Something went wrong. Try again.
(I'm so sorry!) Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel os linux
Something went wrong. Try again.
1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039104010411042104310441045104610471048104910501051105210531054105510561057105810591060106110621063106410651066106710681069107010711072107310741075107610771078107910801081108210831084108510861087108810891090109110921093109410951096109710981099110011011102110311041105110611071108110911101111111211131114111511161117111811191120112111221123112411251126112711281129113011311132113311341135113611371138113911401141114211431144114511461147114811491150115111521153115411551156115711581159116011611162116311641165116611671168116911701171117211731174117511761177117811791180118111821183118411851186118711881189119011911192119311941195119611971198119912001201120212031204120512061207120812091210121112121213121412151216121712181219122012211222122312241225122612271228122912301231123212331234123512361237123812391240124112421243124412451246124712481249125012511252125312541255125612571258125912601261126212631264126512661267126812691270127112721273127412751276127712781279128012811282128312841285128612871288128912901291129212931294129512961297129812991300130113021303130413051306130713081309131013111312131313141315131613171318131913201321132213231324132513261327132813291330133113321333133413351336133713381339134013411342134313441345134613471348134913501351135213531354135513561357135813591360136113621363136413651366136713681369137013711372137313741375137613771378137913801381138213831384138513861387138813891390139113921393139413951396139713981399140014011402140314041405140614071408140914101411141214131414141514161417141814191420142114221423142414251426142714281429143014311432143314341435143614371438143914401441144214431444144514461447144814491450145114521453145414551456145714581459146014611462146314641465146614671468146914701471147214731474147514761477147814791480148114821483148414851486148714881489149014911492149314941495149614971498149915001501150215031504150515061507150815091510151115121513151415151516151715181519152015211522152315241525152615271528152915301531153215331534153515361537153815391540154115421543154415451546154715481549155015511552155315541555155615571558155915601561156215631564156515661567156815691570157115721573157415751576157715781579158015811582158315841585158615871588158915901591159215931594159515961597159815991600160116021603160416051606160716081609161016111612161316141615161616171618161916201621162216231624162516261627162816291630163116321633163416351636163716381639164016411642164316441645164616471648164916501651165216531654165516561657165816591660166116621663166416651666166716681669167016711672167316741675167616771678167916801681168216831684168516861687168816891690169116921693169416951696169716981699170017011702170317041705170617071708170917101711171217131714171517161717171817191720172117221723172417251726172717281729173017311732173317341735173617371738173917401741174217431744174517461747174817491750175117521753175417551756175717581759176017611762176317641765176617671768176917701771177217731774177517761777177817791780178117821783178417851786178717881789179017911792179317941795179617971798179918001801180218031804180518061807180818091810181118121813181418151816181718181819182018211822182318241825182618271828182918301831183218331834183518361837183818391840184118421843184418451846184718481849185018511852185318541855185618571858185918601861186218631864186518661867186818691870187118721873187418751876187718781879188018811882// SPDX-License-Identifier: GPL-2.0+/* * mxser.c -- MOXA Smartio/Industio family multiport serial driver. * * Copyright (C) 1999-2006 Moxa Technologies (support@moxa.com). * Copyright (C) 2006-2008 Jiri Slaby <jirislaby@gmail.com> * * This code is loosely based on the 1.8 moxa driver which is based on * Linux serial driver, written by Linus Torvalds, Theodore T'so and * others. * * Fed through a cleanup, indent and remove of non 2.6 code by Alan Cox * <alan@lxorguk.ukuu.org.uk>. The original 1.8 code is available on * www.moxa.com. * - Fixed x86_64 cleanness */
#include <linux/module.h>#include <linux/errno.h>#include <linux/signal.h>#include <linux/sched.h>#include <linux/timer.h>#include <linux/interrupt.h>#include <linux/tty.h>#include <linux/tty_flip.h>#include <linux/serial.h>#include <linux/serial_reg.h>#include <linux/major.h>#include <linux/string.h>#include <linux/fcntl.h>#include <linux/ptrace.h>#include <linux/ioport.h>#include <linux/mm.h>#include <linux/delay.h>#include <linux/pci.h>#include <linux/bitops.h>#include <linux/slab.h>#include <linux/ratelimit.h>
#include <asm/io.h>#include <asm/irq.h>#include <linux/uaccess.h>
/* * Semi-public control interfaces */
/* * MOXA ioctls */
#define MOXA 0x400#define MOXA_SET_OP_MODE (MOXA + 66)#define MOXA_GET_OP_MODE (MOXA + 67)
#define RS232_MODE 0#define RS485_2WIRE_MODE 1#define RS422_MODE 2#define RS485_4WIRE_MODE 3#define OP_MODE_MASK 3
/* --------------------------------------------------- */
/* * Follow just what Moxa Must chip defines. * * When LCR register (offset 0x03) is written the following value, the Must chip * will enter enhanced mode. And a write to EFR (offset 0x02) bit 6,7 will * change bank. */#define MOXA_MUST_ENTER_ENHANCED 0xBF
/* when enhanced mode is enabled, access to general bank register */#define MOXA_MUST_GDL_REGISTER 0x07#define MOXA_MUST_GDL_MASK 0x7F#define MOXA_MUST_GDL_HAS_BAD_DATA 0x80
#define MOXA_MUST_LSR_RERR 0x80 /* error in receive FIFO *//* enhanced register bank select and enhanced mode setting register *//* This works only when LCR register equals to 0xBF */#define MOXA_MUST_EFR_REGISTER 0x02#define MOXA_MUST_EFR_EFRB_ENABLE 0x10 /* enhanced mode enable *//* enhanced register bank set 0, 1, 2 */#define MOXA_MUST_EFR_BANK0 0x00#define MOXA_MUST_EFR_BANK1 0x40#define MOXA_MUST_EFR_BANK2 0x80#define MOXA_MUST_EFR_BANK3 0xC0#define MOXA_MUST_EFR_BANK_MASK 0xC0
/* set XON1 value register, when LCR=0xBF and change to bank0 */#define MOXA_MUST_XON1_REGISTER 0x04
/* set XON2 value register, when LCR=0xBF and change to bank0 */#define MOXA_MUST_XON2_REGISTER 0x05
/* set XOFF1 value register, when LCR=0xBF and change to bank0 */#define MOXA_MUST_XOFF1_REGISTER 0x06
/* set XOFF2 value register, when LCR=0xBF and change to bank0 */#define MOXA_MUST_XOFF2_REGISTER 0x07
#define MOXA_MUST_RBRTL_REGISTER 0x04#define MOXA_MUST_RBRTH_REGISTER 0x05#define MOXA_MUST_RBRTI_REGISTER 0x06#define MOXA_MUST_THRTL_REGISTER 0x07#define MOXA_MUST_ENUM_REGISTER 0x04#define MOXA_MUST_HWID_REGISTER 0x05#define MOXA_MUST_ECR_REGISTER 0x06#define MOXA_MUST_CSR_REGISTER 0x07
#define MOXA_MUST_FCR_GDA_MODE_ENABLE 0x20 /* good data mode enable */#define MOXA_MUST_FCR_GDA_ONLY_ENABLE 0x10 /* only good data put into RxFIFO */
#define MOXA_MUST_IER_ECTSI 0x80 /* enable CTS interrupt */#define MOXA_MUST_IER_ERTSI 0x40 /* enable RTS interrupt */#define MOXA_MUST_IER_XINT 0x20 /* enable Xon/Xoff interrupt */#define MOXA_MUST_IER_EGDAI 0x10 /* enable GDA interrupt */
#define MOXA_MUST_RECV_ISR (UART_IER_RDI | MOXA_MUST_IER_EGDAI)
/* GDA interrupt pending */#define MOXA_MUST_IIR_GDA 0x1C#define MOXA_MUST_IIR_RDA 0x04#define MOXA_MUST_IIR_RTO 0x0C#define MOXA_MUST_IIR_LSR 0x06
/* received Xon/Xoff or specical interrupt pending */#define MOXA_MUST_IIR_XSC 0x10
/* RTS/CTS change state interrupt pending */#define MOXA_MUST_IIR_RTSCTS 0x20#define MOXA_MUST_IIR_MASK 0x3E
#define MOXA_MUST_MCR_XON_FLAG 0x40#define MOXA_MUST_MCR_XON_ANY 0x80#define MOXA_MUST_MCR_TX_XON 0x08
#define MOXA_MUST_EFR_SF_MASK 0x0F /* software flow control on chip mask value */#define MOXA_MUST_EFR_SF_TX1 0x08 /* send Xon1/Xoff1 */#define MOXA_MUST_EFR_SF_TX2 0x04 /* send Xon2/Xoff2 */#define MOXA_MUST_EFR_SF_TX12 0x0C /* send Xon1,Xon2/Xoff1,Xoff2 */#define MOXA_MUST_EFR_SF_TX_NO 0x00 /* don't send Xon/Xoff */#define MOXA_MUST_EFR_SF_TX_MASK 0x0C /* Tx software flow control mask */#define MOXA_MUST_EFR_SF_RX_NO 0x00 /* don't receive Xon/Xoff */#define MOXA_MUST_EFR_SF_RX1 0x02 /* receive Xon1/Xoff1 */#define MOXA_MUST_EFR_SF_RX2 0x01 /* receive Xon2/Xoff2 */#define MOXA_MUST_EFR_SF_RX12 0x03 /* receive Xon1,Xon2/Xoff1,Xoff2 */#define MOXA_MUST_EFR_SF_RX_MASK 0x03 /* Rx software flow control mask */
#define MXSERMAJOR 174
#define MXSER_BOARDS 4 /* Max. boards */#define MXSER_PORTS_PER_BOARD 8 /* Max. ports per board */#define MXSER_PORTS (MXSER_BOARDS * MXSER_PORTS_PER_BOARD)#define MXSER_ISR_PASS_LIMIT 100
#define WAKEUP_CHARS 256
#define MXSER_BAUD_BASE 921600#define MXSER_CUSTOM_DIVISOR (MXSER_BAUD_BASE * 16)
#define PCI_DEVICE_ID_MOXA_RC7000 0x0001#define PCI_DEVICE_ID_MOXA_CP102 0x1020#define PCI_DEVICE_ID_MOXA_CP102UL 0x1021#define PCI_DEVICE_ID_MOXA_CP102U 0x1022#define PCI_DEVICE_ID_MOXA_CP102UF 0x1023#define PCI_DEVICE_ID_MOXA_C104 0x1040#define PCI_DEVICE_ID_MOXA_CP104U 0x1041#define PCI_DEVICE_ID_MOXA_CP104JU 0x1042#define PCI_DEVICE_ID_MOXA_CP104EL 0x1043#define PCI_DEVICE_ID_MOXA_POS104UL 0x1044#define PCI_DEVICE_ID_MOXA_CB108 0x1080#define PCI_DEVICE_ID_MOXA_CP112UL 0x1120#define PCI_DEVICE_ID_MOXA_CT114 0x1140#define PCI_DEVICE_ID_MOXA_CP114 0x1141#define PCI_DEVICE_ID_MOXA_CB114 0x1142#define PCI_DEVICE_ID_MOXA_CP114UL 0x1143#define PCI_DEVICE_ID_MOXA_CP118U 0x1180#define PCI_DEVICE_ID_MOXA_CP118EL 0x1181#define PCI_DEVICE_ID_MOXA_CP132 0x1320#define PCI_DEVICE_ID_MOXA_CP132U 0x1321#define PCI_DEVICE_ID_MOXA_CP134U 0x1340#define PCI_DEVICE_ID_MOXA_CB134I 0x1341#define PCI_DEVICE_ID_MOXA_CP138U 0x1380#define PCI_DEVICE_ID_MOXA_C168 0x1680#define PCI_DEVICE_ID_MOXA_CP168U 0x1681#define PCI_DEVICE_ID_MOXA_CP168EL 0x1682
#define MXSER_NPORTS(ddata) ((ddata) & 0xffU)#define MXSER_HIGHBAUD 0x0100
enum mxser_must_hwid { MOXA_OTHER_UART = 0x00, MOXA_MUST_MU150_HWID = 0x01, MOXA_MUST_MU860_HWID = 0x02,};
static const struct { u8 type; u8 fifo_size; u8 rx_high_water; u8 rx_low_water; speed_t max_baud;} Gpci_uart_info[] = { { MOXA_OTHER_UART, 16, 14, 1, 921600 }, { MOXA_MUST_MU150_HWID, 64, 48, 16, 230400 }, { MOXA_MUST_MU860_HWID, 128, 96, 32, 921600 }};#define UART_INFO_NUM ARRAY_SIZE(Gpci_uart_info)
static const struct pci_device_id mxser_pcibrds[] = { { PCI_DEVICE_DATA(MOXA, C168, 8) }, { PCI_DEVICE_DATA(MOXA, C104, 4) }, { PCI_DEVICE_DATA(MOXA, CP132, 2) }, { PCI_DEVICE_DATA(MOXA, CP114, 4) }, { PCI_DEVICE_DATA(MOXA, CT114, 4) }, { PCI_DEVICE_DATA(MOXA, CP102, 2 | MXSER_HIGHBAUD) }, { PCI_DEVICE_DATA(MOXA, CP104U, 4) }, { PCI_DEVICE_DATA(MOXA, CP168U, 8) }, { PCI_DEVICE_DATA(MOXA, CP132U, 2) }, { PCI_DEVICE_DATA(MOXA, CP134U, 4) }, { PCI_DEVICE_DATA(MOXA, CP104JU, 4) }, { PCI_DEVICE_DATA(MOXA, RC7000, 8) }, /* RC7000 */ { PCI_DEVICE_DATA(MOXA, CP118U, 8) }, { PCI_DEVICE_DATA(MOXA, CP102UL, 2) }, { PCI_DEVICE_DATA(MOXA, CP102U, 2) }, { PCI_DEVICE_DATA(MOXA, CP118EL, 8) }, { PCI_DEVICE_DATA(MOXA, CP168EL, 8) }, { PCI_DEVICE_DATA(MOXA, CP104EL, 4) }, { PCI_DEVICE_DATA(MOXA, CB108, 8) }, { PCI_DEVICE_DATA(MOXA, CB114, 4) }, { PCI_DEVICE_DATA(MOXA, CB134I, 4) }, { PCI_DEVICE_DATA(MOXA, CP138U, 8) }, { PCI_DEVICE_DATA(MOXA, POS104UL, 4) }, { PCI_DEVICE_DATA(MOXA, CP114UL, 4) }, { PCI_DEVICE_DATA(MOXA, CP102UF, 2) }, { PCI_DEVICE_DATA(MOXA, CP112UL, 2) }, { }};MODULE_DEVICE_TABLE(pci, mxser_pcibrds);
static int ttymajor = MXSERMAJOR;
/* Variables for insmod */
MODULE_AUTHOR("Casper Yang");MODULE_DESCRIPTION("MOXA Smartio/Industio Family Multiport Board Device Driver");module_param(ttymajor, int, 0);MODULE_LICENSE("GPL");
struct mxser_board;
struct mxser_port { struct tty_port port; struct mxser_board *board;
unsigned long ioaddr; unsigned long opmode_ioaddr;
u8 rx_high_water; u8 rx_low_water; int type; /* UART type */
u8 x_char; /* xon/xoff character */ u8 IER; /* Interrupt Enable Register */ u8 MCR; /* Modem control register */ u8 FCR; /* FIFO control register */
struct async_icount icount; /* kernel counters for 4 input interrupts */ unsigned int timeout;
u8 read_status_mask; u8 ignore_status_mask; u8 xmit_fifo_size;
spinlock_t slock;};
struct mxser_board { unsigned int idx; unsigned short nports; int irq; unsigned long vector;
enum mxser_must_hwid must_hwid; speed_t max_baud;
struct mxser_port ports[] /* __counted_by(nports) */;};
static DECLARE_BITMAP(mxser_boards, MXSER_BOARDS);static struct tty_driver *mxvar_sdriver;
static u8 __mxser_must_set_EFR(unsigned long baseio, u8 clear, u8 set, bool restore_LCR){ u8 oldlcr, efr;
oldlcr = inb(baseio + UART_LCR); outb(MOXA_MUST_ENTER_ENHANCED, baseio + UART_LCR);
efr = inb(baseio + MOXA_MUST_EFR_REGISTER); efr &= ~clear; efr |= set;
outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
if (restore_LCR) outb(oldlcr, baseio + UART_LCR);
return oldlcr;}
static u8 mxser_must_select_bank(unsigned long baseio, u8 bank){ return __mxser_must_set_EFR(baseio, MOXA_MUST_EFR_BANK_MASK, bank, false);}
static void mxser_set_must_xon1_value(unsigned long baseio, u8 value){ u8 oldlcr = mxser_must_select_bank(baseio, MOXA_MUST_EFR_BANK0); outb(value, baseio + MOXA_MUST_XON1_REGISTER); outb(oldlcr, baseio + UART_LCR);}
static void mxser_set_must_xoff1_value(unsigned long baseio, u8 value){ u8 oldlcr = mxser_must_select_bank(baseio, MOXA_MUST_EFR_BANK0); outb(value, baseio + MOXA_MUST_XOFF1_REGISTER); outb(oldlcr, baseio + UART_LCR);}
static void mxser_set_must_fifo_value(struct mxser_port *info){ u8 oldlcr = mxser_must_select_bank(info->ioaddr, MOXA_MUST_EFR_BANK1); outb(info->rx_high_water, info->ioaddr + MOXA_MUST_RBRTH_REGISTER); outb(info->rx_high_water, info->ioaddr + MOXA_MUST_RBRTI_REGISTER); outb(info->rx_low_water, info->ioaddr + MOXA_MUST_RBRTL_REGISTER); outb(oldlcr, info->ioaddr + UART_LCR);}
static void mxser_set_must_enum_value(unsigned long baseio, u8 value){ u8 oldlcr = mxser_must_select_bank(baseio, MOXA_MUST_EFR_BANK2); outb(value, baseio + MOXA_MUST_ENUM_REGISTER); outb(oldlcr, baseio + UART_LCR);}
static u8 mxser_get_must_hardware_id(unsigned long baseio){ u8 oldlcr = mxser_must_select_bank(baseio, MOXA_MUST_EFR_BANK2); u8 id = inb(baseio + MOXA_MUST_HWID_REGISTER); outb(oldlcr, baseio + UART_LCR);
return id;}
static void mxser_must_set_EFR(unsigned long baseio, u8 clear, u8 set){ __mxser_must_set_EFR(baseio, clear, set, true);}
static void mxser_must_set_enhance_mode(unsigned long baseio, bool enable){ mxser_must_set_EFR(baseio, enable ? 0 : MOXA_MUST_EFR_EFRB_ENABLE, enable ? MOXA_MUST_EFR_EFRB_ENABLE : 0);}
static void mxser_must_no_sw_flow_control(unsigned long baseio){ mxser_must_set_EFR(baseio, MOXA_MUST_EFR_SF_MASK, 0);}
static void mxser_must_set_tx_sw_flow_control(unsigned long baseio, bool enable){ mxser_must_set_EFR(baseio, MOXA_MUST_EFR_SF_TX_MASK, enable ? MOXA_MUST_EFR_SF_TX1 : 0);}
static void mxser_must_set_rx_sw_flow_control(unsigned long baseio, bool enable){ mxser_must_set_EFR(baseio, MOXA_MUST_EFR_SF_RX_MASK, enable ? MOXA_MUST_EFR_SF_RX1 : 0);}
static enum mxser_must_hwid mxser_must_get_hwid(unsigned long io){ u8 oldmcr, hwid; int i;
outb(0, io + UART_LCR); mxser_must_set_enhance_mode(io, false); oldmcr = inb(io + UART_MCR); outb(0, io + UART_MCR); mxser_set_must_xon1_value(io, 0x11); if (inb(io + UART_MCR) != 0) { outb(oldmcr, io + UART_MCR); return MOXA_OTHER_UART; }
hwid = mxser_get_must_hardware_id(io); for (i = 1; i < UART_INFO_NUM; i++) /* 0 = OTHER_UART */ if (hwid == Gpci_uart_info[i].type) return hwid;
return MOXA_OTHER_UART;}
static bool mxser_16550A_or_MUST(struct mxser_port *info){ return info->type == PORT_16550A || info->board->must_hwid;}
static void mxser_process_txrx_fifo(struct mxser_port *info){ unsigned int i;
if (info->type == PORT_16450 || info->type == PORT_8250) { info->rx_high_water = 1; info->rx_low_water = 1; info->xmit_fifo_size = 1; return; }
for (i = 0; i < UART_INFO_NUM; i++) if (info->board->must_hwid == Gpci_uart_info[i].type) { info->rx_low_water = Gpci_uart_info[i].rx_low_water; info->rx_high_water = Gpci_uart_info[i].rx_high_water; info->xmit_fifo_size = Gpci_uart_info[i].fifo_size; break; }}
static void __mxser_start_tx(struct mxser_port *info){ outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER); info->IER |= UART_IER_THRI; outb(info->IER, info->ioaddr + UART_IER);}
static void mxser_start_tx(struct mxser_port *info){ guard(spinlock_irqsave)(&info->slock); __mxser_start_tx(info);}
static void __mxser_stop_tx(struct mxser_port *info){ info->IER &= ~UART_IER_THRI; outb(info->IER, info->ioaddr + UART_IER);}
static bool mxser_carrier_raised(struct tty_port *port){ struct mxser_port *mp = container_of(port, struct mxser_port, port);
return inb(mp->ioaddr + UART_MSR) & UART_MSR_DCD;}
static void mxser_dtr_rts(struct tty_port *port, bool active){ struct mxser_port *mp = container_of(port, struct mxser_port, port); u8 mcr;
guard(spinlock_irqsave)(&mp->slock); mcr = inb(mp->ioaddr + UART_MCR); if (active) mcr |= UART_MCR_DTR | UART_MCR_RTS; else mcr &= ~(UART_MCR_DTR | UART_MCR_RTS); outb(mcr, mp->ioaddr + UART_MCR);}
static int mxser_set_baud(struct tty_struct *tty, speed_t newspd){ struct mxser_port *info = tty->driver_data; unsigned int quot = 0, baud; unsigned char cval; u64 timeout;
if (newspd > info->board->max_baud) return -1;
if (newspd == 134) { quot = 2 * MXSER_BAUD_BASE / 269; tty_encode_baud_rate(tty, 134, 134); } else if (newspd) { quot = MXSER_BAUD_BASE / newspd; if (quot == 0) quot = 1; baud = MXSER_BAUD_BASE / quot; tty_encode_baud_rate(tty, baud, baud); } else { quot = 0; }
/* * worst case (128 * 1000 * 10 * 18432) needs 35 bits, so divide in the * u64 domain */ timeout = (u64)info->xmit_fifo_size * HZ * 10 * quot; do_div(timeout, MXSER_BAUD_BASE); info->timeout = timeout + HZ / 50; /* Add .02 seconds of slop */
if (quot) { info->MCR |= UART_MCR_DTR; outb(info->MCR, info->ioaddr + UART_MCR); } else { info->MCR &= ~UART_MCR_DTR; outb(info->MCR, info->ioaddr + UART_MCR); return 0; }
cval = inb(info->ioaddr + UART_LCR);
outb(cval | UART_LCR_DLAB, info->ioaddr + UART_LCR); /* set DLAB */
outb(quot & 0xff, info->ioaddr + UART_DLL); /* LS of divisor */ outb(quot >> 8, info->ioaddr + UART_DLM); /* MS of divisor */ outb(cval, info->ioaddr + UART_LCR); /* reset DLAB */
if (C_BAUD(tty) == BOTHER) { quot = MXSER_BAUD_BASE % newspd; quot *= 8; if (quot % newspd > newspd / 2) { quot /= newspd; quot++; } else quot /= newspd;
mxser_set_must_enum_value(info->ioaddr, quot); } else { mxser_set_must_enum_value(info->ioaddr, 0); }
return 0;}
static void mxser_handle_cts(struct tty_struct *tty, struct mxser_port *info, u8 msr){ bool cts = msr & UART_MSR_CTS;
if (tty->hw_stopped) { if (cts) { tty->hw_stopped = false;
if (!mxser_16550A_or_MUST(info)) __mxser_start_tx(info); tty_wakeup(tty); } return; } else if (cts) return;
tty->hw_stopped = true; if (!mxser_16550A_or_MUST(info)) __mxser_stop_tx(info);}
/* * This routine is called to set the UART divisor registers to match * the specified baud rate for a serial port. */static void mxser_change_speed(struct tty_struct *tty, const struct ktermios *old_termios){ struct mxser_port *info = tty->driver_data; unsigned cflag, cval;
cflag = tty->termios.c_cflag;
if (mxser_set_baud(tty, tty_get_baud_rate(tty))) { /* Use previous rate on a failure */ if (old_termios) { speed_t baud = tty_termios_baud_rate(old_termios); tty_encode_baud_rate(tty, baud, baud); } }
/* byte size and parity */ cval = UART_LCR_WLEN(tty_get_char_size(tty->termios.c_cflag));
if (cflag & CSTOPB) cval |= UART_LCR_STOP; if (cflag & PARENB) cval |= UART_LCR_PARITY; if (!(cflag & PARODD)) cval |= UART_LCR_EPAR; if (cflag & CMSPAR) cval |= UART_LCR_SPAR;
info->FCR = 0; if (info->board->must_hwid) { info->FCR |= UART_FCR_ENABLE_FIFO | MOXA_MUST_FCR_GDA_MODE_ENABLE; mxser_set_must_fifo_value(info); } else if (info->type != PORT_8250 && info->type != PORT_16450) { info->FCR |= UART_FCR_ENABLE_FIFO; switch (info->rx_high_water) { case 1: info->FCR |= UART_FCR_TRIGGER_1; break; case 4: info->FCR |= UART_FCR_TRIGGER_4; break; case 8: info->FCR |= UART_FCR_TRIGGER_8; break; default: info->FCR |= UART_FCR_TRIGGER_14; break; } }
/* CTS flow control flag and modem status interrupts */ info->IER &= ~UART_IER_MSI; info->MCR &= ~UART_MCR_AFE; tty_port_set_cts_flow(&info->port, cflag & CRTSCTS); if (cflag & CRTSCTS) { info->IER |= UART_IER_MSI; if (mxser_16550A_or_MUST(info)) { info->MCR |= UART_MCR_AFE; } else { mxser_handle_cts(tty, info, inb(info->ioaddr + UART_MSR)); } } outb(info->MCR, info->ioaddr + UART_MCR); tty_port_set_check_carrier(&info->port, ~cflag & CLOCAL); if (~cflag & CLOCAL) info->IER |= UART_IER_MSI; outb(info->IER, info->ioaddr + UART_IER);
/* * Set up parity check flag */ info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; if (I_INPCK(tty)) info->read_status_mask |= UART_LSR_FE | UART_LSR_PE; if (I_BRKINT(tty) || I_PARMRK(tty)) info->read_status_mask |= UART_LSR_BI;
info->ignore_status_mask = 0;
if (I_IGNBRK(tty)) { info->ignore_status_mask |= UART_LSR_BI; info->read_status_mask |= UART_LSR_BI; /* * If we're ignore parity and break indicators, ignore * overruns too. (For real raw support). */ if (I_IGNPAR(tty)) { info->ignore_status_mask |= UART_LSR_OE | UART_LSR_PE | UART_LSR_FE; info->read_status_mask |= UART_LSR_OE | UART_LSR_PE | UART_LSR_FE; } } if (info->board->must_hwid) { mxser_set_must_xon1_value(info->ioaddr, START_CHAR(tty)); mxser_set_must_xoff1_value(info->ioaddr, STOP_CHAR(tty)); mxser_must_set_rx_sw_flow_control(info->ioaddr, I_IXON(tty)); mxser_must_set_tx_sw_flow_control(info->ioaddr, I_IXOFF(tty)); }
outb(info->FCR, info->ioaddr + UART_FCR); outb(cval, info->ioaddr + UART_LCR);}
static u8 mxser_check_modem_status(struct tty_struct *tty, struct mxser_port *port){ u8 msr = inb(port->ioaddr + UART_MSR);
if (!(msr & UART_MSR_ANY_DELTA)) return msr;
/* update input line counters */ if (msr & UART_MSR_TERI) port->icount.rng++; if (msr & UART_MSR_DDSR) port->icount.dsr++; if (msr & UART_MSR_DDCD) port->icount.dcd++; if (msr & UART_MSR_DCTS) port->icount.cts++; wake_up_interruptible(&port->port.delta_msr_wait);
if (tty_port_check_carrier(&port->port) && (msr & UART_MSR_DDCD)) { if (msr & UART_MSR_DCD) wake_up_interruptible(&port->port.open_wait); }
if (tty_port_cts_enabled(&port->port)) mxser_handle_cts(tty, port, msr);
return msr;}
static void mxser_disable_and_clear_FIFO(struct mxser_port *info){ u8 fcr = UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT;
if (info->board->must_hwid) fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE;
outb(fcr, info->ioaddr + UART_FCR);}
static int mxser_activate(struct tty_port *port, struct tty_struct *tty){ struct mxser_port *info = container_of(port, struct mxser_port, port); unsigned long flags; int ret;
ret = tty_port_alloc_xmit_buf(port); if (ret < 0) return ret;
spin_lock_irqsave(&info->slock, flags);
if (!info->type) { set_bit(TTY_IO_ERROR, &tty->flags); spin_unlock_irqrestore(&info->slock, flags); ret = 0; goto err_free_xmit; }
/* * Clear the FIFO buffers and disable them * (they will be reenabled in mxser_change_speed()) */ mxser_disable_and_clear_FIFO(info);
/* * At this point there's no way the LSR could still be 0xFF; * if it is, then bail out, because there's likely no UART * here. */ if (inb(info->ioaddr + UART_LSR) == 0xff) { spin_unlock_irqrestore(&info->slock, flags); if (capable(CAP_SYS_ADMIN)) { set_bit(TTY_IO_ERROR, &tty->flags); return 0; }
ret = -ENODEV; goto err_free_xmit; }
/* * Clear the interrupt registers. */ (void) inb(info->ioaddr + UART_LSR); (void) inb(info->ioaddr + UART_RX); (void) inb(info->ioaddr + UART_IIR); (void) inb(info->ioaddr + UART_MSR);
/* * Now, initialize the UART */ outb(UART_LCR_WLEN8, info->ioaddr + UART_LCR); /* reset DLAB */ info->MCR = UART_MCR_DTR | UART_MCR_RTS; outb(info->MCR, info->ioaddr + UART_MCR);
/* * Finally, enable interrupts */ info->IER = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI;
if (info->board->must_hwid) info->IER |= MOXA_MUST_IER_EGDAI; outb(info->IER, info->ioaddr + UART_IER); /* enable interrupts */
/* * And clear the interrupt registers again for luck. */ (void) inb(info->ioaddr + UART_LSR); (void) inb(info->ioaddr + UART_RX); (void) inb(info->ioaddr + UART_IIR); (void) inb(info->ioaddr + UART_MSR);
clear_bit(TTY_IO_ERROR, &tty->flags); kfifo_reset(&port->xmit_fifo);
/* * and set the speed of the serial port */ mxser_change_speed(tty, NULL); spin_unlock_irqrestore(&info->slock, flags);
return 0;err_free_xmit: tty_port_free_xmit_buf(port); return ret;}
/* * To stop accepting input, we disable the receive line status interrupts, and * tell the interrupt driver to stop checking the data ready bit in the line * status register. */static void mxser_stop_rx(struct mxser_port *info){ info->IER &= ~UART_IER_RLSI; if (info->board->must_hwid) info->IER &= ~MOXA_MUST_RECV_ISR;
outb(info->IER, info->ioaddr + UART_IER);}
/* * This routine will shutdown a serial port */static void mxser_shutdown_port(struct tty_port *port){ struct mxser_port *info = container_of(port, struct mxser_port, port);
scoped_guard(spinlock_irqsave, &info->slock) { mxser_stop_rx(info);
/* * clear delta_msr_wait queue to avoid mem leaks: we may free the irq * here so the queue might never be waken up */ wake_up_interruptible(&info->port.delta_msr_wait);
info->IER = 0; outb(0x00, info->ioaddr + UART_IER);
/* clear Rx/Tx FIFO's */ mxser_disable_and_clear_FIFO(info);
/* read data port to reset things */ (void)inb(info->ioaddr + UART_RX);
if (info->board->must_hwid) mxser_must_no_sw_flow_control(info->ioaddr); }
/* make sure ISR is not running while we free the buffer */ synchronize_irq(info->board->irq);
tty_port_free_xmit_buf(port);}
/* * This routine is called whenever a serial port is opened. It * enables interrupts for a serial port, linking in its async structure into * the IRQ chain. It also performs the serial-specific * initialization for the tty structure. */static int mxser_open(struct tty_struct *tty, struct file *filp){ struct tty_port *tport = tty->port; struct mxser_port *port = container_of(tport, struct mxser_port, port);
tty->driver_data = port;
return tty_port_open(tport, tty, filp);}
static void mxser_flush_buffer(struct tty_struct *tty){ struct mxser_port *info = tty->driver_data;
scoped_guard(spinlock_irqsave, &info->slock) { kfifo_reset(&info->port.xmit_fifo);
outb(info->FCR | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, info->ioaddr + UART_FCR); }
tty_wakeup(tty);}
static void mxser_close(struct tty_struct *tty, struct file *filp){ tty_port_close(tty->port, tty, filp);}
static ssize_t mxser_write(struct tty_struct *tty, const u8 *buf, size_t count){ struct mxser_port *info = tty->driver_data; size_t written; bool is_empty;
scoped_guard(spinlock_irqsave, &info->slock) { written = kfifo_in(&info->port.xmit_fifo, buf, count); is_empty = kfifo_is_empty(&info->port.xmit_fifo); }
if (!is_empty && !tty->flow.stopped) if (!tty->hw_stopped || mxser_16550A_or_MUST(info)) mxser_start_tx(info);
return written;}
static int mxser_put_char(struct tty_struct *tty, u8 ch){ struct mxser_port *info = tty->driver_data;
guard(spinlock_irqsave)(&info->slock); return kfifo_put(&info->port.xmit_fifo, ch);}
static void mxser_flush_chars(struct tty_struct *tty){ struct mxser_port *info = tty->driver_data;
if (kfifo_is_empty(&info->port.xmit_fifo) || tty->flow.stopped || (tty->hw_stopped && !mxser_16550A_or_MUST(info))) return;
mxser_start_tx(info);}
static unsigned int mxser_write_room(struct tty_struct *tty){ struct mxser_port *info = tty->driver_data;
return kfifo_avail(&info->port.xmit_fifo);}
static unsigned int mxser_chars_in_buffer(struct tty_struct *tty){ struct mxser_port *info = tty->driver_data;
return kfifo_len(&info->port.xmit_fifo);}
/* * ------------------------------------------------------------ * friends of mxser_ioctl() * ------------------------------------------------------------ */static int mxser_get_serial_info(struct tty_struct *tty, struct serial_struct *ss){ struct mxser_port *info = tty->driver_data; struct tty_port *port = &info->port; unsigned int closing_wait, close_delay;
guard(mutex)(&port->mutex);
close_delay = jiffies_to_msecs(info->port.close_delay) / 10; closing_wait = info->port.closing_wait; if (closing_wait != ASYNC_CLOSING_WAIT_NONE) closing_wait = jiffies_to_msecs(closing_wait) / 10;
ss->type = info->type; ss->line = tty->index; ss->port = info->ioaddr; ss->irq = info->board->irq; ss->flags = info->port.flags; ss->baud_base = MXSER_BAUD_BASE; ss->close_delay = close_delay; ss->closing_wait = closing_wait; ss->custom_divisor = MXSER_CUSTOM_DIVISOR;
return 0;}
static int mxser_set_serial_info(struct tty_struct *tty, struct serial_struct *ss){ struct mxser_port *info = tty->driver_data; struct tty_port *port = &info->port; speed_t baud; unsigned int old_speed, close_delay, closing_wait;
if (tty_io_error(tty)) return -EIO;
guard(mutex)(&port->mutex);
if (ss->irq != info->board->irq || ss->port != info->ioaddr) return -EINVAL;
old_speed = port->flags & ASYNC_SPD_MASK;
close_delay = msecs_to_jiffies(ss->close_delay * 10); closing_wait = ss->closing_wait; if (closing_wait != ASYNC_CLOSING_WAIT_NONE) closing_wait = msecs_to_jiffies(closing_wait * 10);
if (!capable(CAP_SYS_ADMIN)) { if ((ss->baud_base != MXSER_BAUD_BASE) || (close_delay != port->close_delay) || (closing_wait != port->closing_wait) || ((ss->flags & ~ASYNC_USR_MASK) != (port->flags & ~ASYNC_USR_MASK))) return -EPERM;
port->flags = (port->flags & ~ASYNC_USR_MASK) | (ss->flags & ASYNC_USR_MASK); } else { /* * OK, past this point, all the error checking has been done. * At this point, we start making changes..... */ port->flags = ((port->flags & ~ASYNC_FLAGS) | (ss->flags & ASYNC_FLAGS)); port->close_delay = close_delay; port->closing_wait = closing_wait; if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST && (ss->baud_base != MXSER_BAUD_BASE || ss->custom_divisor != MXSER_CUSTOM_DIVISOR)) { if (ss->custom_divisor == 0) return -EINVAL;
baud = ss->baud_base / ss->custom_divisor; tty_encode_baud_rate(tty, baud, baud); }
info->type = ss->type;
mxser_process_txrx_fifo(info); }
if (tty_port_initialized(port)) { if (old_speed != (port->flags & ASYNC_SPD_MASK)) { guard(spinlock_irqsave)(&info->slock); mxser_change_speed(tty, NULL); }
return 0; }
int retval = mxser_activate(port, tty); if (retval == 0) tty_port_set_initialized(port, true);
return retval;}
/* * mxser_get_lsr_info - get line status register info * * Purpose: Let user call ioctl() to get info when the UART physically * is emptied. On bus types like RS485, the transmitter must * release the bus after transmitting. This must be done when * the transmit shift register is empty, not be done when the * transmit holding register is empty. This functionality * allows an RS485 driver to be written in user space. */static int mxser_get_lsr_info(struct mxser_port *info, unsigned int __user *value){ unsigned int result; u8 status;
scoped_guard(spinlock_irqsave, &info->slock) status = inb(info->ioaddr + UART_LSR); result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0); return put_user(result, value);}
static int mxser_tiocmget(struct tty_struct *tty){ struct mxser_port *info = tty->driver_data; unsigned char control; u8 msr;
if (tty_io_error(tty)) return -EIO;
scoped_guard(spinlock_irqsave, &info->slock) { control = info->MCR; msr = mxser_check_modem_status(tty, info); }
return ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) | ((control & UART_MCR_DTR) ? TIOCM_DTR : 0) | ((msr & UART_MSR_DCD) ? TIOCM_CAR : 0) | ((msr & UART_MSR_RI) ? TIOCM_RNG : 0) | ((msr & UART_MSR_DSR) ? TIOCM_DSR : 0) | ((msr & UART_MSR_CTS) ? TIOCM_CTS : 0);}
static int mxser_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear){ struct mxser_port *info = tty->driver_data;
if (tty_io_error(tty)) return -EIO;
guard(spinlock_irqsave)(&info->slock);
if (set & TIOCM_RTS) info->MCR |= UART_MCR_RTS; if (set & TIOCM_DTR) info->MCR |= UART_MCR_DTR;
if (clear & TIOCM_RTS) info->MCR &= ~UART_MCR_RTS; if (clear & TIOCM_DTR) info->MCR &= ~UART_MCR_DTR;
outb(info->MCR, info->ioaddr + UART_MCR);
return 0;}
static int mxser_cflags_changed(struct mxser_port *info, unsigned long arg, struct async_icount *cprev){ struct async_icount cnow; int ret;
/* atomic copy */ scoped_guard(spinlock_irqsave, &info->slock) cnow = info->icount;
ret = ((arg & TIOCM_RNG) && (cnow.rng != cprev->rng)) || ((arg & TIOCM_DSR) && (cnow.dsr != cprev->dsr)) || ((arg & TIOCM_CD) && (cnow.dcd != cprev->dcd)) || ((arg & TIOCM_CTS) && (cnow.cts != cprev->cts));
*cprev = cnow;
return ret;}
/* We should likely switch to TIOCGRS485/TIOCSRS485. */static int mxser_ioctl_op_mode(struct mxser_port *port, int index, bool set, int __user *u_opmode){ int opmode, p = index % 4; int shiftbit = p * 2; u8 val;
if (port->board->must_hwid != MOXA_MUST_MU860_HWID) return -EFAULT;
if (set) { if (get_user(opmode, u_opmode)) return -EFAULT;
if (opmode & ~OP_MODE_MASK) return -EINVAL;
guard(spinlock_irq)(&port->slock); val = inb(port->opmode_ioaddr); val &= ~(OP_MODE_MASK << shiftbit); val |= (opmode << shiftbit); outb(val, port->opmode_ioaddr);
return 0; }
scoped_guard(spinlock_irq, &port->slock) opmode = inb(port->opmode_ioaddr) >> shiftbit;
return put_user(opmode & OP_MODE_MASK, u_opmode);}
static int mxser_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg){ struct mxser_port *info = tty->driver_data; struct async_icount cnow; void __user *argp = (void __user *)arg;
if (cmd == MOXA_SET_OP_MODE || cmd == MOXA_GET_OP_MODE) return mxser_ioctl_op_mode(info, tty->index, cmd == MOXA_SET_OP_MODE, argp);
if (cmd != TIOCMIWAIT && tty_io_error(tty)) return -EIO;
switch (cmd) { case TIOCSERGETLSR: /* Get line status register */ return mxser_get_lsr_info(info, argp); /* * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change * - mask passed in arg for lines of interest * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) * Caller should use TIOCGICOUNT to see which one it was */ case TIOCMIWAIT: /* note the counters on entry */ scoped_guard(spinlock_irqsave, &info->slock) cnow = info->icount;
return wait_event_interruptible(info->port.delta_msr_wait, mxser_cflags_changed(info, arg, &cnow)); default: return -ENOIOCTLCMD; } return 0;}
/* * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) * Return: write counters to the user passed counter struct * NB: both 1->0 and 0->1 transitions are counted except for * RI where only 0->1 is counted. */
static int mxser_get_icount(struct tty_struct *tty, struct serial_icounter_struct *icount)
{ struct mxser_port *info = tty->driver_data; struct async_icount cnow;
scoped_guard(spinlock_irqsave, &info->slock) cnow = info->icount;
icount->frame = cnow.frame; icount->brk = cnow.brk; icount->overrun = cnow.overrun; icount->buf_overrun = cnow.buf_overrun; icount->parity = cnow.parity; icount->rx = cnow.rx; icount->tx = cnow.tx; icount->cts = cnow.cts; icount->dsr = cnow.dsr; icount->rng = cnow.rng; icount->dcd = cnow.dcd; return 0;}
/* * This routine is called by the upper-layer tty layer to signal that * incoming characters should be throttled. */static void mxser_throttle(struct tty_struct *tty){ struct mxser_port *info = tty->driver_data;
if (I_IXOFF(tty)) { if (info->board->must_hwid) { info->IER &= ~MOXA_MUST_RECV_ISR; outb(info->IER, info->ioaddr + UART_IER); } else { info->x_char = STOP_CHAR(tty); outb(0, info->ioaddr + UART_IER); info->IER |= UART_IER_THRI; outb(info->IER, info->ioaddr + UART_IER); } }
if (C_CRTSCTS(tty)) { info->MCR &= ~UART_MCR_RTS; outb(info->MCR, info->ioaddr + UART_MCR); }}
static void mxser_unthrottle(struct tty_struct *tty){ struct mxser_port *info = tty->driver_data;
/* startrx */ if (I_IXOFF(tty)) { if (info->x_char) info->x_char = 0; else { if (info->board->must_hwid) { info->IER |= MOXA_MUST_RECV_ISR; outb(info->IER, info->ioaddr + UART_IER); } else { info->x_char = START_CHAR(tty); outb(0, info->ioaddr + UART_IER); info->IER |= UART_IER_THRI; outb(info->IER, info->ioaddr + UART_IER); } } }
if (C_CRTSCTS(tty)) { info->MCR |= UART_MCR_RTS; outb(info->MCR, info->ioaddr + UART_MCR); }}
/* * mxser_stop() and mxser_start() * * This routines are called before setting or resetting tty->flow.stopped. * They enable or disable transmitter interrupts, as necessary. */static void mxser_stop(struct tty_struct *tty){ struct mxser_port *info = tty->driver_data;
guard(spinlock_irqsave)(&info->slock); if (info->IER & UART_IER_THRI) __mxser_stop_tx(info);}
static void mxser_start(struct tty_struct *tty){ struct mxser_port *info = tty->driver_data;
guard(spinlock_irqsave)(&info->slock); if (!kfifo_is_empty(&info->port.xmit_fifo)) __mxser_start_tx(info);}
static void mxser_set_termios(struct tty_struct *tty, const struct ktermios *old_termios){ struct mxser_port *info = tty->driver_data;
scoped_guard(spinlock_irqsave, &info->slock) mxser_change_speed(tty, old_termios);
if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty)) { tty->hw_stopped = false; mxser_start(tty); }
/* Handle sw stopped */ if ((old_termios->c_iflag & IXON) && !I_IXON(tty)) { tty->flow.stopped = 0;
if (info->board->must_hwid) { guard(spinlock_irqsave)(&info->slock); mxser_must_set_rx_sw_flow_control(info->ioaddr, false); }
mxser_start(tty); }}
static bool mxser_tx_empty(struct mxser_port *info){ guard(spinlock_irqsave)(&info->slock); return !(inb(info->ioaddr + UART_LSR) & UART_LSR_TEMT);}
/* * mxser_wait_until_sent() --- wait until the transmitter is empty */static void mxser_wait_until_sent(struct tty_struct *tty, int timeout){ struct mxser_port *info = tty->driver_data; unsigned long expire, char_time;
if (info->type == PORT_UNKNOWN) return;
if (info->xmit_fifo_size == 0) return; /* Just in case.... */
/* * Set the check interval to be 1/5 of the estimated time to * send a single character, and make it at least 1. The check * interval should also be less than the timeout. * * Note: we have to use pretty tight timings here to satisfy * the NIST-PCTS. */ char_time = (info->timeout - HZ / 50) / info->xmit_fifo_size; char_time = char_time / 5; if (char_time == 0) char_time = 1; if (timeout && timeout < char_time) char_time = timeout;
char_time = jiffies_to_msecs(char_time);
/* * If the transmitter hasn't cleared in twice the approximate * amount of time to send the entire FIFO, it probably won't * ever clear. This assumes the UART isn't doing flow * control, which is currently the case. Hence, if it ever * takes longer than info->timeout, this is probably due to a * UART bug of some kind. So, we clamp the timeout parameter at * 2*info->timeout. */ if (!timeout || timeout > 2 * info->timeout) timeout = 2 * info->timeout;
expire = jiffies + timeout;
while (mxser_tx_empty(info)) { msleep_interruptible(char_time); if (signal_pending(current)) break; if (time_after(jiffies, expire)) break; }}
/* * This routine is called by tty_hangup() when a hangup is signaled. */static void mxser_hangup(struct tty_struct *tty){ struct mxser_port *info = tty->driver_data;
mxser_flush_buffer(tty); tty_port_hangup(&info->port);}
/* * mxser_rs_break() --- routine which turns the break handling on or off */static int mxser_rs_break(struct tty_struct *tty, int break_state){ struct mxser_port *info = tty->driver_data; u8 lcr;
guard(spinlock_irqsave)(&info->slock); lcr = inb(info->ioaddr + UART_LCR); if (break_state == -1) lcr |= UART_LCR_SBC; else lcr &= ~UART_LCR_SBC; outb(lcr, info->ioaddr + UART_LCR);
return 0;}
static bool mxser_receive_chars_new(struct mxser_port *port, u8 status){ enum mxser_must_hwid hwid = port->board->must_hwid; u8 gdl;
if (hwid == MOXA_OTHER_UART) return false; if (status & (UART_LSR_BRK_ERROR_BITS | MOXA_MUST_LSR_RERR)) return false;
gdl = inb(port->ioaddr + MOXA_MUST_GDL_REGISTER); if (hwid == MOXA_MUST_MU150_HWID) gdl &= MOXA_MUST_GDL_MASK;
while (gdl--) { u8 ch = inb(port->ioaddr + UART_RX); if (!tty_insert_flip_char(&port->port, ch, 0)) port->icount.buf_overrun++; }
return true;}
static u8 mxser_receive_chars_old(struct tty_struct *tty, struct mxser_port *port, u8 status){ enum mxser_must_hwid hwid = port->board->must_hwid; int ignored = 0; int max = 256; u8 ch;
do { if (max-- < 0) break;
ch = inb(port->ioaddr + UART_RX); if (hwid && (status & UART_LSR_OE)) outb(port->FCR | UART_FCR_CLEAR_RCVR, port->ioaddr + UART_FCR); status &= port->read_status_mask; if (status & port->ignore_status_mask) { if (++ignored > 100) break; } else { u8 flag = 0; if (status & UART_LSR_BRK_ERROR_BITS) { if (status & UART_LSR_BI) { flag = TTY_BREAK; port->icount.brk++;
if (port->port.flags & ASYNC_SAK) do_SAK(tty); } else if (status & UART_LSR_PE) { flag = TTY_PARITY; port->icount.parity++; } else if (status & UART_LSR_FE) { flag = TTY_FRAME; port->icount.frame++; } else if (status & UART_LSR_OE) { flag = TTY_OVERRUN; port->icount.overrun++; } } if (!tty_insert_flip_char(&port->port, ch, flag)) { port->icount.buf_overrun++; break; } }
if (hwid) break;
status = inb(port->ioaddr + UART_LSR); } while (status & UART_LSR_DR);
return status;}
static u8 mxser_receive_chars(struct tty_struct *tty, struct mxser_port *port, u8 status){ if (!mxser_receive_chars_new(port, status)) status = mxser_receive_chars_old(tty, port, status);
tty_flip_buffer_push(&port->port);
return status;}
static void mxser_transmit_chars(struct tty_struct *tty, struct mxser_port *port){ int count;
if (port->x_char) { outb(port->x_char, port->ioaddr + UART_TX); port->x_char = 0; port->icount.tx++; return; }
if (kfifo_is_empty(&port->port.xmit_fifo) || tty->flow.stopped || (tty->hw_stopped && !mxser_16550A_or_MUST(port))) { __mxser_stop_tx(port); return; }
count = port->xmit_fifo_size; do { u8 c;
if (!kfifo_get(&port->port.xmit_fifo, &c)) break;
outb(c, port->ioaddr + UART_TX); port->icount.tx++; } while (--count > 0);
if (kfifo_len(&port->port.xmit_fifo) < WAKEUP_CHARS) tty_wakeup(tty);
if (kfifo_is_empty(&port->port.xmit_fifo)) __mxser_stop_tx(port);}
static bool mxser_port_isr(struct mxser_port *port){ u8 iir, status;
iir = inb(port->ioaddr + UART_IIR); if (iir & UART_IIR_NO_INT) return true;
iir &= MOXA_MUST_IIR_MASK;
scoped_guard(tty_port_tty, &port->port) { struct tty_struct *tty = scoped_tty();
status = inb(port->ioaddr + UART_LSR);
if (port->board->must_hwid) { if (iir == MOXA_MUST_IIR_GDA || iir == MOXA_MUST_IIR_RDA || iir == MOXA_MUST_IIR_RTO || iir == MOXA_MUST_IIR_LSR) status = mxser_receive_chars(tty, port, status); } else { status &= port->read_status_mask; if (status & UART_LSR_DR) status = mxser_receive_chars(tty, port, status); }
mxser_check_modem_status(tty, port);
if (port->board->must_hwid) { if (iir == 0x02 && (status & UART_LSR_THRE)) mxser_transmit_chars(tty, port); } else { if (status & UART_LSR_THRE) mxser_transmit_chars(tty, port); }
return false; }
status = inb(port->ioaddr + UART_LSR); outb(port->FCR | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, port->ioaddr + UART_FCR); inb(port->ioaddr + UART_MSR);
return true;}
/* * This is the serial driver's generic interrupt routine */static irqreturn_t mxser_interrupt(int irq, void *dev_id){ struct mxser_board *brd = dev_id; struct mxser_port *port; unsigned int int_cnt, pass_counter = 0; unsigned int i, max = brd->nports; int handled = IRQ_NONE; u8 irqbits, bits, mask = BIT(max) - 1;
while (pass_counter++ < MXSER_ISR_PASS_LIMIT) { irqbits = inb(brd->vector) & mask; if (irqbits == mask) break;
handled = IRQ_HANDLED; for (i = 0, bits = 1; i < max; i++, irqbits |= bits, bits <<= 1) { if (irqbits == mask) break; if (bits & irqbits) continue; port = &brd->ports[i];
int_cnt = 0; guard(spinlock)(&port->slock); do { if (mxser_port_isr(port)) break; } while (int_cnt++ < MXSER_ISR_PASS_LIMIT); } }
return handled;}
static const struct tty_operations mxser_ops = { .open = mxser_open, .close = mxser_close, .write = mxser_write, .put_char = mxser_put_char, .flush_chars = mxser_flush_chars, .write_room = mxser_write_room, .chars_in_buffer = mxser_chars_in_buffer, .flush_buffer = mxser_flush_buffer, .ioctl = mxser_ioctl, .throttle = mxser_throttle, .unthrottle = mxser_unthrottle, .set_termios = mxser_set_termios, .stop = mxser_stop, .start = mxser_start, .hangup = mxser_hangup, .break_ctl = mxser_rs_break, .wait_until_sent = mxser_wait_until_sent, .tiocmget = mxser_tiocmget, .tiocmset = mxser_tiocmset, .set_serial = mxser_set_serial_info, .get_serial = mxser_get_serial_info, .get_icount = mxser_get_icount,};
static const struct tty_port_operations mxser_port_ops = { .carrier_raised = mxser_carrier_raised, .dtr_rts = mxser_dtr_rts, .activate = mxser_activate, .shutdown = mxser_shutdown_port,};
/* * The MOXA Smartio/Industio serial driver boot-time initialization code! */
static void mxser_initbrd(struct mxser_board *brd, bool high_baud){ struct mxser_port *info; unsigned int i; bool is_mu860;
brd->must_hwid = mxser_must_get_hwid(brd->ports[0].ioaddr); is_mu860 = brd->must_hwid == MOXA_MUST_MU860_HWID;
for (i = 0; i < UART_INFO_NUM; i++) { if (Gpci_uart_info[i].type == brd->must_hwid) { brd->max_baud = Gpci_uart_info[i].max_baud;
/* exception....CP-102 */ if (high_baud) brd->max_baud = 921600; break; } }
if (is_mu860) { /* set to RS232 mode by default */ outb(0, brd->vector + 4); outb(0, brd->vector + 0x0c); }
for (i = 0; i < brd->nports; i++) { info = &brd->ports[i]; if (is_mu860) { if (i < 4) info->opmode_ioaddr = brd->vector + 4; else info->opmode_ioaddr = brd->vector + 0x0c; } tty_port_init(&info->port); info->port.ops = &mxser_port_ops; info->board = brd;
/* Enhance mode enabled here */ if (brd->must_hwid != MOXA_OTHER_UART) mxser_must_set_enhance_mode(info->ioaddr, true);
info->type = PORT_16550A;
mxser_process_txrx_fifo(info);
spin_lock_init(&info->slock);
/* before set INT ISR, disable all int */ outb(inb(info->ioaddr + UART_IER) & 0xf0, info->ioaddr + UART_IER); }}
static int mxser_probe(struct pci_dev *pdev, const struct pci_device_id *ent){ struct mxser_board *brd; unsigned int i, base; unsigned long ioaddress; unsigned short nports = MXSER_NPORTS(ent->driver_data); struct device *tty_dev; int retval = -EINVAL;
i = find_first_zero_bit(mxser_boards, MXSER_BOARDS); if (i >= MXSER_BOARDS) { dev_err(&pdev->dev, "too many boards found (maximum %d), board " "not configured\n", MXSER_BOARDS); goto err; }
brd = devm_kzalloc(&pdev->dev, struct_size(brd, ports, nports), GFP_KERNEL); if (!brd) goto err;
brd->idx = i; __set_bit(brd->idx, mxser_boards); base = i * MXSER_PORTS_PER_BOARD;
retval = pcim_enable_device(pdev); if (retval) { dev_err(&pdev->dev, "PCI enable failed\n"); goto err_zero; }
/* io address */ ioaddress = pci_resource_start(pdev, 2); retval = pcim_request_region(pdev, 2, "mxser(IO)"); if (retval) goto err_zero;
brd->nports = nports; for (i = 0; i < nports; i++) brd->ports[i].ioaddr = ioaddress + 8 * i;
/* vector */ ioaddress = pci_resource_start(pdev, 3); retval = pcim_request_region(pdev, 3, "mxser(vector)"); if (retval) goto err_zero; brd->vector = ioaddress;
/* irq */ brd->irq = pdev->irq;
mxser_initbrd(brd, ent->driver_data & MXSER_HIGHBAUD);
retval = devm_request_irq(&pdev->dev, brd->irq, mxser_interrupt, IRQF_SHARED, "mxser", brd); if (retval) { dev_err(&pdev->dev, "request irq failed"); goto err_relbrd; }
for (i = 0; i < nports; i++) { tty_dev = tty_port_register_device(&brd->ports[i].port, mxvar_sdriver, base + i, &pdev->dev); if (IS_ERR(tty_dev)) { retval = PTR_ERR(tty_dev); for (; i > 0; i--) tty_unregister_device(mxvar_sdriver, base + i - 1); goto err_relbrd; } }
pci_set_drvdata(pdev, brd);
return 0;err_relbrd: for (i = 0; i < nports; i++) tty_port_destroy(&brd->ports[i].port);err_zero: __clear_bit(brd->idx, mxser_boards);err: return retval;}
static void mxser_remove(struct pci_dev *pdev){ struct mxser_board *brd = pci_get_drvdata(pdev); unsigned int i, base = brd->idx * MXSER_PORTS_PER_BOARD;
for (i = 0; i < brd->nports; i++) { tty_unregister_device(mxvar_sdriver, base + i); tty_port_destroy(&brd->ports[i].port); }
__clear_bit(brd->idx, mxser_boards);}
static struct pci_driver mxser_driver = { .name = "mxser", .id_table = mxser_pcibrds, .probe = mxser_probe, .remove = mxser_remove};
static int __init mxser_module_init(void){ int retval;
mxvar_sdriver = tty_alloc_driver(MXSER_PORTS, TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV); if (IS_ERR(mxvar_sdriver)) return PTR_ERR(mxvar_sdriver);
/* Initialize the tty_driver structure */ mxvar_sdriver->name = "ttyMI"; mxvar_sdriver->major = ttymajor; mxvar_sdriver->minor_start = 0; mxvar_sdriver->type = TTY_DRIVER_TYPE_SERIAL; mxvar_sdriver->subtype = SERIAL_TYPE_NORMAL; mxvar_sdriver->init_termios = tty_std_termios; mxvar_sdriver->init_termios.c_cflag = B9600|CS8|CREAD|HUPCL|CLOCAL; tty_set_operations(mxvar_sdriver, &mxser_ops);
retval = tty_register_driver(mxvar_sdriver); if (retval) { printk(KERN_ERR "Couldn't install MOXA Smartio/Industio family " "tty driver !\n"); goto err_put; }
retval = pci_register_driver(&mxser_driver); if (retval) { printk(KERN_ERR "mxser: can't register pci driver\n"); goto err_unr; }
return 0;err_unr: tty_unregister_driver(mxvar_sdriver);err_put: tty_driver_kref_put(mxvar_sdriver); return retval;}
static void __exit mxser_module_exit(void){ pci_unregister_driver(&mxser_driver); tty_unregister_driver(mxvar_sdriver); tty_driver_kref_put(mxvar_sdriver);}
module_init(mxser_module_init);module_exit(mxser_module_exit);