Something went wrong. Try again.
(I'm so sorry!) Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel os linux
Something went wrong. Try again.
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723/* SPDX-License-Identifier: GPL-2.0 */#ifndef LINUX_BCMA_DRIVER_CC_H_#define LINUX_BCMA_DRIVER_CC_H_
#include <linux/platform_device.h>#include <linux/platform_data/brcmnand.h>#include <linux/gpio/driver.h>
/** ChipCommon core registers. **/#define BCMA_CC_ID 0x0000#define BCMA_CC_ID_ID 0x0000FFFF#define BCMA_CC_ID_ID_SHIFT 0#define BCMA_CC_ID_REV 0x000F0000#define BCMA_CC_ID_REV_SHIFT 16#define BCMA_CC_ID_PKG 0x00F00000#define BCMA_CC_ID_PKG_SHIFT 20#define BCMA_CC_ID_NRCORES 0x0F000000#define BCMA_CC_ID_NRCORES_SHIFT 24#define BCMA_CC_ID_TYPE 0xF0000000#define BCMA_CC_ID_TYPE_SHIFT 28#define BCMA_CC_CAP 0x0004 /* Capabilities */#define BCMA_CC_CAP_NRUART 0x00000003 /* # of UARTs */#define BCMA_CC_CAP_MIPSEB 0x00000004 /* MIPS in BigEndian Mode */#define BCMA_CC_CAP_UARTCLK 0x00000018 /* UART clock select */#define BCMA_CC_CAP_UARTCLK_INT 0x00000008 /* UARTs are driven by internal divided clock */#define BCMA_CC_CAP_UARTGPIO 0x00000020 /* UARTs on GPIO 15-12 */#define BCMA_CC_CAP_EXTBUS 0x000000C0 /* External buses present */#define BCMA_CC_CAP_FLASHT 0x00000700 /* Flash Type */#define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */#define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */#define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */#define BCMA_CC_FLASHT_NAND 0x00000300 /* NAND flash */#define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */#define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */#define BCMA_PLLTYPE_NONE 0x00000000#define BCMA_PLLTYPE_1 0x00010000 /* 48Mhz base, 3 dividers */#define BCMA_PLLTYPE_2 0x00020000 /* 48Mhz, 4 dividers */#define BCMA_PLLTYPE_3 0x00030000 /* 25Mhz, 2 dividers */#define BCMA_PLLTYPE_4 0x00008000 /* 48Mhz, 4 dividers */#define BCMA_PLLTYPE_5 0x00018000 /* 25Mhz, 4 dividers */#define BCMA_PLLTYPE_6 0x00028000 /* 100/200 or 120/240 only */#define BCMA_PLLTYPE_7 0x00038000 /* 25Mhz, 4 dividers */#define BCMA_CC_CAP_PCTL 0x00040000 /* Power Control */#define BCMA_CC_CAP_OTPS 0x00380000 /* OTP size */#define BCMA_CC_CAP_OTPS_SHIFT 19#define BCMA_CC_CAP_OTPS_BASE 5#define BCMA_CC_CAP_JTAGM 0x00400000 /* JTAG master present */#define BCMA_CC_CAP_BROM 0x00800000 /* Internal boot ROM active */#define BCMA_CC_CAP_64BIT 0x08000000 /* 64-bit Backplane */#define BCMA_CC_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */#define BCMA_CC_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */#define BCMA_CC_CAP_SPROM 0x40000000 /* SPROM present */#define BCMA_CC_CAP_NFLASH 0x80000000 /* NAND flash present (rev >= 35 or BCM4706?) */#define BCMA_CC_CORECTL 0x0008#define BCMA_CC_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */#define BCMA_CC_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */#define BCMA_CC_CORECTL_UARTCLKEN 0x00000008 /* UART clock enable (rev >= 21) */#define BCMA_CC_BIST 0x000C#define BCMA_CC_OTPS 0x0010 /* OTP status */#define BCMA_CC_OTPS_PROGFAIL 0x80000000#define BCMA_CC_OTPS_PROTECT 0x00000007#define BCMA_CC_OTPS_HW_PROTECT 0x00000001#define BCMA_CC_OTPS_SW_PROTECT 0x00000002#define BCMA_CC_OTPS_CID_PROTECT 0x00000004#define BCMA_CC_OTPS_GU_PROG_IND 0x00000F00 /* General Use programmed indication */#define BCMA_CC_OTPS_GU_PROG_IND_SHIFT 8#define BCMA_CC_OTPS_GU_PROG_HW 0x00000100 /* HW region programmed */#define BCMA_CC_OTPC 0x0014 /* OTP control */#define BCMA_CC_OTPC_RECWAIT 0xFF000000#define BCMA_CC_OTPC_PROGWAIT 0x00FFFF00#define BCMA_CC_OTPC_PRW_SHIFT 8#define BCMA_CC_OTPC_MAXFAIL 0x00000038#define BCMA_CC_OTPC_VSEL 0x00000006#define BCMA_CC_OTPC_SELVL 0x00000001#define BCMA_CC_OTPP 0x0018 /* OTP prog */#define BCMA_CC_OTPP_COL 0x000000FF#define BCMA_CC_OTPP_ROW 0x0000FF00#define BCMA_CC_OTPP_ROW_SHIFT 8#define BCMA_CC_OTPP_READERR 0x10000000#define BCMA_CC_OTPP_VALUE 0x20000000#define BCMA_CC_OTPP_READ 0x40000000#define BCMA_CC_OTPP_START 0x80000000#define BCMA_CC_OTPP_BUSY 0x80000000#define BCMA_CC_OTPL 0x001C /* OTP layout */#define BCMA_CC_OTPL_GURGN_OFFSET 0x00000FFF /* offset of general use region */#define BCMA_CC_IRQSTAT 0x0020#define BCMA_CC_IRQMASK 0x0024#define BCMA_CC_IRQ_GPIO 0x00000001 /* gpio intr */#define BCMA_CC_IRQ_EXT 0x00000002 /* ro: ext intr pin (corerev >= 3) */#define BCMA_CC_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */#define BCMA_CC_CHIPCTL 0x0028 /* Rev >= 11 only */#define BCMA_CC_CHIPSTAT 0x002C /* Rev >= 11 only */#define BCMA_CC_CHIPST_4313_SPROM_PRESENT 1#define BCMA_CC_CHIPST_4313_OTP_PRESENT 2#define BCMA_CC_CHIPST_4331_SPROM_PRESENT 2#define BCMA_CC_CHIPST_4331_OTP_PRESENT 4#define BCMA_CC_CHIPST_43228_ILP_DIV_EN 0x00000001#define BCMA_CC_CHIPST_43228_OTP_PRESENT 0x00000002#define BCMA_CC_CHIPST_43228_SERDES_REFCLK_PADSEL 0x00000004#define BCMA_CC_CHIPST_43228_SDIO_MODE 0x00000008#define BCMA_CC_CHIPST_43228_SDIO_OTP_PRESENT 0x00000010#define BCMA_CC_CHIPST_43228_SDIO_RESET 0x00000020#define BCMA_CC_CHIPST_4706_PKG_OPTION BIT(0) /* 0: full-featured package 1: low-cost package */#define BCMA_CC_CHIPST_4706_SFLASH_PRESENT BIT(1) /* 0: parallel, 1: serial flash is present */#define BCMA_CC_CHIPST_4706_SFLASH_TYPE BIT(2) /* 0: 8b-p/ST-s flash, 1: 16b-p/Atmal-s flash */#define BCMA_CC_CHIPST_4706_MIPS_BENDIAN BIT(3) /* 0: little, 1: big endian */#define BCMA_CC_CHIPST_4706_PCIE1_DISABLE BIT(5) /* PCIE1 enable strap pin */#define BCMA_CC_CHIPST_5357_NAND_BOOT BIT(4) /* NAND boot, valid for CC rev 38 and/or BCM5357 */#define BCMA_CC_CHIPST_4360_XTAL_40MZ 0x00000001#define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */#define BCMA_CC_JCMD_START 0x80000000#define BCMA_CC_JCMD_BUSY 0x80000000#define BCMA_CC_JCMD_PAUSE 0x40000000#define BCMA_CC_JCMD0_ACC_MASK 0x0000F000#define BCMA_CC_JCMD0_ACC_IRDR 0x00000000#define BCMA_CC_JCMD0_ACC_DR 0x00001000#define BCMA_CC_JCMD0_ACC_IR 0x00002000#define BCMA_CC_JCMD0_ACC_RESET 0x00003000#define BCMA_CC_JCMD0_ACC_IRPDR 0x00004000#define BCMA_CC_JCMD0_ACC_PDR 0x00005000#define BCMA_CC_JCMD0_IRW_MASK 0x00000F00#define BCMA_CC_JCMD_ACC_MASK 0x000F0000 /* Changes for corerev 11 */#define BCMA_CC_JCMD_ACC_IRDR 0x00000000#define BCMA_CC_JCMD_ACC_DR 0x00010000#define BCMA_CC_JCMD_ACC_IR 0x00020000#define BCMA_CC_JCMD_ACC_RESET 0x00030000#define BCMA_CC_JCMD_ACC_IRPDR 0x00040000#define BCMA_CC_JCMD_ACC_PDR 0x00050000#define BCMA_CC_JCMD_IRW_MASK 0x00001F00#define BCMA_CC_JCMD_IRW_SHIFT 8#define BCMA_CC_JCMD_DRW_MASK 0x0000003F#define BCMA_CC_JIR 0x0034 /* Rev >= 10 only */#define BCMA_CC_JDR 0x0038 /* Rev >= 10 only */#define BCMA_CC_JCTL 0x003C /* Rev >= 10 only */#define BCMA_CC_JCTL_FORCE_CLK 4 /* Force clock */#define BCMA_CC_JCTL_EXT_EN 2 /* Enable external targets */#define BCMA_CC_JCTL_EN 1 /* Enable Jtag master */#define BCMA_CC_FLASHCTL 0x0040/* Start/busy bit in flashcontrol */#define BCMA_CC_FLASHCTL_OPCODE 0x000000ff#define BCMA_CC_FLASHCTL_ACTION 0x00000700#define BCMA_CC_FLASHCTL_CS_ACTIVE 0x00001000 /* Chip Select Active, rev >= 20 */#define BCMA_CC_FLASHCTL_START 0x80000000#define BCMA_CC_FLASHCTL_BUSY BCMA_CC_FLASHCTL_START/* Flashcontrol action + opcodes for ST flashes */#define BCMA_CC_FLASHCTL_ST_WREN 0x0006 /* Write Enable */#define BCMA_CC_FLASHCTL_ST_WRDIS 0x0004 /* Write Disable */#define BCMA_CC_FLASHCTL_ST_RDSR 0x0105 /* Read Status Register */#define BCMA_CC_FLASHCTL_ST_WRSR 0x0101 /* Write Status Register */#define BCMA_CC_FLASHCTL_ST_READ 0x0303 /* Read Data Bytes */#define BCMA_CC_FLASHCTL_ST_PP 0x0302 /* Page Program */#define BCMA_CC_FLASHCTL_ST_SE 0x02d8 /* Sector Erase */#define BCMA_CC_FLASHCTL_ST_BE 0x00c7 /* Bulk Erase */#define BCMA_CC_FLASHCTL_ST_DP 0x00b9 /* Deep Power-down */#define BCMA_CC_FLASHCTL_ST_RES 0x03ab /* Read Electronic Signature */#define BCMA_CC_FLASHCTL_ST_CSA 0x1000 /* Keep chip select asserted */#define BCMA_CC_FLASHCTL_ST_SSE 0x0220 /* Sub-sector Erase *//* Flashcontrol action + opcodes for Atmel flashes */#define BCMA_CC_FLASHCTL_AT_READ 0x07e8#define BCMA_CC_FLASHCTL_AT_PAGE_READ 0x07d2#define BCMA_CC_FLASHCTL_AT_STATUS 0x01d7#define BCMA_CC_FLASHCTL_AT_BUF1_WRITE 0x0384#define BCMA_CC_FLASHCTL_AT_BUF2_WRITE 0x0387#define BCMA_CC_FLASHCTL_AT_BUF1_ERASE_PROGRAM 0x0283#define BCMA_CC_FLASHCTL_AT_BUF2_ERASE_PROGRAM 0x0286#define BCMA_CC_FLASHCTL_AT_BUF1_PROGRAM 0x0288#define BCMA_CC_FLASHCTL_AT_BUF2_PROGRAM 0x0289#define BCMA_CC_FLASHCTL_AT_PAGE_ERASE 0x0281#define BCMA_CC_FLASHCTL_AT_BLOCK_ERASE 0x0250#define BCMA_CC_FLASHCTL_AT_BUF1_WRITE_ERASE_PROGRAM 0x0382#define BCMA_CC_FLASHCTL_AT_BUF2_WRITE_ERASE_PROGRAM 0x0385#define BCMA_CC_FLASHCTL_AT_BUF1_LOAD 0x0253#define BCMA_CC_FLASHCTL_AT_BUF2_LOAD 0x0255#define BCMA_CC_FLASHCTL_AT_BUF1_COMPARE 0x0260#define BCMA_CC_FLASHCTL_AT_BUF2_COMPARE 0x0261#define BCMA_CC_FLASHCTL_AT_BUF1_REPROGRAM 0x0258#define BCMA_CC_FLASHCTL_AT_BUF2_REPROGRAM 0x0259#define BCMA_CC_FLASHADDR 0x0044#define BCMA_CC_FLASHDATA 0x0048/* Status register bits for ST flashes */#define BCMA_CC_FLASHDATA_ST_WIP 0x01 /* Write In Progress */#define BCMA_CC_FLASHDATA_ST_WEL 0x02 /* Write Enable Latch */#define BCMA_CC_FLASHDATA_ST_BP_MASK 0x1c /* Block Protect */#define BCMA_CC_FLASHDATA_ST_BP_SHIFT 2#define BCMA_CC_FLASHDATA_ST_SRWD 0x80 /* Status Register Write Disable *//* Status register bits for Atmel flashes */#define BCMA_CC_FLASHDATA_AT_READY 0x80#define BCMA_CC_FLASHDATA_AT_MISMATCH 0x40#define BCMA_CC_FLASHDATA_AT_ID_MASK 0x38#define BCMA_CC_FLASHDATA_AT_ID_SHIFT 3#define BCMA_CC_BCAST_ADDR 0x0050#define BCMA_CC_BCAST_DATA 0x0054#define BCMA_CC_GPIOPULLUP 0x0058 /* Rev >= 20 only */#define BCMA_CC_GPIOPULLDOWN 0x005C /* Rev >= 20 only */#define BCMA_CC_GPIOIN 0x0060#define BCMA_CC_GPIOOUT 0x0064#define BCMA_CC_GPIOOUTEN 0x0068#define BCMA_CC_GPIOCTL 0x006C#define BCMA_CC_GPIOPOL 0x0070#define BCMA_CC_GPIOIRQ 0x0074#define BCMA_CC_WATCHDOG 0x0080#define BCMA_CC_GPIOTIMER 0x0088 /* LED powersave (corerev >= 16) */#define BCMA_CC_GPIOTIMER_OFFTIME 0x0000FFFF#define BCMA_CC_GPIOTIMER_OFFTIME_SHIFT 0#define BCMA_CC_GPIOTIMER_ONTIME 0xFFFF0000#define BCMA_CC_GPIOTIMER_ONTIME_SHIFT 16#define BCMA_CC_GPIOTOUTM 0x008C /* LED powersave (corerev >= 16) */#define BCMA_CC_CLOCK_N 0x0090#define BCMA_CC_CLOCK_SB 0x0094#define BCMA_CC_CLOCK_PCI 0x0098#define BCMA_CC_CLOCK_M2 0x009C#define BCMA_CC_CLOCK_MIPS 0x00A0#define BCMA_CC_CLKDIV 0x00A4 /* Rev >= 3 only */#define BCMA_CC_CLKDIV_SFLASH 0x0F000000#define BCMA_CC_CLKDIV_SFLASH_SHIFT 24#define BCMA_CC_CLKDIV_OTP 0x000F0000#define BCMA_CC_CLKDIV_OTP_SHIFT 16#define BCMA_CC_CLKDIV_JTAG 0x00000F00#define BCMA_CC_CLKDIV_JTAG_SHIFT 8#define BCMA_CC_CLKDIV_UART 0x000000FF#define BCMA_CC_CAP_EXT 0x00AC /* Capabilities */#define BCMA_CC_CAP_EXT_SECI_PRESENT 0x00000001#define BCMA_CC_CAP_EXT_GSIO_PRESENT 0x00000002#define BCMA_CC_CAP_EXT_GCI_PRESENT 0x00000004#define BCMA_CC_CAP_EXT_SECI_PUART_PRESENT 0x00000008 /* UART present */#define BCMA_CC_CAP_EXT_AOB_PRESENT 0x00000040#define BCMA_CC_PLLONDELAY 0x00B0 /* Rev >= 4 only */#define BCMA_CC_FREFSELDELAY 0x00B4 /* Rev >= 4 only */#define BCMA_CC_SLOWCLKCTL 0x00B8 /* 6 <= Rev <= 9 only */#define BCMA_CC_SLOWCLKCTL_SRC 0x00000007 /* slow clock source mask */#define BCMA_CC_SLOWCLKCTL_SRC_LPO 0x00000000 /* source of slow clock is LPO */#define BCMA_CC_SLOWCLKCTL_SRC_XTAL 0x00000001 /* source of slow clock is crystal */#define BCMA_CC_SLOECLKCTL_SRC_PCI 0x00000002 /* source of slow clock is PCI */#define BCMA_CC_SLOWCLKCTL_LPOFREQ 0x00000200 /* LPOFreqSel, 1: 160Khz, 0: 32KHz */#define BCMA_CC_SLOWCLKCTL_LPOPD 0x00000400 /* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */#define BCMA_CC_SLOWCLKCTL_FSLOW 0x00000800 /* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */#define BCMA_CC_SLOWCLKCTL_IPLL 0x00001000 /* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */#define BCMA_CC_SLOWCLKCTL_ENXTAL 0x00002000 /* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */#define BCMA_CC_SLOWCLKCTL_XTALPU 0x00004000 /* XtalPU (RO), 1/0: crystal running/disabled */#define BCMA_CC_SLOWCLKCTL_CLKDIV 0xFFFF0000 /* ClockDivider (SlowClk = 1/(4+divisor)) */#define BCMA_CC_SLOWCLKCTL_CLKDIV_SHIFT 16#define BCMA_CC_SYSCLKCTL 0x00C0 /* Rev >= 3 only */#define BCMA_CC_SYSCLKCTL_IDLPEN 0x00000001 /* ILPen: Enable Idle Low Power */#define BCMA_CC_SYSCLKCTL_ALPEN 0x00000002 /* ALPen: Enable Active Low Power */#define BCMA_CC_SYSCLKCTL_PLLEN 0x00000004 /* ForcePLLOn */#define BCMA_CC_SYSCLKCTL_FORCEALP 0x00000008 /* Force ALP (or HT if ALPen is not set */#define BCMA_CC_SYSCLKCTL_FORCEHT 0x00000010 /* Force HT */#define BCMA_CC_SYSCLKCTL_CLKDIV 0xFFFF0000 /* ClkDiv (ILP = 1/(4+divisor)) */#define BCMA_CC_SYSCLKCTL_CLKDIV_SHIFT 16#define BCMA_CC_CLKSTSTR 0x00C4 /* Rev >= 3 only */#define BCMA_CC_EROM 0x00FC#define BCMA_CC_PCMCIA_CFG 0x0100#define BCMA_CC_PCMCIA_MEMWAIT 0x0104#define BCMA_CC_PCMCIA_ATTRWAIT 0x0108#define BCMA_CC_PCMCIA_IOWAIT 0x010C#define BCMA_CC_IDE_CFG 0x0110#define BCMA_CC_IDE_MEMWAIT 0x0114#define BCMA_CC_IDE_ATTRWAIT 0x0118#define BCMA_CC_IDE_IOWAIT 0x011C#define BCMA_CC_PROG_CFG 0x0120#define BCMA_CC_PROG_WAITCNT 0x0124#define BCMA_CC_FLASH_CFG 0x0128#define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */#define BCMA_CC_FLASH_WAITCNT 0x012C#define BCMA_CC_SROM_CONTROL 0x0190#define BCMA_CC_SROM_CONTROL_START 0x80000000#define BCMA_CC_SROM_CONTROL_BUSY 0x80000000#define BCMA_CC_SROM_CONTROL_OPCODE 0x60000000#define BCMA_CC_SROM_CONTROL_OP_READ 0x00000000#define BCMA_CC_SROM_CONTROL_OP_WRITE 0x20000000#define BCMA_CC_SROM_CONTROL_OP_WRDIS 0x40000000#define BCMA_CC_SROM_CONTROL_OP_WREN 0x60000000#define BCMA_CC_SROM_CONTROL_OTPSEL 0x00000010#define BCMA_CC_SROM_CONTROL_OTP_PRESENT 0x00000020#define BCMA_CC_SROM_CONTROL_LOCK 0x00000008#define BCMA_CC_SROM_CONTROL_SIZE_MASK 0x00000006#define BCMA_CC_SROM_CONTROL_SIZE_1K 0x00000000#define BCMA_CC_SROM_CONTROL_SIZE_4K 0x00000002#define BCMA_CC_SROM_CONTROL_SIZE_16K 0x00000004#define BCMA_CC_SROM_CONTROL_SIZE_SHIFT 1#define BCMA_CC_SROM_CONTROL_PRESENT 0x00000001/* Block 0x140 - 0x190 registers are chipset specific */#define BCMA_CC_4706_FLASHSCFG 0x18C /* Flash struct configuration */#define BCMA_CC_4706_FLASHSCFG_MASK 0x000000ff#define BCMA_CC_4706_FLASHSCFG_SF1 0x00000001 /* 2nd serial flash present */#define BCMA_CC_4706_FLASHSCFG_PF1 0x00000002 /* 2nd parallel flash present */#define BCMA_CC_4706_FLASHSCFG_SF1_TYPE 0x00000004 /* 2nd serial flash type : 0 : ST, 1 : Atmel */#define BCMA_CC_4706_FLASHSCFG_NF1 0x00000008 /* 2nd NAND flash present */#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_MASK 0x000000f0#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_4MB 0x00000010 /* 4MB */#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_8MB 0x00000020 /* 8MB */#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_16MB 0x00000030 /* 16MB */#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_32MB 0x00000040 /* 32MB */#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_64MB 0x00000050 /* 64MB */#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_128MB 0x00000060 /* 128MB */#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_256MB 0x00000070 /* 256MB *//* NAND flash registers for BCM4706 (corerev = 31) */#define BCMA_CC_NFLASH_CTL 0x01A0#define BCMA_CC_NFLASH_CTL_ERR 0x08000000#define BCMA_CC_NFLASH_CONF 0x01A4#define BCMA_CC_NFLASH_COL_ADDR 0x01A8#define BCMA_CC_NFLASH_ROW_ADDR 0x01AC#define BCMA_CC_NFLASH_DATA 0x01B0#define BCMA_CC_NFLASH_WAITCNT0 0x01B4/* 0x1E0 is defined as shared BCMA_CLKCTLST */#define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */#define BCMA_CC_UART0_DATA 0x0300#define BCMA_CC_UART0_IMR 0x0304#define BCMA_CC_UART0_FCR 0x0308#define BCMA_CC_UART0_LCR 0x030C#define BCMA_CC_UART0_MCR 0x0310#define BCMA_CC_UART0_LSR 0x0314#define BCMA_CC_UART0_MSR 0x0318#define BCMA_CC_UART0_SCRATCH 0x031C#define BCMA_CC_UART1_DATA 0x0400#define BCMA_CC_UART1_IMR 0x0404#define BCMA_CC_UART1_FCR 0x0408#define BCMA_CC_UART1_LCR 0x040C#define BCMA_CC_UART1_MCR 0x0410#define BCMA_CC_UART1_LSR 0x0414#define BCMA_CC_UART1_MSR 0x0418#define BCMA_CC_UART1_SCRATCH 0x041C/* PMU registers (rev >= 20) */#define BCMA_CC_PMU_CTL 0x0600 /* PMU control */#define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */#define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16#define BCMA_CC_PMU_CTL_RES 0x00006000 /* reset control mask */#define BCMA_CC_PMU_CTL_RES_SHIFT 13#define BCMA_CC_PMU_CTL_RES_RELOAD 0x2 /* reload POR values */#define BCMA_CC_PMU_CTL_PLL_UPD 0x00000400#define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */#define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */#define BCMA_CC_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */#define BCMA_CC_PMU_CTL_XTALFREQ 0x0000007C /* Crystal freq */#define BCMA_CC_PMU_CTL_XTALFREQ_SHIFT 2#define BCMA_CC_PMU_CTL_ILPDIVEN 0x00000002 /* ILP div enable */#define BCMA_CC_PMU_CTL_LPOSEL 0x00000001 /* LPO sel */#define BCMA_CC_PMU_CAP 0x0604 /* PMU capabilities */#define BCMA_CC_PMU_CAP_REVISION 0x000000FF /* Revision mask */#define BCMA_CC_PMU_STAT 0x0608 /* PMU status */#define BCMA_CC_PMU_STAT_EXT_LPO_AVAIL 0x00000100#define BCMA_CC_PMU_STAT_WDRESET 0x00000080#define BCMA_CC_PMU_STAT_INTPEND 0x00000040 /* Interrupt pending */#define BCMA_CC_PMU_STAT_SBCLKST 0x00000030 /* Backplane clock status? */#define BCMA_CC_PMU_STAT_HAVEALP 0x00000008 /* ALP available */#define BCMA_CC_PMU_STAT_HAVEHT 0x00000004 /* HT available */#define BCMA_CC_PMU_STAT_RESINIT 0x00000003 /* Res init */#define BCMA_CC_PMU_RES_STAT 0x060C /* PMU res status */#define BCMA_CC_PMU_RES_PEND 0x0610 /* PMU res pending */#define BCMA_CC_PMU_TIMER 0x0614 /* PMU timer */#define BCMA_CC_PMU_MINRES_MSK 0x0618 /* PMU min res mask */#define BCMA_CC_PMU_MAXRES_MSK 0x061C /* PMU max res mask */#define BCMA_CC_PMU_RES_TABSEL 0x0620 /* PMU res table sel */#define BCMA_CC_PMU_RES_DEPMSK 0x0624 /* PMU res dep mask */#define BCMA_CC_PMU_RES_UPDNTM 0x0628 /* PMU res updown timer */#define BCMA_CC_PMU_RES_TIMER 0x062C /* PMU res timer */#define BCMA_CC_PMU_CLKSTRETCH 0x0630 /* PMU clockstretch */#define BCMA_CC_PMU_WATCHDOG 0x0634 /* PMU watchdog */#define BCMA_CC_PMU_RES_REQTS 0x0640 /* PMU res req timer sel */#define BCMA_CC_PMU_RES_REQT 0x0644 /* PMU res req timer */#define BCMA_CC_PMU_RES_REQM 0x0648 /* PMU res req mask */#define BCMA_CC_PMU_CHIPCTL_ADDR 0x0650#define BCMA_CC_PMU_CHIPCTL_DATA 0x0654#define BCMA_CC_PMU_REGCTL_ADDR 0x0658#define BCMA_CC_PMU_REGCTL_DATA 0x065C#define BCMA_CC_PMU_PLLCTL_ADDR 0x0660#define BCMA_CC_PMU_PLLCTL_DATA 0x0664#define BCMA_CC_PMU_STRAPOPT 0x0668 /* (corerev >= 28) */#define BCMA_CC_PMU_XTAL_FREQ 0x066C /* (pmurev >= 10) */#define BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK 0x00001FFF#define BCMA_CC_PMU_XTAL_FREQ_MEASURE_MASK 0x80000000#define BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT 31#define BCMA_CC_SPROM 0x0800 /* SPROM beginning *//* NAND flash MLC controller registers (corerev >= 38) */#define BCMA_CC_NAND_REVISION 0x0C00#define BCMA_CC_NAND_CMD_START 0x0C04#define BCMA_CC_NAND_CMD_ADDR_X 0x0C08#define BCMA_CC_NAND_CMD_ADDR 0x0C0C#define BCMA_CC_NAND_CMD_END_ADDR 0x0C10#define BCMA_CC_NAND_CS_NAND_SELECT 0x0C14#define BCMA_CC_NAND_CS_NAND_XOR 0x0C18#define BCMA_CC_NAND_SPARE_RD0 0x0C20#define BCMA_CC_NAND_SPARE_RD4 0x0C24#define BCMA_CC_NAND_SPARE_RD8 0x0C28#define BCMA_CC_NAND_SPARE_RD12 0x0C2C#define BCMA_CC_NAND_SPARE_WR0 0x0C30#define BCMA_CC_NAND_SPARE_WR4 0x0C34#define BCMA_CC_NAND_SPARE_WR8 0x0C38#define BCMA_CC_NAND_SPARE_WR12 0x0C3C#define BCMA_CC_NAND_ACC_CONTROL 0x0C40#define BCMA_CC_NAND_CONFIG 0x0C48#define BCMA_CC_NAND_TIMING_1 0x0C50#define BCMA_CC_NAND_TIMING_2 0x0C54#define BCMA_CC_NAND_SEMAPHORE 0x0C58#define BCMA_CC_NAND_DEVID 0x0C60#define BCMA_CC_NAND_DEVID_X 0x0C64#define BCMA_CC_NAND_BLOCK_LOCK_STATUS 0x0C68#define BCMA_CC_NAND_INTFC_STATUS 0x0C6C#define BCMA_CC_NAND_ECC_CORR_ADDR_X 0x0C70#define BCMA_CC_NAND_ECC_CORR_ADDR 0x0C74#define BCMA_CC_NAND_ECC_UNC_ADDR_X 0x0C78#define BCMA_CC_NAND_ECC_UNC_ADDR 0x0C7C#define BCMA_CC_NAND_READ_ERROR_COUNT 0x0C80#define BCMA_CC_NAND_CORR_STAT_THRESHOLD 0x0C84#define BCMA_CC_NAND_READ_ADDR_X 0x0C90#define BCMA_CC_NAND_READ_ADDR 0x0C94#define BCMA_CC_NAND_PAGE_PROGRAM_ADDR_X 0x0C98#define BCMA_CC_NAND_PAGE_PROGRAM_ADDR 0x0C9C#define BCMA_CC_NAND_COPY_BACK_ADDR_X 0x0CA0#define BCMA_CC_NAND_COPY_BACK_ADDR 0x0CA4#define BCMA_CC_NAND_BLOCK_ERASE_ADDR_X 0x0CA8#define BCMA_CC_NAND_BLOCK_ERASE_ADDR 0x0CAC#define BCMA_CC_NAND_INV_READ_ADDR_X 0x0CB0#define BCMA_CC_NAND_INV_READ_ADDR 0x0CB4#define BCMA_CC_NAND_BLK_WR_PROTECT 0x0CC0#define BCMA_CC_NAND_ACC_CONTROL_CS1 0x0CD0#define BCMA_CC_NAND_CONFIG_CS1 0x0CD4#define BCMA_CC_NAND_TIMING_1_CS1 0x0CD8#define BCMA_CC_NAND_TIMING_2_CS1 0x0CDC#define BCMA_CC_NAND_SPARE_RD16 0x0D30#define BCMA_CC_NAND_SPARE_RD20 0x0D34#define BCMA_CC_NAND_SPARE_RD24 0x0D38#define BCMA_CC_NAND_SPARE_RD28 0x0D3C#define BCMA_CC_NAND_CACHE_ADDR 0x0D40#define BCMA_CC_NAND_CACHE_DATA 0x0D44#define BCMA_CC_NAND_CTRL_CONFIG 0x0D48#define BCMA_CC_NAND_CTRL_STATUS 0x0D4C
/* Divider allocation in 4716/47162/5356 */#define BCMA_CC_PMU5_MAINPLL_CPU 1#define BCMA_CC_PMU5_MAINPLL_MEM 2#define BCMA_CC_PMU5_MAINPLL_SSB 3
/* PLL usage in 4716/47162 */#define BCMA_CC_PMU4716_MAINPLL_PLL0 12
/* PLL usage in 5356/5357 */#define BCMA_CC_PMU5356_MAINPLL_PLL0 0#define BCMA_CC_PMU5357_MAINPLL_PLL0 0
/* 4706 PMU */#define BCMA_CC_PMU4706_MAINPLL_PLL0 0#define BCMA_CC_PMU6_4706_PROCPLL_OFF 4 /* The CPU PLL */#define BCMA_CC_PMU6_4706_PROC_P2DIV_MASK 0x000f0000#define BCMA_CC_PMU6_4706_PROC_P2DIV_SHIFT 16#define BCMA_CC_PMU6_4706_PROC_P1DIV_MASK 0x0000f000#define BCMA_CC_PMU6_4706_PROC_P1DIV_SHIFT 12#define BCMA_CC_PMU6_4706_PROC_NDIV_INT_MASK 0x00000ff8#define BCMA_CC_PMU6_4706_PROC_NDIV_INT_SHIFT 3#define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_MASK 0x00000007#define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_SHIFT 0
/* PMU rev 15 */#define BCMA_CC_PMU15_PLL_PLLCTL0 0#define BCMA_CC_PMU15_PLL_PC0_CLKSEL_MASK 0x00000003#define BCMA_CC_PMU15_PLL_PC0_CLKSEL_SHIFT 0#define BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK 0x003FFFFC#define BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT 2#define BCMA_CC_PMU15_PLL_PC0_PRESCALE_MASK 0x00C00000#define BCMA_CC_PMU15_PLL_PC0_PRESCALE_SHIFT 22#define BCMA_CC_PMU15_PLL_PC0_KPCTRL_MASK 0x07000000#define BCMA_CC_PMU15_PLL_PC0_KPCTRL_SHIFT 24#define BCMA_CC_PMU15_PLL_PC0_FCNTCTRL_MASK 0x38000000#define BCMA_CC_PMU15_PLL_PC0_FCNTCTRL_SHIFT 27#define BCMA_CC_PMU15_PLL_PC0_FDCMODE_MASK 0x40000000#define BCMA_CC_PMU15_PLL_PC0_FDCMODE_SHIFT 30#define BCMA_CC_PMU15_PLL_PC0_CTRLBIAS_MASK 0x80000000#define BCMA_CC_PMU15_PLL_PC0_CTRLBIAS_SHIFT 31
/* ALP clock on pre-PMU chips */#define BCMA_CC_PMU_ALP_CLOCK 20000000/* HT clock for systems with PMU-enabled chipcommon */#define BCMA_CC_PMU_HT_CLOCK 80000000
/* PMU rev 5 (& 6) */#define BCMA_CC_PPL_P1P2_OFF 0#define BCMA_CC_PPL_P1_MASK 0x0f000000#define BCMA_CC_PPL_P1_SHIFT 24#define BCMA_CC_PPL_P2_MASK 0x00f00000#define BCMA_CC_PPL_P2_SHIFT 20#define BCMA_CC_PPL_M14_OFF 1#define BCMA_CC_PPL_MDIV_MASK 0x000000ff#define BCMA_CC_PPL_MDIV_WIDTH 8#define BCMA_CC_PPL_NM5_OFF 2#define BCMA_CC_PPL_NDIV_MASK 0xfff00000#define BCMA_CC_PPL_NDIV_SHIFT 20#define BCMA_CC_PPL_FMAB_OFF 3#define BCMA_CC_PPL_MRAT_MASK 0xf0000000#define BCMA_CC_PPL_MRAT_SHIFT 28#define BCMA_CC_PPL_ABRAT_MASK 0x08000000#define BCMA_CC_PPL_ABRAT_SHIFT 27#define BCMA_CC_PPL_FDIV_MASK 0x07ffffff#define BCMA_CC_PPL_PLLCTL_OFF 4#define BCMA_CC_PPL_PCHI_OFF 5#define BCMA_CC_PPL_PCHI_MASK 0x0000003f
#define BCMA_CC_PMU_PLL_CTL0 0#define BCMA_CC_PMU_PLL_CTL1 1#define BCMA_CC_PMU_PLL_CTL2 2#define BCMA_CC_PMU_PLL_CTL3 3#define BCMA_CC_PMU_PLL_CTL4 4#define BCMA_CC_PMU_PLL_CTL5 5
#define BCMA_CC_PMU1_PLL0_PC0_P1DIV_MASK 0x00f00000#define BCMA_CC_PMU1_PLL0_PC0_P1DIV_SHIFT 20
#define BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_MASK 0x1ff00000#define BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT 20
#define BCMA_CCB_MII_MNG_CTL 0x0000#define BCMA_CCB_MII_MNG_CMD_DATA 0x0004
/* BCM4331 ChipControl numbers. */#define BCMA_CHIPCTL_4331_BT_COEXIST BIT(0) /* 0 disable */#define BCMA_CHIPCTL_4331_SECI BIT(1) /* 0 SECI is disabled (JATG functional) */#define BCMA_CHIPCTL_4331_EXT_LNA BIT(2) /* 0 disable */#define BCMA_CHIPCTL_4331_SPROM_GPIO13_15 BIT(3) /* sprom/gpio13-15 mux */#define BCMA_CHIPCTL_4331_EXTPA_EN BIT(4) /* 0 ext pa disable, 1 ext pa enabled */#define BCMA_CHIPCTL_4331_GPIOCLK_ON_SPROMCS BIT(5) /* set drive out GPIO_CLK on sprom_cs pin */#define BCMA_CHIPCTL_4331_PCIE_MDIO_ON_SPROMCS BIT(6) /* use sprom_cs pin as PCIE mdio interface */#define BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5 BIT(7) /* aband extpa will be at gpio2/5 and sprom_dout */#define BCMA_CHIPCTL_4331_OVR_PIPEAUXCLKEN BIT(8) /* override core control on pipe_AuxClkEnable */#define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN BIT(9) /* override core control on pipe_AuxPowerDown */#define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN BIT(10) /* pcie_auxclkenable */#define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN BIT(11) /* pcie_pipe_pllpowerdown */#define BCMA_CHIPCTL_4331_EXTPA_EN2 BIT(12) /* 0 ext pa disable, 1 ext pa enabled */#define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */#define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */
/* 43224 chip-specific ChipControl register bits */#define BCMA_CCTRL_43224_GPIO_TOGGLE 0x8000 /* gpio[3:0] pins as btcoex or s/w gpio */#define BCMA_CCTRL_43224A0_12MA_LED_DRIVE 0x00F000F0 /* 12 mA drive strength */#define BCMA_CCTRL_43224B0_12MA_LED_DRIVE 0xF0 /* 12 mA drive strength for later 43224s */
/* 4313 Chip specific ChipControl register bits */#define BCMA_CCTRL_4313_12MA_LED_DRIVE 0x00000007 /* 12 mA drive strengh for later 4313 */
/* BCM5357 ChipControl register bits */#define BCMA_CHIPCTL_5357_EXTPA BIT(14)#define BCMA_CHIPCTL_5357_ANT_MUX_2O3 BIT(15)#define BCMA_CHIPCTL_5357_NFLASH BIT(16)#define BCMA_CHIPCTL_5357_I2S_PINS_ENABLE BIT(18)#define BCMA_CHIPCTL_5357_I2CSPI_PINS_ENABLE BIT(19)
#define BCMA_RES_4314_LPLDO_PU BIT(0)#define BCMA_RES_4314_PMU_SLEEP_DIS BIT(1)#define BCMA_RES_4314_PMU_BG_PU BIT(2)#define BCMA_RES_4314_CBUCK_LPOM_PU BIT(3)#define BCMA_RES_4314_CBUCK_PFM_PU BIT(4)#define BCMA_RES_4314_CLDO_PU BIT(5)#define BCMA_RES_4314_LPLDO2_LVM BIT(6)#define BCMA_RES_4314_WL_PMU_PU BIT(7)#define BCMA_RES_4314_LNLDO_PU BIT(8)#define BCMA_RES_4314_LDO3P3_PU BIT(9)#define BCMA_RES_4314_OTP_PU BIT(10)#define BCMA_RES_4314_XTAL_PU BIT(11)#define BCMA_RES_4314_WL_PWRSW_PU BIT(12)#define BCMA_RES_4314_LQ_AVAIL BIT(13)#define BCMA_RES_4314_LOGIC_RET BIT(14)#define BCMA_RES_4314_MEM_SLEEP BIT(15)#define BCMA_RES_4314_MACPHY_RET BIT(16)#define BCMA_RES_4314_WL_CORE_READY BIT(17)#define BCMA_RES_4314_ILP_REQ BIT(18)#define BCMA_RES_4314_ALP_AVAIL BIT(19)#define BCMA_RES_4314_MISC_PWRSW_PU BIT(20)#define BCMA_RES_4314_SYNTH_PWRSW_PU BIT(21)#define BCMA_RES_4314_RX_PWRSW_PU BIT(22)#define BCMA_RES_4314_RADIO_PU BIT(23)#define BCMA_RES_4314_VCO_LDO_PU BIT(24)#define BCMA_RES_4314_AFE_LDO_PU BIT(25)#define BCMA_RES_4314_RX_LDO_PU BIT(26)#define BCMA_RES_4314_TX_LDO_PU BIT(27)#define BCMA_RES_4314_HT_AVAIL BIT(28)#define BCMA_RES_4314_MACPHY_CLK_AVAIL BIT(29)
/* Data for the PMU, if available. * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) */struct bcma_chipcommon_pmu { struct bcma_device *core; /* Can be separated core or just ChipCommon one */ u8 rev; /* PMU revision */ u32 crystalfreq; /* The active crystal frequency (in kHz) */};
#ifdef CONFIG_BCMA_PFLASHstruct bcma_pflash { bool present;};#endif
#ifdef CONFIG_BCMA_SFLASHstruct mtd_info;
struct bcma_sflash { bool present; u32 blocksize; u16 numblocks; u32 size;};#endif
#ifdef CONFIG_BCMA_NFLASHstruct bcma_nflash { /* Must be the fist member for the brcmnand driver to * de-reference that structure. */ struct brcmnand_platform_data brcmnand_info; bool present; bool boot; /* This is the flash the SoC boots from */};#endif
#ifdef CONFIG_BCMA_DRIVER_MIPSstruct bcma_serial_port { void *regs; unsigned long clockspeed; unsigned int irq; unsigned int baud_base; unsigned int reg_shift;};#endif /* CONFIG_BCMA_DRIVER_MIPS */
struct bcma_drv_cc { struct bcma_device *core; u32 status; u32 capabilities; u32 capabilities_ext; u8 setup_done:1; u8 early_setup_done:1; /* Fast Powerup Delay constant */ u16 fast_pwrup_delay; struct bcma_chipcommon_pmu pmu;#ifdef CONFIG_BCMA_PFLASH struct bcma_pflash pflash;#endif#ifdef CONFIG_BCMA_SFLASH struct bcma_sflash sflash;#endif#ifdef CONFIG_BCMA_NFLASH struct bcma_nflash nflash;#endif
#ifdef CONFIG_BCMA_DRIVER_MIPS int nr_serial_ports; struct bcma_serial_port serial_ports[4];#endif /* CONFIG_BCMA_DRIVER_MIPS */ u32 ticks_per_ms; struct platform_device *watchdog;
/* Lock for GPIO register access. */ spinlock_t gpio_lock;#ifdef CONFIG_BCMA_DRIVER_GPIO struct gpio_chip gpio;#endif};
struct bcma_drv_cc_b { struct bcma_device *core; u8 setup_done:1; void __iomem *mii;};
/* Register access */#define bcma_cc_read32(cc, offset) \ bcma_read32((cc)->core, offset)#define bcma_cc_write32(cc, offset, val) \ bcma_write32((cc)->core, offset, val)
#define bcma_cc_mask32(cc, offset, mask) \ bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) & (mask))#define bcma_cc_set32(cc, offset, set) \ bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) | (set))#define bcma_cc_maskset32(cc, offset, mask, set) \ bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set))
/* PMU registers access */#define bcma_pmu_read32(cc, offset) \ bcma_read32((cc)->pmu.core, offset)#define bcma_pmu_write32(cc, offset, val) \ bcma_write32((cc)->pmu.core, offset, val)
#define bcma_pmu_mask32(cc, offset, mask) \ bcma_pmu_write32(cc, offset, bcma_pmu_read32(cc, offset) & (mask))#define bcma_pmu_set32(cc, offset, set) \ bcma_pmu_write32(cc, offset, bcma_pmu_read32(cc, offset) | (set))#define bcma_pmu_maskset32(cc, offset, mask, set) \ bcma_pmu_write32(cc, offset, (bcma_pmu_read32(cc, offset) & (mask)) | (set))
extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks);
extern u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc);
void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value);
u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask);
/* Chipcommon GPIO pin access. */u32 bcma_chipco_gpio_in(struct bcma_drv_cc *cc, u32 mask);u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value);u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value);u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value);u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value);u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value);u32 bcma_chipco_gpio_pullup(struct bcma_drv_cc *cc, u32 mask, u32 value);u32 bcma_chipco_gpio_pulldown(struct bcma_drv_cc *cc, u32 mask, u32 value);
/* PMU support */extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value);extern void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask, u32 set);extern void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask, u32 set);extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask, u32 set);extern void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid);
extern u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc);
void bcma_chipco_b_mii_write(struct bcma_drv_cc_b *ccb, u32 offset, u32 value);
#endif /* LINUX_BCMA_DRIVER_CC_H_ */