *chip, const struct nand_op_parser *parser, const struct nand_operation *op, bool check_only);
static inline void nand_op_trace(const char *prefix, const struct nand_op_instr *instr){#if IS_ENABLED(CONFIG_DYNAMIC_DEBUG) || defined(DEBUG) switch (instr->type) { case NAND_OP_CMD_INSTR: pr_debug("%sCMD [0x%02x]\n", prefix, instr->ctx.cmd.opcode); break; case NAND_OP_ADDR_INSTR: pr_debug("%sADDR [%d cyc: %*ph]\n", prefix, instr->ctx.addr.naddrs, instr->ctx.addr.naddrs < 64 ? instr->ctx.addr.naddrs : 64, instr->ctx.addr.addrs); break; case NAND_OP_DATA_IN_INSTR: pr_debug("%sDATA_IN [%d B%s]\n", prefix, instr->ctx.data.len, instr->ctx.data.force_8bit ? ", force 8-bit" : ""); break; case NAND_OP_DATA_OUT_INSTR: pr_debug("%sDATA_OUT [%d B%s]\n", prefix, instr->ctx.data.len, instr->ctx.data.force_8bit ? ", force 8-bit" : ""); break; case NAND_OP_WAITRDY_INSTR: pr_debug("%sWAITRDY [max %d ms]\n", prefix, instr->ctx.waitrdy.timeout_ms); break; }#endif}
/** * struct nand_controller_ops - Controller operations * * @attach_chip: this method is called after the NAND detection phase after * flash ID and MTD fields such as erase size, page size and OOB * size have been set up. ECC requirements are available if * provided by the NAND chip or device tree. Typically used to * choose the appropriate ECC configuration and allocate * associated resources. * This hook is optional. * @detach_chip: free all resources allocated/claimed in * nand_controller_ops->attach_chip(). * This hook is optional. * @exec_op: controller specific method to execute NAND operations. * This method replaces chip->legacy.cmdfunc(), * chip->legacy.{read,write}_{buf,byte,word}(), * chip->legacy.dev_ready() and chip->legacy.waitfunc(). * @setup_interface: setup the data interface and timing. If chipnr is set to * %NAND_DATA_IFACE_CHECK_ONLY this means the configuration * should not be applied but only checked. * This hook is optional. */struct nand_controller_ops { int (*attach_chip)(struct nand_chip *chip); void (*detach_chip)(struct nand_chip *chip); int (*exec_op)(struct nand_chip *chip, const struct nand_operation *op, bool check_only); int (*setup_interface)(struct nand_chip *chip, int chipnr, const struct nand_interface_config *conf);};
/** * struct nand_controller - Structure used to describe a NAND controller * * @lock: lock used to serialize accesses to the NAND controller * @ops: NAND controller operations. * @supported_op: NAND controller known-to-be-supported operations, * only writable by the core after initial checking. * @supported_op.data_only_read: The controller supports reading more data from * the bus without restarting an entire read operation nor * changing the column. * @supported_op.cont_read: The controller supports sequential cache reads. * @controller_wp: the controller is in charge of handling the WP pin. */struct nand_controller { struct mutex lock; const struct nand_controller_ops *ops; struct { unsigned int data_only_read: 1; unsigned int cont_read: 1; } supported_op; bool controller_wp;};
static inline void nand_controller_init(struct nand_controller *nfc){ mutex_init(&nfc->lock);}
/** * struct nand_legacy - NAND chip legacy fields/hooks * @IO_ADDR_R: address to read the 8 I/O lines of the flash device * @IO_ADDR_W: address to write the 8 I/O lines of the flash device * @select_chip: select/deselect a specific target/die * @read_byte: read one byte from the chip * @write_byte: write a single byte to the chip on the low 8 I/O lines * @write_buf: write data from the buffer to the chip * @read_buf: read data from the chip into the buffer * @cmd_ctrl: hardware specific function for controlling ALE/CLE/nCE. Also used * to write command and address * @cmdfunc: hardware specific function for writing commands to the chip. * @dev_ready: hardware specific function for accessing device ready/busy line. * If set to NULL no access to ready/busy is available and the * ready/busy information is read from the chip status register. * @waitfunc: hardware specific function for wait on ready. * @block_bad: check if a block is bad, using OOB markers * @block_markbad: mark a block bad * @set_features: set the NAND chip features * @get_features: get the NAND chip features * @chip_delay: chip dependent delay for transferring data from array to read * regs (tR). * @dummy_controller: dummy controller implementation for drivers that can * only control a single chip * * If you look at this structure you're already wrong. These fields/hooks are * all deprecated. */struct nand_legacy { void __iomem *IO_ADDR_R; void __iomem *IO_ADDR_W; void (*select_chip)(struct nand_chip *chip, int cs); u8 (*read_byte)(struct nand_chip *chip); void (*write_byte)(struct nand_chip *chip, u8 byte); void (*write_buf)(struct nand_chip *chip, const u8 *buf, int len); void (*read_buf)(struct nand_chip *chip, u8 *buf, int len); void (*cmd_ctrl)(struct nand_chip *chip, int dat, unsigned int ctrl); void (*cmdfunc)(struct nand_chip *chip, unsigned command, int column, int page_addr); int (*dev_ready)(struct nand_chip *chip); int (*waitfunc)(struct nand_chip *chip); int (*block_bad)(struct nand_chip *chip, loff_t ofs); int (*block_markbad)(struct nand_chip *chip, loff_t ofs); int (*set_features)(struct nand_chip *chip, int feature_addr, u8 *subfeature_para); int (*get_features)(struct nand_chip *chip, int feature_addr, u8 *subfeature_para); int chip_delay; struct nand_controller dummy_controller;};
/** * struct nand_chip_ops - NAND chip operations * @suspend: Suspend operation * @resume: Resume operation * @lock_area: Lock operation * @unlock_area: Unlock operation * @setup_read_retry: Set the read-retry mode (mostly needed for MLC NANDs) * @choose_interface_config: Choose the best interface configuration */struct nand_chip_ops { int (*suspend)(struct nand_chip *chip); void (*resume)(struct nand_chip *chip); int (*lock_area)(struct nand_chip *chip, loff_t ofs, uint64_t len); int (*unlock_area)(struct nand_chip *chip, loff_t ofs, uint64_t len); int (*setup_read_retry)(struct nand_chip *chip, int retry_mode); int (*choose_interface_config)(struct nand_chip *chip, struct nand_interface_config *iface);};
/** * struct nand_manufacturer - NAND manufacturer structure * @desc: The manufacturer description * @priv: Private information for the manufacturer driver */struct nand_manufacturer { const struct nand_manufacturer_desc *desc; void *priv;};
/** * struct nand_secure_region - NAND secure region structure * @offset: Offset of the start of the secure region * @size: Size of the secure region */struct nand_secure_region { u64 offset; u64 size;};
/** * struct nand_chip - NAND Private Flash Chip Data * @base: Inherit from the generic NAND device * @id: Holds NAND ID * @parameters: Holds generic parameters under an easily readable form * @manufacturer: Manufacturer information * @ops: NAND chip operations * @legacy: All legacy fields/hooks. If you develop a new driver, don't even try * to use any of these fields/hooks, and if you're modifying an * existing driver that is using those fields/hooks, you should * consider reworking the driver and avoid using them. * @options: Various chip options. They can partly be set to inform nand_scan * about special functionality. See the defines for further * explanation. * @current_interface_config: The currently used NAND interface configuration * @best_interface_config: The best NAND interface configuration which fits both * the NAND chip and NAND controller constraints. If * unset, the default reset interface configuration must * be used. * @bbt_erase_shift: Number of address bits in a bbt entry * @bbt_options: Bad block table specific options. All options used here must * come from bbm.h. By default, these options will be copied to * the appropriate nand_bbt_descr's. * @badblockpos: Bad block marker position in the oob area * @badblockbits: Minimum number of set bits in a good block's bad block marker * position; i.e., BBM = 11110111b is good when badblockbits = 7 * @bbt_td: Bad block table descriptor for flash lookup * @bbt_md: Bad block table mirror descriptor * @badblock_pattern: Bad block scan pattern used for initial bad block scan * @bbt: Bad block table pointer * @page_shift: Number of address bits in a page (column address bits) * @phys_erase_shift: Number of address bits in a physical eraseblock * @chip_shift: Number of address bits in one chip * @pagemask: Page number mask = number of (pages / chip) - 1 * @subpagesize: Holds the subpagesize * @data_buf: Buffer for data, size is (page size + oobsize) * @oob_poi: pointer on the OOB area covered by data_buf * @pagecache: Structure containing page cache related fields * @pagecache.bitflips: Number of bitflips of the cached page * @pagecache.page: Page number currently in the cache. -1 means no page is * currently cached * @buf_align: Minimum buffer alignment required by a platform * @lock: Lock protecting the suspended field. Also used to serialize accesses * to the NAND device * @suspended: Set to 1 when the device is suspended, 0 when it's not * @resume_wq: wait queue to sleep if rawnand is in suspended state. * @cur_cs: Currently selected target. -1 means no target selected, otherwise we * should always have cur_cs >= 0 && cur_cs < nanddev_ntargets(). * NAND Controller drivers should not modify this value, but they're * allowed to read it. * @read_retries: The number of read retry modes supported * @secure_regions: Structure containing the secure regions info * @nr_secure_regions: Number of secure regions * @cont_read: Sequential page read internals * @cont_read.ongoing: Whether a continuous read is ongoing or not * @cont_read.first_page: Start of the continuous read operation * @cont_read.pause_page: End of the current sequential cache read operation * @cont_read.last_page: End of the continuous read operation * @controller: The hardware controller structure which is shared among multiple * independent devices * @ecc: The ECC controller structure * @priv: Chip private data */struct nand_chip { struct nand_device base; struct nand_id id; struct nand_parameters parameters; struct nand_manufacturer manufacturer; struct nand_chip_ops ops; struct nand_legacy legacy; unsigned int options;
/* Data interface */ const struct nand_interface_config *current_interface_config; struct nand_interface_config *best_interface_config;
/* Bad block information */ unsigned int bbt_erase_shift; unsigned int bbt_options; unsigned int badblockpos; unsigned int badblockbits; struct nand_bbt_descr *bbt_td; struct nand_bbt_descr *bbt_md; struct nand_bbt_descr *badblock_pattern; u8 *bbt;
/* Device internal layout */ unsigned int page_shift; unsigned int phys_erase_shift; unsigned int chip_shift; unsigned int pagemask; unsigned int subpagesize;
/* Buffers */ u8 *data_buf; u8 *oob_poi; struct { unsigned int bitflips; int page; } pagecache; unsigned long buf_align;
/* Internals */ struct mutex lock; unsigned int suspended : 1; wait_queue_head_t resume_wq; int cur_cs; int read_retries; struct nand_secure_region *secure_regions; u8 nr_secure_regions; struct { bool ongoing; unsigned int first_page; unsigned int pause_page; unsigned int last_page; } cont_read;
/* Externals */ struct nand_controller *controller; struct nand_ecc_ctrl ecc; void *priv;};
static inline struct nand_chip *mtd_to_nand(struct mtd_info *mtd){ return container_of(mtd, struct nand_chip, base.mtd);}
static inline struct mtd_info *nand_to_mtd(struct nand_chip *chip){ return &chip->base.mtd;}
static inline void *nand_get_controller_data(struct nand_chip *chip){ return chip->priv;}
static inline void nand_set_controller_data(struct nand_chip *chip, void *priv){ chip->priv = priv;}
static inline void nand_set_manufacturer_data(struct nand_chip *chip, void *priv){ chip->manufacturer.priv = priv;}
static inline void *nand_get_manufacturer_data(struct nand_chip *chip){ return chip->manufacturer.priv;}
static inline void nand_set_flash_node(struct nand_chip *chip, struct device_node *np){ mtd_set_of_node(nand_to_mtd(chip), np);}
static inline struct device_node *nand_get_flash_node(struct nand_chip *chip){ return mtd_get_of_node(nand_to_mtd(chip));}
/** * nand_get_interface_config - Retrieve the current interface configuration * of a NAND chip * @chip: The NAND chip */static inline const struct nand_interface_config *nand_get_interface_config(struct nand_chip *chip){ return chip->current_interface_config;}
/* * A helper for defining older NAND chips where the second ID byte fully * defined the chip, including the geometry (chip size, eraseblock size, page * size). All these chips have 512 bytes NAND page size. */#define LEGACY_ID_NAND(nm, devid, chipsz, erasesz, opts) \ { .name = (nm), {{ .dev_id = (devid) }}, .pagesize = 512, \ .chipsize = (chipsz), .erasesize = (erasesz), .options = (opts) }
/* * A helper for defining newer chips which report their page size and * eraseblock size via the extended ID bytes. * * The real difference between LEGACY_ID_NAND and EXTENDED_ID_NAND is that with * EXTENDED_ID_NAND, manufacturers overloaded the same device ID so that the * device ID now only represented a particular total chip size (and voltage, * buswidth), and the page size, eraseblock size, and OOB size could vary while * using the same device ID. */#define EXTENDED_ID_NAND(nm, devid, chipsz, opts) \ { .name = (nm), {{ .dev_id = (devid) }}, .chipsize = (chipsz), \ .options = (opts) }
#define NAND_ECC_INFO(_strength, _step) \ { .strength_ds = (_strength), .step_ds = (_step) }#define NAND_ECC_STRENGTH(type) ((type)->ecc.strength_ds)#define NAND_ECC_STEP(type) ((type)->ecc.step_ds)
/** * struct nand_flash_dev - NAND Flash Device ID Structure * @name: a human-readable name of the NAND chip * @dev_id: the device ID (the second byte of the full chip ID array) * @mfr_id: manufacturer ID part of the full chip ID array (refers the same * memory address as ``id[0]``) * @dev_id: device ID part of the full chip ID array (refers the same memory * address as ``id[1]``) * @id: full device ID array * @pagesize: size of the NAND page in bytes; if 0, then the real page size (as * well as the eraseblock size) is determined from the extended NAND * chip ID array) * @chipsize: total chip size in MiB * @erasesize: eraseblock size in bytes (determined from the extended ID if 0) * @options: stores various chip bit options * @id_len: The valid length of the @id. * @oobsize: OOB size * @ecc: ECC correctability and step information from the datasheet. * @ecc.strength_ds: The ECC correctability from the datasheet, same as the * @ecc_strength_ds in nand_chip{}. * @ecc.step_ds: The ECC step required by the @ecc.strength_ds, same as the * @ecc_step_ds in nand_chip{}, also from the datasheet. * For example, the "4bit ECC for each 512Byte" can be set with * NAND_ECC_INFO(4, 512). */struct nand_flash_dev { char *name; union { struct { uint8_t mfr_id; uint8_t dev_id; }; uint8_t id[NAND_MAX_ID_LEN]; }; unsigned int pagesize; unsigned int chipsize; unsigned int erasesize; unsigned int options; uint16_t id_len; uint16_t oobsize; struct { uint16_t strength_ds; uint16_t step_ds; } ecc;};
int nand_create_bbt(struct nand_chip *chip);
/* * Check if it is a SLC nand. * The !nand_is_slc() can be used to check the MLC/TLC nand chips. * We do not distinguish the MLC and TLC now. */static inline bool nand_is_slc(struct nand_chip *chip){ WARN(nanddev_bits_per_cell(&chip->base) == 0, "chip->bits_per_cell is used uninitialized\n"); return nanddev_bits_per_cell(&chip->base) == 1;}
/** * nand_opcode_8bits - Check if the opcode's address should be sent only on the * lower 8 bits * @command: opcode to check */static inline int nand_opcode_8bits(unsigned int command){ switch (command) { case NAND_CMD_READID: case NAND_CMD_PARAM: case NAND_CMD_GET_FEATURES: case NAND_CMD_SET_FEATURES: return 1; default: break; } return 0;}
int rawnand_sw_hamming_init(struct nand_chip *chip);int rawnand_sw_hamming_calculate(struct nand_chip *chip, const unsigned char *buf, unsigned char *code);int rawnand_sw_hamming_correct(struct nand_chip *chip, unsigned char *buf, unsigned char *read_ecc, unsigned char *calc_ecc);void rawnand_sw_hamming_cleanup(struct nand_chip *chip);int rawnand_sw_bch_init(struct nand_chip *chip);int rawnand_sw_bch_correct(struct nand_chip *chip, unsigned char *buf, unsigned char *read_ecc, unsigned char *calc_ecc);void rawnand_sw_bch_cleanup(struct nand_chip *chip);
int nand_ecc_choose_conf(struct nand_chip *chip, const struct nand_ecc_caps *caps, int oobavail);
/* Default write_oob implementation */int nand_write_oob_std(struct nand_chip *chip, int page);
/* Default read_oob implementation */int nand_read_oob_std(struct nand_chip *chip, int page);
/* Stub used by drivers that do not support GET/SET FEATURES operations */int nand_get_set_features_notsupp(struct nand_chip *chip, int addr, u8 *subfeature_param);
/* read_page_raw implementations */int nand_read_page_raw(struct nand_chip *chip, uint8_t *buf, int oob_required, int page);int nand_monolithic_read_page_raw(struct nand_chip *chip, uint8_t *buf, int oob_required, int page);
/* write_page_raw implementations */int nand_write_page_raw(struct nand_chip *chip, const uint8_t *buf, int oob_required, int page);int nand_monolithic_write_page_raw(struct nand_chip *chip, const uint8_t *buf, int oob_required, int page);
/* Reset and initialize a NAND device */int nand_reset(struct nand_chip *chip, int chipnr);
/* NAND operation helpers */int nand_reset_op(struct nand_chip *chip);int nand_readid_op(struct nand_chip *chip, u8 addr, void *buf, unsigned int len);int nand_status_op(struct nand_chip *chip, u8 *status);int nand_exit_status_op(struct nand_chip *chip);int nand_erase_op(struct nand_chip *chip, unsigned int eraseblock);int nand_read_page_op(struct nand_chip *chip, unsigned int page, unsigned int offset_in_page, void *buf, unsigned int len);int nand_change_read_column_op(struct nand_chip *chip, unsigned int offset_in_page, void *buf, unsigned int len, bool force_8bit);int nand_read_oob_op(struct nand_chip *chip, unsigned int page, unsigned int offset_in_page, void *buf, unsigned int len);int nand_prog_page_begin_op(struct nand_chip *chip, unsigned int page, unsigned int offset_in_page, const void *buf, unsigned int len);int nand_prog_page_end_op(struct nand_chip *chip);int nand_prog_page_op(struct nand_chip *chip, unsigned int page, unsigned int offset_in_page, const void *buf, unsigned int len);int nand_change_write_column_op(struct nand_chip *chip, unsigned int offset_in_page, const void *buf, unsigned int len, bool force_8bit);int nand_read_data_op(struct nand_chip *chip, void *buf, unsigned int len, bool force_8bit, bool check_only);int nand_write_data_op(struct nand_chip *chip, const void *buf, unsigned int len, bool force_8bit);int nand_read_page_hwecc_oob_first(struct nand_chip *chip, uint8_t *buf, int oob_required, int page);
/* Scan and identify a NAND device */int nand_scan_with_ids(struct nand_chip *chip, unsigned int max_chips, struct nand_flash_dev *ids);
static inline int nand_scan(struct nand_chip *chip, unsigned int max_chips){ return nand_scan_with_ids(chip, max_chips, NULL);}
/* Internal helper for board drivers which need to override command function */void nand_wait_ready(struct nand_chip *chip);
/* * Free resources held by the NAND device, must be called on error after a * successful nand_scan(). */void nand_cleanup(struct nand_chip *chip);
/* * External helper for controller drivers that have to implement the WAITRDY * instruction and have no physical pin to check it. */int nand_soft_waitrdy(struct nand_chip *chip, unsigned long timeout_ms);int nand_gpio_waitrdy(struct nand_chip *chip, struct gpio_desc *gpiod, unsigned long timeout_ms);
/* Select/deselect a NAND target. */void nand_select_target(struct nand_chip *chip, unsigned int cs);void nand_deselect_target(struct nand_chip *chip);
/* Bitops */void nand_extract_bits(u8 *dst, unsigned int dst_off, const u8 *src, unsigned int src_off, unsigned int nbits);
/** * nand_get_data_buf() - Get the internal page buffer * @chip: NAND chip object * * Returns the pre-allocated page buffer after invalidating the cache. This * function should be used by drivers that do not want to allocate their own * bounce buffer and still need such a buffer for specific operations (most * commonly when reading OOB data only). * * Be careful to never call this function in the write/write_oob path, because * the core may have placed the data to be written out in this buffer. * * Return: pointer to the page cache buffer */static inline void *nand_get_data_buf(struct nand_chip *chip){ chip->pagecache.page = -1;
return chip->data_buf;}
/* Parse the gpio-cs property */int rawnand_dt_parse_gpio_cs(struct device *dev, struct gpio_desc ***cs_array, unsigned int *ncs_array);
#endif /* __LINUX_MTD_RAWNAND_H */