Something went wrong. Try again.
(I'm so sorry!) Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel os linux
Something went wrong. Try again.
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215121612171218121912201221122212231224122512261227122812291230123112321233123412351236123712381239124012411242124312441245124612471248124912501251125212531254125512561257125812591260126112621263126412651266126712681269127012711272127312741275127612771278127912801281128212831284128512861287128812891290129112921293129412951296129712981299130013011302130313041305130613071308130913101311131213131314131513161317131813191320132113221323132413251326132713281329133013311332133313341335133613371338133913401341134213431344134513461347134813491350135113521353135413551356135713581359136013611362136313641365136613671368136913701371137213731374137513761377137813791380138113821383138413851386138713881389139013911392139313941395139613971398139914001401140214031404140514061407140814091410141114121413141414151416141714181419142014211422142314241425142614271428142914301431143214331434143514361437143814391440144114421443144414451446144714481449145014511452145314541455145614571458145914601461146214631464146514661467146814691470147114721473147414751476147714781479148014811482148314841485148614871488148914901491149214931494149514961497149814991500150115021503150415051506150715081509151015111512151315141515151615171518151915201521152215231524152515261527152815291530153115321533153415351536153715381539154015411542154315441545154615471548154915501551155215531554155515561557155815591560156115621563156415651566156715681569157015711572157315741575157615771578157915801581158215831584158515861587158815891590159115921593159415951596159715981599160016011602160316041605160616071608160916101611161216131614161516161617161816191620162116221623162416251626162716281629163016311632163316341635163616371638163916401641164216431644164516461647164816491650165116521653165416551656165716581659166016611662166316641665166616671668166916701671167216731674167516761677167816791680168116821683168416851686168716881689169016911692169316941695169616971698169917001701170217031704170517061707170817091710171117121713171417151716171717181719172017211722172317241725172617271728172917301731173217331734173517361737173817391740174117421743174417451746174717481749175017511752175317541755175617571758175917601761176217631764176517661767176817691770177117721773177417751776177717781779178017811782178317841785178617871788178917901791179217931794179517961797179817991800180118021803180418051806180718081809181018111812181318141815181618171818181918201821182218231824182518261827182818291830183118321833183418351836183718381839184018411842184318441845184618471848184918501851185218531854185518561857185818591860186118621863186418651866186718681869187018711872187318741875187618771878187918801881188218831884188518861887188818891890189118921893189418951896189718981899190019011902190319041905190619071908190919101911191219131914191519161917191819191920192119221923192419251926192719281929193019311932193319341935193619371938193919401941194219431944194519461947194819491950195119521953195419551956195719581959196019611962196319641965196619671968196919701971197219731974197519761977197819791980198119821983198419851986198719881989199019911992199319941995199619971998199920002001200220032004200520062007200820092010201120122013201420152016201720182019202020212022202320242025202620272028202920302031203220332034203520362037203820392040204120422043204420452046204720482049205020512052205320542055205620572058205920602061206220632064206520662067206820692070207120722073207420752076207720782079208020812082208320842085208620872088208920902091209220932094209520962097209820992100210121022103210421052106210721082109211021112112211321142115211621172118211921202121212221232124212521262127212821292130213121322133213421352136213721382139214021412142214321442145214621472148214921502151215221532154215521562157215821592160216121622163216421652166216721682169217021712172217321742175217621772178217921802181218221832184218521862187218821892190219121922193219421952196219721982199220022012202220322042205220622072208220922102211221222132214221522162217221822192220222122222223222422252226222722282229223022312232223322342235223622372238223922402241224222432244224522462247224822492250225122522253225422552256225722582259226022612262226322642265226622672268226922702271227222732274227522762277227822792280228122822283228422852286228722882289229022912292229322942295229622972298229923002301230223032304230523062307230823092310231123122313231423152316231723182319232023212322232323242325232623272328232923302331233223332334233523362337233823392340234123422343234423452346234723482349235023512352235323542355235623572358235923602361236223632364236523662367236823692370237123722373237423752376237723782379238023812382238323842385238623872388238923902391239223932394239523962397239823992400240124022403240424052406240724082409241024112412241324142415241624172418241924202421242224232424242524262427242824292430243124322433243424352436243724382439244024412442244324442445244624472448244924502451245224532454245524562457245824592460246124622463246424652466246724682469247024712472247324742475247624772478247924802481248224832484248524862487248824892490249124922493249424952496249724982499250025012502250325042505250625072508250925102511251225132514251525162517251825192520252125222523252425252526252725282529253025312532253325342535253625372538253925402541254225432544254525462547254825492550255125522553255425552556255725582559256025612562256325642565256625672568256925702571257225732574257525762577257825792580258125822583258425852586258725882589259025912592259325942595259625972598259926002601260226032604260526062607260826092610261126122613261426152616261726182619262026212622262326242625262626272628262926302631263226332634263526362637263826392640264126422643264426452646264726482649265026512652265326542655265626572658265926602661266226632664266526662667266826692670267126722673267426752676267726782679268026812682268326842685268626872688268926902691269226932694269526962697269826992700270127022703270427052706270727082709271027112712271327142715271627172718271927202721272227232724272527262727272827292730273127322733273427352736273727382739274027412742274327442745274627472748274927502751275227532754275527562757275827592760276127622763276427652766276727682769277027712772277327742775277627772778277927802781278227832784278527862787278827892790279127922793279427952796279727982799280028012802280328042805280628072808280928102811281228132814281528162817281828192820282128222823282428252826282728282829283028312832283328342835283628372838283928402841284228432844284528462847284828492850285128522853285428552856285728582859286028612862286328642865286628672868286928702871287228732874287528762877287828792880288128822883288428852886288728882889289028912892289328942895289628972898289929002901290229032904290529062907290829092910291129122913291429152916291729182919292029212922292329242925292629272928292929302931293229332934293529362937293829392940294129422943294429452946294729482949295029512952295329542955295629572958295929602961296229632964296529662967296829692970297129722973297429752976297729782979298029812982298329842985298629872988298929902991299229932994299529962997299829993000300130023003300430053006300730083009301030113012301330143015301630173018301930203021302230233024302530263027302830293030303130323033303430353036303730383039304030413042304330443045304630473048304930503051305230533054305530563057305830593060306130623063306430653066306730683069307030713072307330743075307630773078307930803081308230833084308530863087308830893090309130923093309430953096309730983099310031013102310331043105310631073108310931103111311231133114311531163117311831193120312131223123// SPDX-License-Identifier: GPL-2.0-only/* * Generic OPP Interface * * Copyright (C) 2009-2010 Texas Instruments Incorporated. * Nishanth Menon * Romit Dasgupta * Kevin Hilman */
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/clk.h>#include <linux/errno.h>#include <linux/err.h>#include <linux/device.h>#include <linux/export.h>#include <linux/pm_domain.h>#include <linux/regulator/consumer.h>#include <linux/slab.h>#include <linux/xarray.h>
#include "opp.h"
/* * The root of the list of all opp-tables. All opp_table structures branch off * from here, with each opp_table containing the list of opps it supports in * various states of availability. */LIST_HEAD(opp_tables);
/* Lock to allow exclusive modification to the device and opp lists */DEFINE_MUTEX(opp_table_lock);/* Flag indicating that opp_tables list is being updated at the moment */static bool opp_tables_busy;
/* OPP ID allocator */static DEFINE_XARRAY_ALLOC1(opp_configs);
static bool _find_opp_dev(const struct device *dev, struct opp_table *opp_table){ struct opp_device *opp_dev;
guard(mutex)(&opp_table->lock);
list_for_each_entry(opp_dev, &opp_table->dev_list, node) if (opp_dev->dev == dev) return true;
return false;}
static struct opp_table *_find_opp_table_unlocked(struct device *dev){ struct opp_table *opp_table;
list_for_each_entry(opp_table, &opp_tables, node) { if (_find_opp_dev(dev, opp_table)) return dev_pm_opp_get_opp_table_ref(opp_table); }
return ERR_PTR(-ENODEV);}
/** * _find_opp_table() - find opp_table struct using device pointer * @dev: device pointer used to lookup OPP table * * Search OPP table for one containing matching device. * * Return: pointer to 'struct opp_table' if found, otherwise -ENODEV or * -EINVAL based on type of error. * * The callers must call dev_pm_opp_put_opp_table() after the table is used. */struct opp_table *_find_opp_table(struct device *dev){ if (IS_ERR_OR_NULL(dev)) { pr_err("%s: Invalid parameters\n", __func__); return ERR_PTR(-EINVAL); }
guard(mutex)(&opp_table_lock); return _find_opp_table_unlocked(dev);}
/* * Returns true if multiple clocks aren't there, else returns false with WARN. * * We don't force clk_count == 1 here as there are users who don't have a clock * representation in the OPP table and manage the clock configuration themselves * in an platform specific way. */static bool assert_single_clk(struct opp_table *opp_table, unsigned int __always_unused index){ return !WARN_ON(opp_table->clk_count > 1);}
/* * Returns true if clock table is large enough to contain the clock index. */static bool assert_clk_index(struct opp_table *opp_table, unsigned int index){ return opp_table->clk_count > index;}
/* * Returns true if bandwidth table is large enough to contain the bandwidth index. */static bool assert_bandwidth_index(struct opp_table *opp_table, unsigned int index){ return opp_table->path_count > index;}
/** * dev_pm_opp_get_bw() - Gets the bandwidth corresponding to an opp * @opp: opp for which bandwidth has to be returned for * @peak: select peak or average bandwidth * @index: bandwidth index * * Return: bandwidth in kBps, else return 0 */unsigned long dev_pm_opp_get_bw(struct dev_pm_opp *opp, bool peak, int index){ if (IS_ERR_OR_NULL(opp)) { pr_err("%s: Invalid parameters\n", __func__); return 0; }
if (index >= opp->opp_table->path_count) return 0;
if (!opp->bandwidth) return 0;
return peak ? opp->bandwidth[index].peak : opp->bandwidth[index].avg;}EXPORT_SYMBOL_GPL(dev_pm_opp_get_bw);
/** * dev_pm_opp_get_voltage() - Gets the voltage corresponding to an opp * @opp: opp for which voltage has to be returned for * * Return: voltage in micro volt corresponding to the opp, else * return 0 * * This is useful only for devices with single power supply. */unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp){ if (IS_ERR_OR_NULL(opp)) { pr_err("%s: Invalid parameters\n", __func__); return 0; }
return opp->supplies[0].u_volt;}EXPORT_SYMBOL_GPL(dev_pm_opp_get_voltage);
/** * dev_pm_opp_get_supplies() - Gets the supply information corresponding to an opp * @opp: opp for which voltage has to be returned for * @supplies: Placeholder for copying the supply information. * * Return: negative error number on failure, 0 otherwise on success after * setting @supplies. * * This can be used for devices with any number of power supplies. The caller * must ensure the @supplies array must contain space for each regulator. */int dev_pm_opp_get_supplies(struct dev_pm_opp *opp, struct dev_pm_opp_supply *supplies){ if (IS_ERR_OR_NULL(opp) || !supplies) { pr_err("%s: Invalid parameters\n", __func__); return -EINVAL; }
memcpy(supplies, opp->supplies, sizeof(*supplies) * opp->opp_table->regulator_count); return 0;}EXPORT_SYMBOL_GPL(dev_pm_opp_get_supplies);
/** * dev_pm_opp_get_power() - Gets the power corresponding to an opp * @opp: opp for which power has to be returned for * * Return: power in micro watt corresponding to the opp, else * return 0 * * This is useful only for devices with single power supply. */unsigned long dev_pm_opp_get_power(struct dev_pm_opp *opp){ unsigned long opp_power = 0; int i;
if (IS_ERR_OR_NULL(opp)) { pr_err("%s: Invalid parameters\n", __func__); return 0; } for (i = 0; i < opp->opp_table->regulator_count; i++) opp_power += opp->supplies[i].u_watt;
return opp_power;}EXPORT_SYMBOL_GPL(dev_pm_opp_get_power);
/** * dev_pm_opp_get_freq_indexed() - Gets the frequency corresponding to an * available opp with specified index * @opp: opp for which frequency has to be returned for * @index: index of the frequency within the required opp * * Return: frequency in hertz corresponding to the opp with specified index, * else return 0 */unsigned long dev_pm_opp_get_freq_indexed(struct dev_pm_opp *opp, u32 index){ if (IS_ERR_OR_NULL(opp) || index >= opp->opp_table->clk_count) { pr_err("%s: Invalid parameters\n", __func__); return 0; }
return opp->rates[index];}EXPORT_SYMBOL_GPL(dev_pm_opp_get_freq_indexed);
/** * dev_pm_opp_get_level() - Gets the level corresponding to an available opp * @opp: opp for which level value has to be returned for * * Return: level read from device tree corresponding to the opp, else * return U32_MAX. */unsigned int dev_pm_opp_get_level(struct dev_pm_opp *opp){ if (IS_ERR_OR_NULL(opp) || !opp->available) { pr_err("%s: Invalid parameters\n", __func__); return U32_MAX; }
return opp->level;}EXPORT_SYMBOL_GPL(dev_pm_opp_get_level);
/** * dev_pm_opp_get_required_pstate() - Gets the required performance state * corresponding to an available opp * @opp: opp for which performance state has to be returned for * @index: index of the required opp * * Return: performance state read from device tree corresponding to the * required opp, else return U32_MAX. */unsigned int dev_pm_opp_get_required_pstate(struct dev_pm_opp *opp, unsigned int index){ if (IS_ERR_OR_NULL(opp) || !opp->available || index >= opp->opp_table->required_opp_count) { pr_err("%s: Invalid parameters\n", __func__); return 0; }
/* required-opps not fully initialized yet */ if (lazy_linking_pending(opp->opp_table)) return 0;
/* The required OPP table must belong to a genpd */ if (unlikely(!opp->opp_table->required_opp_tables[index]->is_genpd)) { pr_err("%s: Performance state is only valid for genpds.\n", __func__); return 0; }
return opp->required_opps[index]->level;}EXPORT_SYMBOL_GPL(dev_pm_opp_get_required_pstate);
/** * dev_pm_opp_is_turbo() - Returns if opp is turbo OPP or not * @opp: opp for which turbo mode is being verified * * Turbo OPPs are not for normal use, and can be enabled (under certain * conditions) for short duration of times to finish high throughput work * quickly. Running on them for longer times may overheat the chip. * * Return: true if opp is turbo opp, else false. */bool dev_pm_opp_is_turbo(struct dev_pm_opp *opp){ if (IS_ERR_OR_NULL(opp) || !opp->available) { pr_err("%s: Invalid parameters\n", __func__); return false; }
return opp->turbo;}EXPORT_SYMBOL_GPL(dev_pm_opp_is_turbo);
/** * dev_pm_opp_get_max_clock_latency() - Get max clock latency in nanoseconds * @dev: device for which we do this operation * * Return: This function returns the max clock latency in nanoseconds. */unsigned long dev_pm_opp_get_max_clock_latency(struct device *dev){ struct opp_table *opp_table __free(put_opp_table) = _find_opp_table(dev);
if (IS_ERR(opp_table)) return 0;
return opp_table->clock_latency_ns_max;}EXPORT_SYMBOL_GPL(dev_pm_opp_get_max_clock_latency);
/** * dev_pm_opp_get_max_volt_latency() - Get max voltage latency in nanoseconds * @dev: device for which we do this operation * * Return: This function returns the max voltage latency in nanoseconds. */unsigned long dev_pm_opp_get_max_volt_latency(struct device *dev){ struct dev_pm_opp *opp; struct regulator *reg; unsigned long latency_ns = 0; int ret, i, count; struct { unsigned long min; unsigned long max; } *uV;
struct opp_table *opp_table __free(put_opp_table) = _find_opp_table(dev);
if (IS_ERR(opp_table)) return 0;
/* Regulator may not be required for the device */ if (!opp_table->regulators) return 0;
count = opp_table->regulator_count;
uV = kmalloc_objs(*uV, count); if (!uV) return 0;
scoped_guard(mutex, &opp_table->lock) { for (i = 0; i < count; i++) { uV[i].min = ~0; uV[i].max = 0;
list_for_each_entry(opp, &opp_table->opp_list, node) { if (!opp->available) continue;
if (opp->supplies[i].u_volt_min < uV[i].min) uV[i].min = opp->supplies[i].u_volt_min; if (opp->supplies[i].u_volt_max > uV[i].max) uV[i].max = opp->supplies[i].u_volt_max; } } }
/* * The caller needs to ensure that opp_table (and hence the regulator) * isn't freed, while we are executing this routine. */ for (i = 0; i < count; i++) { reg = opp_table->regulators[i]; ret = regulator_set_voltage_time(reg, uV[i].min, uV[i].max); if (ret > 0) latency_ns += ret * 1000; }
kfree(uV);
return latency_ns;}EXPORT_SYMBOL_GPL(dev_pm_opp_get_max_volt_latency);
/** * dev_pm_opp_get_max_transition_latency() - Get max transition latency in * nanoseconds * @dev: device for which we do this operation * * Return: This function returns the max transition latency, in nanoseconds, to * switch from one OPP to other. */unsigned long dev_pm_opp_get_max_transition_latency(struct device *dev){ return dev_pm_opp_get_max_volt_latency(dev) + dev_pm_opp_get_max_clock_latency(dev);}EXPORT_SYMBOL_GPL(dev_pm_opp_get_max_transition_latency);
/** * dev_pm_opp_get_suspend_opp_freq() - Get frequency of suspend opp in Hz * @dev: device for which we do this operation * * Return: This function returns the frequency of the OPP marked as suspend_opp * if one is available, else returns 0; */unsigned long dev_pm_opp_get_suspend_opp_freq(struct device *dev){ unsigned long freq = 0;
struct opp_table *opp_table __free(put_opp_table) = _find_opp_table(dev);
if (IS_ERR(opp_table)) return 0;
if (opp_table->suspend_opp && opp_table->suspend_opp->available) freq = dev_pm_opp_get_freq(opp_table->suspend_opp);
return freq;}EXPORT_SYMBOL_GPL(dev_pm_opp_get_suspend_opp_freq);
int _get_opp_count(struct opp_table *opp_table){ struct dev_pm_opp *opp; int count = 0;
guard(mutex)(&opp_table->lock);
list_for_each_entry(opp, &opp_table->opp_list, node) { if (opp->available) count++; }
return count;}
/** * dev_pm_opp_get_opp_count() - Get number of opps available in the opp table * @dev: device for which we do this operation * * Return: This function returns the number of available opps if there are any, * else returns 0 if none or the corresponding error value. */int dev_pm_opp_get_opp_count(struct device *dev){ struct opp_table *opp_table __free(put_opp_table) = _find_opp_table(dev);
if (IS_ERR(opp_table)) { dev_dbg(dev, "%s: OPP table not found (%pe)\n", __func__, opp_table); return PTR_ERR(opp_table); }
return _get_opp_count(opp_table);}EXPORT_SYMBOL_GPL(dev_pm_opp_get_opp_count);
/* Helpers to read keys */static unsigned long _read_freq(struct dev_pm_opp *opp, int index){ return opp->rates[index];}
static unsigned long _read_level(struct dev_pm_opp *opp, int index){ return opp->level;}
static unsigned long _read_bw(struct dev_pm_opp *opp, int index){ return opp->bandwidth[index].peak;}
static unsigned long _read_opp_key(struct dev_pm_opp *opp, int index, struct dev_pm_opp_key *key){ key->bw = opp->bandwidth ? opp->bandwidth[index].peak : 0; key->freq = opp->rates[index]; key->level = opp->level;
return true;}
/* Generic comparison helpers */static bool _compare_exact(struct dev_pm_opp **opp, struct dev_pm_opp *temp_opp, unsigned long opp_key, unsigned long key){ if (opp_key == key) { *opp = temp_opp; return true; }
return false;}
static bool _compare_ceil(struct dev_pm_opp **opp, struct dev_pm_opp *temp_opp, unsigned long opp_key, unsigned long key){ if (opp_key >= key) { *opp = temp_opp; return true; }
return false;}
static bool _compare_floor(struct dev_pm_opp **opp, struct dev_pm_opp *temp_opp, unsigned long opp_key, unsigned long key){ if (opp_key > key) return true;
*opp = temp_opp; return false;}
static bool _compare_opp_key_exact(struct dev_pm_opp **opp, struct dev_pm_opp *temp_opp, struct dev_pm_opp_key *opp_key, struct dev_pm_opp_key *key){ bool level_match = (key->level == OPP_LEVEL_UNSET || opp_key->level == key->level); bool freq_match = (key->freq == 0 || opp_key->freq == key->freq); bool bw_match = (key->bw == 0 || opp_key->bw == key->bw);
if (freq_match && level_match && bw_match) { *opp = temp_opp; return true; }
return false;}
/* Generic key finding helpers */static struct dev_pm_opp *_opp_table_find_key(struct opp_table *opp_table, unsigned long *key, int index, bool available, unsigned long (*read)(struct dev_pm_opp *opp, int index), bool (*compare)(struct dev_pm_opp **opp, struct dev_pm_opp *temp_opp, unsigned long opp_key, unsigned long key), bool (*assert)(struct opp_table *opp_table, unsigned int index)){ struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE);
/* Assert that the requirement is met */ if (assert && !assert(opp_table, index)) return ERR_PTR(-EINVAL);
guard(mutex)(&opp_table->lock);
list_for_each_entry(temp_opp, &opp_table->opp_list, node) { if (temp_opp->available == available) { if (compare(&opp, temp_opp, read(temp_opp, index), *key)) break; } }
/* Increment the reference count of OPP */ if (!IS_ERR(opp)) { *key = read(opp, index); dev_pm_opp_get(opp); }
return opp;}
static struct dev_pm_opp *_opp_table_find_opp_key(struct opp_table *opp_table, struct dev_pm_opp_key *key, bool available, unsigned long (*read)(struct dev_pm_opp *opp, int index, struct dev_pm_opp_key *key), bool (*compare)(struct dev_pm_opp **opp, struct dev_pm_opp *temp_opp, struct dev_pm_opp_key *opp_key, struct dev_pm_opp_key *key), bool (*assert)(struct opp_table *opp_table, unsigned int index)){ struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE); struct dev_pm_opp_key temp_key;
/* Assert that the requirement is met */ if (!assert(opp_table, 0)) return ERR_PTR(-EINVAL);
guard(mutex)(&opp_table->lock);
list_for_each_entry(temp_opp, &opp_table->opp_list, node) { if (temp_opp->available == available) { read(temp_opp, 0, &temp_key); if (compare(&opp, temp_opp, &temp_key, key)) { /* Increment the reference count of OPP */ dev_pm_opp_get(opp); break; } } }
return opp;}
static struct dev_pm_opp *_find_key(struct device *dev, unsigned long *key, int index, bool available, unsigned long (*read)(struct dev_pm_opp *opp, int index), bool (*compare)(struct dev_pm_opp **opp, struct dev_pm_opp *temp_opp, unsigned long opp_key, unsigned long key), bool (*assert)(struct opp_table *opp_table, unsigned int index)){ struct opp_table *opp_table __free(put_opp_table) = _find_opp_table(dev);
if (IS_ERR(opp_table)) { dev_err(dev, "%s: OPP table not found (%pe)\n", __func__, opp_table); return ERR_CAST(opp_table); }
return _opp_table_find_key(opp_table, key, index, available, read, compare, assert);}
static struct dev_pm_opp *_find_key_exact(struct device *dev, unsigned long key, int index, bool available, unsigned long (*read)(struct dev_pm_opp *opp, int index), bool (*assert)(struct opp_table *opp_table, unsigned int index)){ /* * The value of key will be updated here, but will be ignored as the * caller doesn't need it. */ return _find_key(dev, &key, index, available, read, _compare_exact, assert);}
static struct dev_pm_opp *_opp_table_find_key_ceil(struct opp_table *opp_table, unsigned long *key, int index, bool available, unsigned long (*read)(struct dev_pm_opp *opp, int index), bool (*assert)(struct opp_table *opp_table, unsigned int index)){ return _opp_table_find_key(opp_table, key, index, available, read, _compare_ceil, assert);}
static struct dev_pm_opp *_find_key_ceil(struct device *dev, unsigned long *key, int index, bool available, unsigned long (*read)(struct dev_pm_opp *opp, int index), bool (*assert)(struct opp_table *opp_table, unsigned int index)){ return _find_key(dev, key, index, available, read, _compare_ceil, assert);}
static struct dev_pm_opp *_find_key_floor(struct device *dev, unsigned long *key, int index, bool available, unsigned long (*read)(struct dev_pm_opp *opp, int index), bool (*assert)(struct opp_table *opp_table, unsigned int index)){ return _find_key(dev, key, index, available, read, _compare_floor, assert);}
/** * dev_pm_opp_find_freq_exact() - search for an exact frequency * @dev: device for which we do this operation * @freq: frequency to search for * @available: true/false - match for available opp * * Return: Searches for exact match in the opp table and returns pointer to the * matching opp if found, else returns ERR_PTR in case of error and should * be handled using IS_ERR. Error return values can be: * EINVAL: for bad pointer * ERANGE: no match found for search * ENODEV: if device not found in list of registered devices * * Note: available is a modifier for the search. if available=true, then the * match is for exact matching frequency and is available in the stored OPP * table. if false, the match is for exact frequency which is not available. * * This provides a mechanism to enable an opp which is not available currently * or the opposite as well. * * The callers are required to call dev_pm_opp_put() for the returned OPP after * use. */struct dev_pm_opp *dev_pm_opp_find_freq_exact(struct device *dev, unsigned long freq, bool available){ return _find_key_exact(dev, freq, 0, available, _read_freq, assert_single_clk);}EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_exact);
/** * dev_pm_opp_find_key_exact() - Search for an OPP with exact key set * @dev: Device for which the OPP is being searched * @key: OPP key set to match * @available: true/false - match for available OPP * * Search for an exact match of the key set in the OPP table. * * Return: A matching opp on success, else ERR_PTR in case of error. * Possible error values: * EINVAL: for bad pointers * ERANGE: no match found for search * ENODEV: if device not found in list of registered devices * * Note: 'available' is a modifier for the search. If 'available' == true, * then the match is for exact matching key and is available in the stored * OPP table. If false, the match is for exact key which is not available. * * This provides a mechanism to enable an OPP which is not available currently * or the opposite as well. * * The callers are required to call dev_pm_opp_put() for the returned OPP after * use. */struct dev_pm_opp *dev_pm_opp_find_key_exact(struct device *dev, struct dev_pm_opp_key *key, bool available){ struct opp_table *opp_table __free(put_opp_table) = _find_opp_table(dev);
if (IS_ERR(opp_table)) { dev_err(dev, "%s: OPP table not found (%pe)\n", __func__, opp_table); return ERR_CAST(opp_table); }
return _opp_table_find_opp_key(opp_table, key, available, _read_opp_key, _compare_opp_key_exact, assert_single_clk);}EXPORT_SYMBOL_GPL(dev_pm_opp_find_key_exact);
/** * dev_pm_opp_find_freq_exact_indexed() - Search for an exact freq for the * clock corresponding to the index * @dev: Device for which we do this operation * @freq: frequency to search for * @index: Clock index * @available: true/false - match for available opp * * Search for the matching exact OPP for the clock corresponding to the * specified index from a starting freq for a device. * * Return: matching *opp , else returns ERR_PTR in case of error and should be * handled using IS_ERR. Error return values can be: * EINVAL: for bad pointer * ERANGE: no match found for search * ENODEV: if device not found in list of registered devices * * The callers are required to call dev_pm_opp_put() for the returned OPP after * use. */struct dev_pm_opp *dev_pm_opp_find_freq_exact_indexed(struct device *dev, unsigned long freq, u32 index, bool available){ return _find_key_exact(dev, freq, index, available, _read_freq, assert_clk_index);}EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_exact_indexed);
static noinline struct dev_pm_opp *_find_freq_ceil(struct opp_table *opp_table, unsigned long *freq){ return _opp_table_find_key_ceil(opp_table, freq, 0, true, _read_freq, assert_single_clk);}
/** * dev_pm_opp_find_freq_ceil() - Search for an rounded ceil freq * @dev: device for which we do this operation * @freq: Start frequency * * Search for the matching ceil *available* OPP from a starting freq * for a device. * * Return: matching *opp and refreshes *freq accordingly, else returns * ERR_PTR in case of error and should be handled using IS_ERR. Error return * values can be: * EINVAL: for bad pointer * ERANGE: no match found for search * ENODEV: if device not found in list of registered devices * * The callers are required to call dev_pm_opp_put() for the returned OPP after * use. */struct dev_pm_opp *dev_pm_opp_find_freq_ceil(struct device *dev, unsigned long *freq){ return _find_key_ceil(dev, freq, 0, true, _read_freq, assert_single_clk);}EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_ceil);
/** * dev_pm_opp_find_freq_ceil_indexed() - Search for a rounded ceil freq for the * clock corresponding to the index * @dev: Device for which we do this operation * @freq: Start frequency * @index: Clock index * * Search for the matching ceil *available* OPP for the clock corresponding to * the specified index from a starting freq for a device. * * Return: matching *opp and refreshes *freq accordingly, else returns * ERR_PTR in case of error and should be handled using IS_ERR. Error return * values can be: * EINVAL: for bad pointer * ERANGE: no match found for search * ENODEV: if device not found in list of registered devices * * The callers are required to call dev_pm_opp_put() for the returned OPP after * use. */struct dev_pm_opp *dev_pm_opp_find_freq_ceil_indexed(struct device *dev, unsigned long *freq, u32 index){ return _find_key_ceil(dev, freq, index, true, _read_freq, assert_clk_index);}EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_ceil_indexed);
/** * dev_pm_opp_find_freq_floor() - Search for a rounded floor freq * @dev: device for which we do this operation * @freq: Start frequency * * Search for the matching floor *available* OPP from a starting freq * for a device. * * Return: matching *opp and refreshes *freq accordingly, else returns * ERR_PTR in case of error and should be handled using IS_ERR. Error return * values can be: * EINVAL: for bad pointer * ERANGE: no match found for search * ENODEV: if device not found in list of registered devices * * The callers are required to call dev_pm_opp_put() for the returned OPP after * use. */struct dev_pm_opp *dev_pm_opp_find_freq_floor(struct device *dev, unsigned long *freq){ return _find_key_floor(dev, freq, 0, true, _read_freq, assert_single_clk);}EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_floor);
/** * dev_pm_opp_find_freq_floor_indexed() - Search for a rounded floor freq for the * clock corresponding to the index * @dev: Device for which we do this operation * @freq: Start frequency * @index: Clock index * * Search for the matching floor *available* OPP for the clock corresponding to * the specified index from a starting freq for a device. * * Return: matching *opp and refreshes *freq accordingly, else returns * ERR_PTR in case of error and should be handled using IS_ERR. Error return * values can be: * EINVAL: for bad pointer * ERANGE: no match found for search * ENODEV: if device not found in list of registered devices * * The callers are required to call dev_pm_opp_put() for the returned OPP after * use. */struct dev_pm_opp *dev_pm_opp_find_freq_floor_indexed(struct device *dev, unsigned long *freq, u32 index){ return _find_key_floor(dev, freq, index, true, _read_freq, assert_clk_index);}EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_floor_indexed);
/** * dev_pm_opp_find_level_exact() - search for an exact level * @dev: device for which we do this operation * @level: level to search for * * Return: Searches for exact match in the opp table and returns pointer to the * matching opp if found, else returns ERR_PTR in case of error and should * be handled using IS_ERR. Error return values can be: * EINVAL: for bad pointer * ERANGE: no match found for search * ENODEV: if device not found in list of registered devices * * The callers are required to call dev_pm_opp_put() for the returned OPP after * use. */struct dev_pm_opp *dev_pm_opp_find_level_exact(struct device *dev, unsigned int level){ return _find_key_exact(dev, level, 0, true, _read_level, NULL);}EXPORT_SYMBOL_GPL(dev_pm_opp_find_level_exact);
/** * dev_pm_opp_find_level_ceil() - search for an rounded up level * @dev: device for which we do this operation * @level: level to search for * * Return: Searches for rounded up match in the opp table and returns pointer * to the matching opp if found, else returns ERR_PTR in case of error and * should be handled using IS_ERR. Error return values can be: * EINVAL: for bad pointer * ERANGE: no match found for search * ENODEV: if device not found in list of registered devices * * The callers are required to call dev_pm_opp_put() for the returned OPP after * use. */struct dev_pm_opp *dev_pm_opp_find_level_ceil(struct device *dev, unsigned int *level){ unsigned long temp = *level; struct dev_pm_opp *opp;
opp = _find_key_ceil(dev, &temp, 0, true, _read_level, NULL); if (IS_ERR(opp)) return opp;
/* False match */ if (temp == OPP_LEVEL_UNSET) { dev_err(dev, "%s: OPP levels aren't available\n", __func__); dev_pm_opp_put(opp); return ERR_PTR(-ENODEV); }
*level = temp; return opp;}EXPORT_SYMBOL_GPL(dev_pm_opp_find_level_ceil);
/** * dev_pm_opp_find_level_floor() - Search for a rounded floor level * @dev: device for which we do this operation * @level: Start level * * Search for the matching floor *available* OPP from a starting level * for a device. * * Return: matching *opp and refreshes *level accordingly, else returns * ERR_PTR in case of error and should be handled using IS_ERR. Error return * values can be: * EINVAL: for bad pointer * ERANGE: no match found for search * ENODEV: if device not found in list of registered devices * * The callers are required to call dev_pm_opp_put() for the returned OPP after * use. */struct dev_pm_opp *dev_pm_opp_find_level_floor(struct device *dev, unsigned int *level){ unsigned long temp = *level; struct dev_pm_opp *opp;
opp = _find_key_floor(dev, &temp, 0, true, _read_level, NULL); *level = temp; return opp;}EXPORT_SYMBOL_GPL(dev_pm_opp_find_level_floor);
/** * dev_pm_opp_find_bw_ceil() - Search for a rounded ceil bandwidth * @dev: device for which we do this operation * @bw: start bandwidth * @index: which bandwidth to compare, in case of OPPs with several values * * Search for the matching floor *available* OPP from a starting bandwidth * for a device. * * Return: matching *opp and refreshes *bw accordingly, else returns * ERR_PTR in case of error and should be handled using IS_ERR. Error return * values can be: * EINVAL: for bad pointer * ERANGE: no match found for search * ENODEV: if device not found in list of registered devices * * The callers are required to call dev_pm_opp_put() for the returned OPP after * use. */struct dev_pm_opp *dev_pm_opp_find_bw_ceil(struct device *dev, unsigned int *bw, int index){ unsigned long temp = *bw; struct dev_pm_opp *opp;
opp = _find_key_ceil(dev, &temp, index, true, _read_bw, assert_bandwidth_index); *bw = temp; return opp;}EXPORT_SYMBOL_GPL(dev_pm_opp_find_bw_ceil);
/** * dev_pm_opp_find_bw_floor() - Search for a rounded floor bandwidth * @dev: device for which we do this operation * @bw: start bandwidth * @index: which bandwidth to compare, in case of OPPs with several values * * Search for the matching floor *available* OPP from a starting bandwidth * for a device. * * Return: matching *opp and refreshes *bw accordingly, else returns * ERR_PTR in case of error and should be handled using IS_ERR. Error return * values can be: * EINVAL: for bad pointer * ERANGE: no match found for search * ENODEV: if device not found in list of registered devices * * The callers are required to call dev_pm_opp_put() for the returned OPP after * use. */struct dev_pm_opp *dev_pm_opp_find_bw_floor(struct device *dev, unsigned int *bw, int index){ unsigned long temp = *bw; struct dev_pm_opp *opp;
opp = _find_key_floor(dev, &temp, index, true, _read_bw, assert_bandwidth_index); *bw = temp; return opp;}EXPORT_SYMBOL_GPL(dev_pm_opp_find_bw_floor);
static int _set_opp_voltage(struct device *dev, struct regulator *reg, struct dev_pm_opp_supply *supply){ int ret;
/* Regulator not available for device */ if (IS_ERR(reg)) { dev_dbg(dev, "%s: regulator not available: %pe\n", __func__, reg); return 0; }
dev_dbg(dev, "%s: voltages (mV): %lu %lu %lu\n", __func__, supply->u_volt_min, supply->u_volt, supply->u_volt_max);
ret = regulator_set_voltage_triplet(reg, supply->u_volt_min, supply->u_volt, supply->u_volt_max); if (ret) dev_err(dev, "%s: failed to set voltage (%lu %lu %lu mV): %d\n", __func__, supply->u_volt_min, supply->u_volt, supply->u_volt_max, ret);
return ret;}
static int_opp_config_clk_single(struct device *dev, struct opp_table *opp_table, struct dev_pm_opp *opp, void *data, bool scaling_down){ unsigned long *target = data; unsigned long freq; int ret;
/* One of target and opp must be available */ if (target) { freq = *target; } else if (opp) { freq = opp->rates[0]; } else { WARN_ON(1); return -EINVAL; }
ret = clk_set_rate(opp_table->clk, freq); if (ret) { dev_err(dev, "%s: failed to set clock rate: %d\n", __func__, ret); } else { opp_table->current_rate_single_clk = freq; }
return ret;}
/* * Simple implementation for configuring multiple clocks. Configure clocks in * the order in which they are present in the array while scaling up. */int dev_pm_opp_config_clks_simple(struct device *dev, struct opp_table *opp_table, struct dev_pm_opp *opp, void *data, bool scaling_down){ int ret, i;
if (scaling_down) { for (i = opp_table->clk_count - 1; i >= 0; i--) { ret = clk_set_rate(opp_table->clks[i], opp->rates[i]); if (ret) { dev_err(dev, "%s: failed to set clock rate: %d\n", __func__, ret); return ret; } } } else { for (i = 0; i < opp_table->clk_count; i++) { ret = clk_set_rate(opp_table->clks[i], opp->rates[i]); if (ret) { dev_err(dev, "%s: failed to set clock rate: %d\n", __func__, ret); return ret; } } }
return 0;}EXPORT_SYMBOL_GPL(dev_pm_opp_config_clks_simple);
static int _opp_config_regulator_single(struct device *dev, struct dev_pm_opp *old_opp, struct dev_pm_opp *new_opp, struct regulator **regulators, unsigned int count){ struct regulator *reg = regulators[0]; int ret;
/* This function only supports single regulator per device */ if (WARN_ON(count > 1)) { dev_err(dev, "multiple regulators are not supported\n"); return -EINVAL; }
ret = _set_opp_voltage(dev, reg, new_opp->supplies); if (ret) return ret;
/* * Enable the regulator after setting its voltages, otherwise it breaks * some boot-enabled regulators. */ if (unlikely(!new_opp->opp_table->enabled)) { ret = regulator_enable(reg); if (ret < 0) dev_warn(dev, "Failed to enable regulator: %d", ret); }
return 0;}
static int _set_opp_bw(const struct opp_table *opp_table, struct dev_pm_opp *opp, struct device *dev){ u32 avg, peak; int i, ret;
if (!opp_table->paths) return 0;
for (i = 0; i < opp_table->path_count; i++) { if (!opp) { avg = 0; peak = 0; } else { avg = opp->bandwidth[i].avg; peak = opp->bandwidth[i].peak; } ret = icc_set_bw(opp_table->paths[i], avg, peak); if (ret) { dev_err(dev, "Failed to %s bandwidth[%d]: %d\n", opp ? "set" : "remove", i, ret); return ret; } }
return 0;}
static int _set_opp_level(struct device *dev, struct dev_pm_opp *opp){ unsigned int level = 0; int ret = 0;
if (opp) { if (opp->level == OPP_LEVEL_UNSET) return 0;
level = opp->level; }
/* Request a new performance state through the device's PM domain. */ ret = dev_pm_domain_set_performance_state(dev, level); if (ret) dev_err(dev, "Failed to set performance state %u (%d)\n", level, ret);
return ret;}
/* This is only called for PM domain for now */static int _set_required_opps(struct device *dev, struct opp_table *opp_table, struct dev_pm_opp *opp, bool up){ struct device **devs = opp_table->required_devs; struct dev_pm_opp *required_opp; int index, target, delta, ret;
if (!devs) return 0;
/* required-opps not fully initialized yet */ if (lazy_linking_pending(opp_table)) return -EBUSY;
/* Scaling up? Set required OPPs in normal order, else reverse */ if (up) { index = 0; target = opp_table->required_opp_count; delta = 1; } else { index = opp_table->required_opp_count - 1; target = -1; delta = -1; }
while (index != target) { if (devs[index]) { required_opp = opp ? opp->required_opps[index] : NULL;
ret = _set_opp_level(devs[index], required_opp); if (ret) return ret; }
index += delta; }
return 0;}
static void _find_current_opp(struct device *dev, struct opp_table *opp_table){ struct dev_pm_opp *opp = ERR_PTR(-ENODEV); unsigned long freq;
if (!IS_ERR(opp_table->clk)) { freq = clk_get_rate(opp_table->clk); opp = _find_freq_ceil(opp_table, &freq); }
/* * Unable to find the current OPP ? Pick the first from the list since * it is in ascending order, otherwise rest of the code will need to * make special checks to validate current_opp. */ if (IS_ERR(opp)) { guard(mutex)(&opp_table->lock); opp = dev_pm_opp_get(list_first_entry(&opp_table->opp_list, struct dev_pm_opp, node)); }
opp_table->current_opp = opp;}
static int _disable_opp_table(struct device *dev, struct opp_table *opp_table){ int ret;
if (!opp_table->enabled) return 0;
/* * Some drivers need to support cases where some platforms may * have OPP table for the device, while others don't and * opp_set_rate() just needs to behave like clk_set_rate(). */ if (!_get_opp_count(opp_table)) return 0;
ret = _set_opp_bw(opp_table, NULL, dev); if (ret) return ret;
if (opp_table->regulators) regulator_disable(opp_table->regulators[0]);
ret = _set_opp_level(dev, NULL); if (ret) goto out;
ret = _set_required_opps(dev, opp_table, NULL, false);
out: opp_table->enabled = false; return ret;}
static int _set_opp(struct device *dev, struct opp_table *opp_table, struct dev_pm_opp *opp, void *clk_data, bool forced){ struct dev_pm_opp *old_opp; int scaling_down, ret;
if (unlikely(!opp)) return _disable_opp_table(dev, opp_table);
/* Find the currently set OPP if we don't know already */ if (unlikely(!opp_table->current_opp)) _find_current_opp(dev, opp_table);
old_opp = opp_table->current_opp;
/* Return early if nothing to do */ if (!forced && old_opp == opp && opp_table->enabled) { dev_dbg_ratelimited(dev, "%s: OPPs are same, nothing to do\n", __func__); return 0; }
dev_dbg(dev, "%s: switching OPP: Freq %lu -> %lu Hz, Level %u -> %u, Bw %u -> %u\n", __func__, old_opp->rates[0], opp->rates[0], old_opp->level, opp->level, old_opp->bandwidth ? old_opp->bandwidth[0].peak : 0, opp->bandwidth ? opp->bandwidth[0].peak : 0);
scaling_down = _opp_compare_key(opp_table, old_opp, opp); if (scaling_down == -1) scaling_down = 0;
/* Scaling up? Configure required OPPs before frequency */ if (!scaling_down) { ret = _set_required_opps(dev, opp_table, opp, true); if (ret) { dev_err(dev, "Failed to set required opps: %d\n", ret); return ret; }
ret = _set_opp_level(dev, opp); if (ret) return ret;
ret = _set_opp_bw(opp_table, opp, dev); if (ret) { dev_err(dev, "Failed to set bw: %d\n", ret); return ret; }
if (opp_table->config_regulators) { ret = opp_table->config_regulators(dev, old_opp, opp, opp_table->regulators, opp_table->regulator_count); if (ret) { dev_err(dev, "Failed to set regulator voltages: %d\n", ret); return ret; } } }
if (opp_table->config_clks) { ret = opp_table->config_clks(dev, opp_table, opp, clk_data, scaling_down); if (ret) return ret; }
/* Scaling down? Configure required OPPs after frequency */ if (scaling_down) { if (opp_table->config_regulators) { ret = opp_table->config_regulators(dev, old_opp, opp, opp_table->regulators, opp_table->regulator_count); if (ret) { dev_err(dev, "Failed to set regulator voltages: %d\n", ret); return ret; } }
ret = _set_opp_bw(opp_table, opp, dev); if (ret) { dev_err(dev, "Failed to set bw: %d\n", ret); return ret; }
ret = _set_opp_level(dev, opp); if (ret) return ret;
ret = _set_required_opps(dev, opp_table, opp, false); if (ret) { dev_err(dev, "Failed to set required opps: %d\n", ret); return ret; } }
opp_table->enabled = true; dev_pm_opp_put(old_opp);
/* Make sure current_opp doesn't get freed */ opp_table->current_opp = dev_pm_opp_get(opp);
return ret;}
/** * dev_pm_opp_set_rate() - Configure new OPP based on frequency * @dev: device for which we do this operation * @target_freq: frequency to achieve * * This configures the power-supplies to the levels specified by the OPP * corresponding to the target_freq, and programs the clock to a value <= * target_freq, as rounded by clk_round_rate(). Device wanting to run at fmax * provided by the opp, should have already rounded to the target OPP's * frequency. */int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq){ struct opp_table *opp_table __free(put_opp_table) = _find_opp_table(dev); struct dev_pm_opp *opp __free(put_opp) = NULL; unsigned long freq = 0, temp_freq; bool forced = false;
if (IS_ERR(opp_table)) { dev_err(dev, "%s: device's opp table doesn't exist\n", __func__); return PTR_ERR(opp_table); }
if (target_freq) { /* * For IO devices which require an OPP on some platforms/SoCs * while just needing to scale the clock on some others * we look for empty OPP tables with just a clock handle and * scale only the clk. This makes dev_pm_opp_set_rate() * equivalent to a clk_set_rate() */ if (!_get_opp_count(opp_table)) { return opp_table->config_clks(dev, opp_table, NULL, &target_freq, false); }
freq = clk_round_rate(opp_table->clk, target_freq); if ((long)freq <= 0) freq = target_freq;
/* * The clock driver may support finer resolution of the * frequencies than the OPP table, don't update the frequency we * pass to clk_set_rate() here. */ temp_freq = freq; opp = _find_freq_ceil(opp_table, &temp_freq); if (IS_ERR(opp)) { dev_err(dev, "%s: failed to find OPP for freq %lu (%pe)\n", __func__, freq, opp); return PTR_ERR(opp); }
/* * An OPP entry specifies the highest frequency at which other * properties of the OPP entry apply. Even if the new OPP is * same as the old one, we may still reach here for a different * value of the frequency. In such a case, do not abort but * configure the hardware to the desired frequency forcefully. */ forced = opp_table->current_rate_single_clk != freq; }
return _set_opp(dev, opp_table, opp, &freq, forced);}EXPORT_SYMBOL_GPL(dev_pm_opp_set_rate);
/** * dev_pm_opp_set_opp() - Configure device for OPP * @dev: device for which we do this operation * @opp: OPP to set to * * This configures the device based on the properties of the OPP passed to this * routine. * * Return: 0 on success, a negative error number otherwise. */int dev_pm_opp_set_opp(struct device *dev, struct dev_pm_opp *opp){ struct opp_table *opp_table __free(put_opp_table) = _find_opp_table(dev);
if (IS_ERR(opp_table)) { dev_err(dev, "%s: device opp doesn't exist\n", __func__); return PTR_ERR(opp_table); }
return _set_opp(dev, opp_table, opp, NULL, false);}EXPORT_SYMBOL_GPL(dev_pm_opp_set_opp);
/* OPP-dev Helpers */static void _remove_opp_dev(struct opp_device *opp_dev, struct opp_table *opp_table){ opp_debug_unregister(opp_dev, opp_table); list_del(&opp_dev->node); kfree(opp_dev);}
struct opp_device *_add_opp_dev(const struct device *dev, struct opp_table *opp_table){ struct opp_device *opp_dev;
opp_dev = kzalloc_obj(*opp_dev); if (!opp_dev) return NULL;
/* Initialize opp-dev */ opp_dev->dev = dev;
scoped_guard(mutex, &opp_table->lock) list_add(&opp_dev->node, &opp_table->dev_list);
/* Create debugfs entries for the opp_table */ opp_debug_register(opp_dev, opp_table);
return opp_dev;}
static struct opp_table *_allocate_opp_table(struct device *dev, int index){ struct opp_table *opp_table; struct opp_device *opp_dev; int ret;
/* * Allocate a new OPP table. In the infrequent case where a new * device is needed to be added, we pay this penalty. */ opp_table = kzalloc_obj(*opp_table); if (!opp_table) return ERR_PTR(-ENOMEM);
mutex_init(&opp_table->lock); INIT_LIST_HEAD(&opp_table->dev_list); INIT_LIST_HEAD(&opp_table->lazy);
opp_table->clk = ERR_PTR(-ENODEV);
/* Mark regulator count uninitialized */ opp_table->regulator_count = -1;
opp_dev = _add_opp_dev(dev, opp_table); if (!opp_dev) { ret = -ENOMEM; goto err; }
_of_init_opp_table(opp_table, dev, index);
/* Find interconnect path(s) for the device */ ret = dev_pm_opp_of_find_icc_paths(dev, opp_table); if (ret) { if (ret == -EPROBE_DEFER) goto remove_opp_dev;
dev_warn(dev, "%s: Error finding interconnect paths: %d\n", __func__, ret); }
BLOCKING_INIT_NOTIFIER_HEAD(&opp_table->head); INIT_LIST_HEAD(&opp_table->opp_list); kref_init(&opp_table->kref);
return opp_table;
remove_opp_dev: _of_clear_opp_table(opp_table); _remove_opp_dev(opp_dev, opp_table); mutex_destroy(&opp_table->lock);err: kfree(opp_table); return ERR_PTR(ret);}
static struct opp_table *_update_opp_table_clk(struct device *dev, struct opp_table *opp_table, bool getclk){ int ret;
/* * Return early if we don't need to get clk or we have already done it * earlier. */ if (!getclk || IS_ERR(opp_table) || !IS_ERR(opp_table->clk) || opp_table->clks) return opp_table;
/* * There are few platforms which don't want the OPP core to manage * device's clock settings. In such cases neither the platform * provides the clks explicitly to us, nor the DT contains a valid * clk entry. The OPP nodes in DT may still contain "opp-hz" property * though, which we need to parse and allow the platform to find an * OPP based on freq later on. * * This is a simple solution to take care of such corner cases, i.e. * make the clk_count 1, which lets us allocate space for frequency * in opp->rates and also parse the entries in DT. Use * clk_get_optional() instead of clk_get() so opp_table->clk stays * NULL for such devices, instead of holding an ERR_PTR(-ENOENT) that * consumers must remember to special-case. */ opp_table->clk = clk_get_optional(dev, NULL);
if (IS_ERR(opp_table->clk)) { ret = dev_err_probe(dev, PTR_ERR(opp_table->clk), "Couldn't find clock\n"); dev_pm_opp_put_opp_table(opp_table); return ERR_PTR(ret); }
if (opp_table->clk) opp_table->config_clks = _opp_config_clk_single;
opp_table->clk_count = 1;
return opp_table;}
/* * We need to make sure that the OPP table for a device doesn't get added twice, * if this routine gets called in parallel with the same device pointer. * * The simplest way to enforce that is to perform everything (find existing * table and if not found, create a new one) under the opp_table_lock, so only * one creator gets access to the same. But that expands the critical section * under the lock and may end up causing circular dependencies with frameworks * like debugfs, interconnect or clock framework as they may be direct or * indirect users of OPP core. * * And for that reason we have to go for a bit tricky implementation here, which * uses the opp_tables_busy flag to indicate if another creator is in the middle * of adding an OPP table and others should wait for it to finish. */struct opp_table *_add_opp_table_indexed(struct device *dev, int index, bool getclk){ struct opp_table *opp_table;
again: mutex_lock(&opp_table_lock);
opp_table = _find_opp_table_unlocked(dev); if (!IS_ERR(opp_table)) goto unlock;
/* * The opp_tables list or an OPP table's dev_list is getting updated by * another user, wait for it to finish. */ if (unlikely(opp_tables_busy)) { mutex_unlock(&opp_table_lock); cpu_relax(); goto again; }
opp_tables_busy = true; opp_table = _managed_opp(dev, index);
/* Drop the lock to reduce the size of critical section */ mutex_unlock(&opp_table_lock);
if (opp_table) { if (!_add_opp_dev(dev, opp_table)) { dev_pm_opp_put_opp_table(opp_table); opp_table = ERR_PTR(-ENOMEM); }
mutex_lock(&opp_table_lock); } else { opp_table = _allocate_opp_table(dev, index);
mutex_lock(&opp_table_lock); if (!IS_ERR(opp_table)) list_add(&opp_table->node, &opp_tables); }
opp_tables_busy = false;
unlock: mutex_unlock(&opp_table_lock);
return _update_opp_table_clk(dev, opp_table, getclk);}
static struct opp_table *_add_opp_table(struct device *dev, bool getclk){ return _add_opp_table_indexed(dev, 0, getclk);}
struct opp_table *dev_pm_opp_get_opp_table(struct device *dev){ return _find_opp_table(dev);}EXPORT_SYMBOL_GPL(dev_pm_opp_get_opp_table);
static void _opp_table_kref_release(struct kref *kref){ struct opp_table *opp_table = container_of(kref, struct opp_table, kref); struct opp_device *opp_dev, *temp; int i;
/* Drop the lock as soon as we can */ list_del(&opp_table->node); mutex_unlock(&opp_table_lock);
if (opp_table->current_opp) dev_pm_opp_put(opp_table->current_opp);
_of_clear_opp_table(opp_table);
/* Release automatically acquired single clk */ if (!IS_ERR(opp_table->clk)) clk_put(opp_table->clk);
if (opp_table->paths) { for (i = 0; i < opp_table->path_count; i++) icc_put(opp_table->paths[i]); kfree(opp_table->paths); }
WARN_ON(!list_empty(&opp_table->opp_list));
list_for_each_entry_safe(opp_dev, temp, &opp_table->dev_list, node) _remove_opp_dev(opp_dev, opp_table);
mutex_destroy(&opp_table->lock); kfree(opp_table);}
struct opp_table *dev_pm_opp_get_opp_table_ref(struct opp_table *opp_table){ kref_get(&opp_table->kref); return opp_table;}EXPORT_SYMBOL_GPL(dev_pm_opp_get_opp_table_ref);
void dev_pm_opp_put_opp_table(struct opp_table *opp_table){ kref_put_mutex(&opp_table->kref, _opp_table_kref_release, &opp_table_lock);}EXPORT_SYMBOL_GPL(dev_pm_opp_put_opp_table);
void _opp_free(struct dev_pm_opp *opp){ kfree(opp);}
static void _opp_kref_release(struct kref *kref){ struct dev_pm_opp *opp = container_of(kref, struct dev_pm_opp, kref); struct opp_table *opp_table = opp->opp_table;
list_del(&opp->node); mutex_unlock(&opp_table->lock);
/* * Notify the changes in the availability of the operable * frequency/voltage list. */ blocking_notifier_call_chain(&opp_table->head, OPP_EVENT_REMOVE, opp); _of_clear_opp(opp_table, opp); opp_debug_remove_one(opp); kfree(opp);}
struct dev_pm_opp *dev_pm_opp_get(struct dev_pm_opp *opp){ kref_get(&opp->kref); return opp;}EXPORT_SYMBOL_GPL(dev_pm_opp_get);
void dev_pm_opp_put(struct dev_pm_opp *opp){ kref_put_mutex(&opp->kref, _opp_kref_release, &opp->opp_table->lock);}EXPORT_SYMBOL_GPL(dev_pm_opp_put);
/** * dev_pm_opp_remove() - Remove an OPP from OPP table * @dev: device for which we do this operation * @freq: OPP to remove with matching 'freq' * * This function removes an opp from the opp table. */void dev_pm_opp_remove(struct device *dev, unsigned long freq){ struct dev_pm_opp *opp = NULL, *iter;
struct opp_table *opp_table __free(put_opp_table) = _find_opp_table(dev);
if (IS_ERR(opp_table)) return;
if (!assert_single_clk(opp_table, 0)) return;
scoped_guard(mutex, &opp_table->lock) { list_for_each_entry(iter, &opp_table->opp_list, node) { if (iter->rates[0] == freq) { opp = iter; break; } } }
if (opp) { dev_pm_opp_put(opp);
/* Drop the reference taken by dev_pm_opp_add() */ dev_pm_opp_put_opp_table(opp_table); } else { dev_warn(dev, "%s: Couldn't find OPP with freq: %lu\n", __func__, freq); }}EXPORT_SYMBOL_GPL(dev_pm_opp_remove);
static struct dev_pm_opp *_opp_get_next(struct opp_table *opp_table, bool dynamic){ struct dev_pm_opp *opp;
guard(mutex)(&opp_table->lock);
list_for_each_entry(opp, &opp_table->opp_list, node) { /* * Refcount must be dropped only once for each OPP by OPP core, * do that with help of "removed" flag. */ if (!opp->removed && dynamic == opp->dynamic) return opp; }
return NULL;}
/* * Can't call dev_pm_opp_put() from under the lock as debugfs removal needs to * happen lock less to avoid circular dependency issues. This routine must be * called without the opp_table->lock held. */static void _opp_remove_all(struct opp_table *opp_table, bool dynamic){ struct dev_pm_opp *opp;
while ((opp = _opp_get_next(opp_table, dynamic))) { opp->removed = true; dev_pm_opp_put(opp);
/* Drop the references taken by dev_pm_opp_add() */ if (dynamic) dev_pm_opp_put_opp_table(opp_table); }}
bool _opp_remove_all_static(struct opp_table *opp_table){ scoped_guard(mutex, &opp_table->lock) { if (!opp_table->parsed_static_opps) return false;
if (--opp_table->parsed_static_opps) return true; }
_opp_remove_all(opp_table, false); return true;}
/** * dev_pm_opp_remove_all_dynamic() - Remove all dynamically created OPPs * @dev: device for which we do this operation * * This function removes all dynamically created OPPs from the opp table. */void dev_pm_opp_remove_all_dynamic(struct device *dev){ struct opp_table *opp_table __free(put_opp_table) = _find_opp_table(dev);
if (IS_ERR(opp_table)) return;
_opp_remove_all(opp_table, true);}EXPORT_SYMBOL_GPL(dev_pm_opp_remove_all_dynamic);
struct dev_pm_opp *_opp_allocate(struct opp_table *opp_table){ struct dev_pm_opp *opp; int supply_count, supply_size, icc_size, clk_size;
/* Allocate space for at least one supply */ supply_count = opp_table->regulator_count > 0 ? opp_table->regulator_count : 1; supply_size = sizeof(*opp->supplies) * supply_count; clk_size = sizeof(*opp->rates) * opp_table->clk_count; icc_size = sizeof(*opp->bandwidth) * opp_table->path_count;
/* allocate new OPP node and supplies structures */ opp = kzalloc(sizeof(*opp) + supply_size + clk_size + icc_size, GFP_KERNEL); if (!opp) return NULL;
/* Put the supplies, bw and clock at the end of the OPP structure */ opp->supplies = (struct dev_pm_opp_supply *)(opp + 1);
opp->rates = (unsigned long *)(opp->supplies + supply_count);
if (icc_size) opp->bandwidth = (struct dev_pm_opp_icc_bw *)(opp->rates + opp_table->clk_count);
INIT_LIST_HEAD(&opp->node);
opp->level = OPP_LEVEL_UNSET;
return opp;}
static bool _opp_supported_by_regulators(struct dev_pm_opp *opp, struct opp_table *opp_table){ struct regulator *reg; int i;
if (!opp_table->regulators) return true;
for (i = 0; i < opp_table->regulator_count; i++) { reg = opp_table->regulators[i];
if (!regulator_is_supported_voltage(reg, opp->supplies[i].u_volt_min, opp->supplies[i].u_volt_max)) { pr_warn("%s: OPP minuV: %lu maxuV: %lu, not supported by regulator\n", __func__, opp->supplies[i].u_volt_min, opp->supplies[i].u_volt_max); return false; } }
return true;}
static int _opp_compare_rate(struct opp_table *opp_table, struct dev_pm_opp *opp1, struct dev_pm_opp *opp2){ int i;
for (i = 0; i < opp_table->clk_count; i++) { if (opp1->rates[i] != opp2->rates[i]) return opp1->rates[i] < opp2->rates[i] ? -1 : 1; }
/* Same rates for both OPPs */ return 0;}
static int _opp_compare_bw(struct opp_table *opp_table, struct dev_pm_opp *opp1, struct dev_pm_opp *opp2){ int i;
for (i = 0; i < opp_table->path_count; i++) { if (opp1->bandwidth[i].peak != opp2->bandwidth[i].peak) return opp1->bandwidth[i].peak < opp2->bandwidth[i].peak ? -1 : 1; }
/* Same bw for both OPPs */ return 0;}
/* * Returns * 0: opp1 == opp2 * 1: opp1 > opp2 * -1: opp1 < opp2 */int _opp_compare_key(struct opp_table *opp_table, struct dev_pm_opp *opp1, struct dev_pm_opp *opp2){ int ret;
ret = _opp_compare_rate(opp_table, opp1, opp2); if (ret) return ret;
ret = _opp_compare_bw(opp_table, opp1, opp2); if (ret) return ret;
if (opp1->level != opp2->level) return opp1->level < opp2->level ? -1 : 1;
/* Duplicate OPPs */ return 0;}
static int _opp_is_duplicate(struct device *dev, struct dev_pm_opp *new_opp, struct opp_table *opp_table, struct list_head **head){ struct dev_pm_opp *opp; int opp_cmp;
/* * Insert new OPP in order of increasing frequency and discard if * already present. * * Need to use &opp_table->opp_list in the condition part of the 'for' * loop, don't replace it with head otherwise it will become an infinite * loop. */ list_for_each_entry(opp, &opp_table->opp_list, node) { opp_cmp = _opp_compare_key(opp_table, new_opp, opp); if (opp_cmp > 0) { *head = &opp->node; continue; }
if (opp_cmp < 0) return 0;
/* Duplicate OPPs */ dev_warn(dev, "%s: duplicate OPPs detected. Existing: freq: %lu, volt: %lu, enabled: %d. New: freq: %lu, volt: %lu, enabled: %d\n", __func__, opp->rates[0], opp->supplies[0].u_volt, opp->available, new_opp->rates[0], new_opp->supplies[0].u_volt, new_opp->available);
/* Should we compare voltages for all regulators here ? */ return opp->available && new_opp->supplies[0].u_volt == opp->supplies[0].u_volt ? -EBUSY : -EEXIST; }
return 0;}
void _required_opps_available(struct dev_pm_opp *opp, int count){ int i;
for (i = 0; i < count; i++) { if (opp->required_opps[i]->available) continue;
opp->available = false; pr_warn("%s: OPP not supported by required OPP %pOF (%lu)\n", __func__, opp->required_opps[i]->np, opp->rates[0]); return; }}
/* * Returns: * 0: On success. And appropriate error message for duplicate OPPs. * -EBUSY: For OPP with same freq/volt and is available. The callers of * _opp_add() must return 0 if they receive -EBUSY from it. This is to make * sure we don't print error messages unnecessarily if different parts of * kernel try to initialize the OPP table. * -EEXIST: For OPP with same freq but different volt or is unavailable. This * should be considered an error by the callers of _opp_add(). */int _opp_add(struct device *dev, struct dev_pm_opp *new_opp, struct opp_table *opp_table){ struct list_head *head; int ret;
scoped_guard(mutex, &opp_table->lock) { head = &opp_table->opp_list;
ret = _opp_is_duplicate(dev, new_opp, opp_table, &head); if (ret) return ret;
list_add(&new_opp->node, head); new_opp->opp_table = opp_table; kref_init(&new_opp->kref); }
opp_debug_create_one(new_opp, opp_table);
if (!_opp_supported_by_regulators(new_opp, opp_table)) { new_opp->available = false; dev_warn(dev, "%s: OPP not supported by regulators (%lu)\n", __func__, new_opp->rates[0]); }
/* required-opps not fully initialized yet */ if (lazy_linking_pending(opp_table)) return 0;
_required_opps_available(new_opp, opp_table->required_opp_count);
return 0;}
/** * _opp_add_v1() - Allocate a OPP based on v1 bindings. * @opp_table: OPP table * @dev: device for which we do this operation * @data: The OPP data for the OPP to add * @dynamic: Dynamically added OPPs. * * This function adds an opp definition to the opp table and returns status. * The opp is made available by default and it can be controlled using * dev_pm_opp_enable/disable functions and may be removed by dev_pm_opp_remove. * * NOTE: "dynamic" parameter impacts OPPs added by the dev_pm_opp_of_add_table * and freed by dev_pm_opp_of_remove_table. * * Return: * 0 On success OR * Duplicate OPPs (both freq and volt are same) and opp->available * -EEXIST Freq are same and volt are different OR * Duplicate OPPs (both freq and volt are same) and !opp->available * -ENOMEM Memory allocation failure */int _opp_add_v1(struct opp_table *opp_table, struct device *dev, struct dev_pm_opp_data *data, bool dynamic){ struct dev_pm_opp *new_opp; unsigned long tol, u_volt = data->u_volt; int ret;
if (!assert_single_clk(opp_table, 0)) return -EINVAL;
new_opp = _opp_allocate(opp_table); if (!new_opp) return -ENOMEM;
/* populate the opp table */ new_opp->rates[0] = data->freq; new_opp->level = data->level; new_opp->turbo = data->turbo; tol = u_volt * opp_table->voltage_tolerance_v1 / 100; new_opp->supplies[0].u_volt = u_volt; new_opp->supplies[0].u_volt_min = u_volt - tol; new_opp->supplies[0].u_volt_max = u_volt + tol; new_opp->available = true; new_opp->dynamic = dynamic;
ret = _opp_add(dev, new_opp, opp_table); if (ret) { /* Don't return error for duplicate OPPs */ if (ret == -EBUSY) ret = 0; goto free_opp; }
/* * Notify the changes in the availability of the operable * frequency/voltage list. */ blocking_notifier_call_chain(&opp_table->head, OPP_EVENT_ADD, new_opp); return 0;
free_opp: _opp_free(new_opp);
return ret;}
/* * This is required only for the V2 bindings, and it enables a platform to * specify the hierarchy of versions it supports. OPP layer will then enable * OPPs, which are available for those versions, based on its 'opp-supported-hw' * property. */static int _opp_set_supported_hw(struct opp_table *opp_table, const u32 *versions, unsigned int count){ /* Another CPU that shares the OPP table has set the property ? */ if (opp_table->supported_hw) return 0;
opp_table->supported_hw = kmemdup_array(versions, count, sizeof(*versions), GFP_KERNEL); if (!opp_table->supported_hw) return -ENOMEM;
opp_table->supported_hw_count = count;
return 0;}
static void _opp_put_supported_hw(struct opp_table *opp_table){ if (opp_table->supported_hw) { kfree(opp_table->supported_hw); opp_table->supported_hw = NULL; opp_table->supported_hw_count = 0; }}
/* * This is required only for the V2 bindings, and it enables a platform to * specify the extn to be used for certain property names. The properties to * which the extension will apply are opp-microvolt and opp-microamp. OPP core * should postfix the property name with -<name> while looking for them. */static int _opp_set_prop_name(struct opp_table *opp_table, const char *name){ /* Another CPU that shares the OPP table has set the property ? */ if (!opp_table->prop_name) { opp_table->prop_name = kstrdup(name, GFP_KERNEL); if (!opp_table->prop_name) return -ENOMEM; }
return 0;}
static void _opp_put_prop_name(struct opp_table *opp_table){ if (opp_table->prop_name) { kfree(opp_table->prop_name); opp_table->prop_name = NULL; }}
/* * In order to support OPP switching, OPP layer needs to know the name of the * device's regulators, as the core would be required to switch voltages as * well. * * This must be called before any OPPs are initialized for the device. */static int _opp_set_regulators(struct opp_table *opp_table, struct device *dev, const char * const names[]){ const char * const *temp = names; struct regulator *reg; int count = 0, ret, i;
/* Count number of regulators */ while (*temp++) count++;
if (!count) return -EINVAL;
/* Another CPU that shares the OPP table has set the regulators ? */ if (opp_table->regulators) return 0;
opp_table->regulators = kmalloc_objs(*opp_table->regulators, count); if (!opp_table->regulators) return -ENOMEM;
for (i = 0; i < count; i++) { reg = regulator_get_optional(dev, names[i]); if (IS_ERR(reg)) { ret = dev_err_probe(dev, PTR_ERR(reg), "%s: no regulator (%s) found\n", __func__, names[i]); goto free_regulators; }
opp_table->regulators[i] = reg; }
opp_table->regulator_count = count;
/* Set generic config_regulators() for single regulators here */ if (count == 1) opp_table->config_regulators = _opp_config_regulator_single;
return 0;
free_regulators: while (i != 0) regulator_put(opp_table->regulators[--i]);
kfree(opp_table->regulators); opp_table->regulators = NULL; opp_table->regulator_count = -1;
return ret;}
static void _opp_put_regulators(struct opp_table *opp_table){ int i;
if (!opp_table->regulators) return;
if (opp_table->enabled) { for (i = opp_table->regulator_count - 1; i >= 0; i--) regulator_disable(opp_table->regulators[i]); }
for (i = opp_table->regulator_count - 1; i >= 0; i--) regulator_put(opp_table->regulators[i]);
kfree(opp_table->regulators); opp_table->regulators = NULL; opp_table->regulator_count = -1;}
static void _put_clks(struct opp_table *opp_table, int count){ int i;
for (i = count - 1; i >= 0; i--) clk_put(opp_table->clks[i]);
kfree(opp_table->clks); opp_table->clks = NULL;}
/* * In order to support OPP switching, OPP layer needs to get pointers to the * clocks for the device. Simple cases work fine without using this routine * (i.e. by passing connection-id as NULL), but for a device with multiple * clocks available, the OPP core needs to know the exact names of the clks to * use. * * This must be called before any OPPs are initialized for the device. */static int _opp_set_clknames(struct opp_table *opp_table, struct device *dev, const char * const names[], config_clks_t config_clks){ const char * const *temp = names; int count = 0, ret, i; struct clk *clk;
/* Count number of clks */ while (*temp++) count++;
/* * This is a special case where we have a single clock, whose connection * id name is NULL, i.e. first two entries are NULL in the array. */ if (!count && !names[1]) count = 1;
/* Fail early for invalid configurations */ if (!count || (!config_clks && count > 1)) return -EINVAL;
/* Another CPU that shares the OPP table has set the clkname ? */ if (opp_table->clks) return 0;
opp_table->clks = kmalloc_objs(*opp_table->clks, count); if (!opp_table->clks) return -ENOMEM;
/* Find clks for the device */ for (i = 0; i < count; i++) { clk = clk_get(dev, names[i]); if (IS_ERR(clk)) { ret = dev_err_probe(dev, PTR_ERR(clk), "%s: Couldn't find clock with name: %s\n", __func__, names[i]); goto free_clks; }
opp_table->clks[i] = clk; }
opp_table->clk_count = count; opp_table->config_clks = config_clks;
/* Set generic single clk set here */ if (count == 1) { if (!opp_table->config_clks) opp_table->config_clks = _opp_config_clk_single;
/* * We could have just dropped the "clk" field and used "clks" * everywhere. Instead we kept the "clk" field around for * following reasons: * * - avoiding clks[0] everywhere else. * - not running single clk helpers for multiple clk usecase by * mistake. * * Since this is single-clk case, just update the clk pointer * too. */ opp_table->clk = opp_table->clks[0]; }
return 0;
free_clks: _put_clks(opp_table, i); return ret;}
static void _opp_put_clknames(struct opp_table *opp_table){ if (!opp_table->clks) return;
opp_table->config_clks = NULL; opp_table->clk = ERR_PTR(-ENODEV);
_put_clks(opp_table, opp_table->clk_count);}
/* * This is useful to support platforms with multiple regulators per device. * * This must be called before any OPPs are initialized for the device. */static int _opp_set_config_regulators_helper(struct opp_table *opp_table, struct device *dev, config_regulators_t config_regulators){ /* Another CPU that shares the OPP table has set the helper ? */ if (!opp_table->config_regulators) opp_table->config_regulators = config_regulators;
return 0;}
static void _opp_put_config_regulators_helper(struct opp_table *opp_table){ if (opp_table->config_regulators) opp_table->config_regulators = NULL;}
static int _opp_set_required_dev(struct opp_table *opp_table, struct device *dev, struct device *required_dev, unsigned int index){ struct opp_table *required_table, *pd_table; struct device *gdev;
/* Genpd core takes care of propagation to parent genpd */ if (opp_table->is_genpd) { dev_err(dev, "%s: Operation not supported for genpds\n", __func__); return -EOPNOTSUPP; }
if (index >= opp_table->required_opp_count) { dev_err(dev, "Required OPPs not available, can't set required devs\n"); return -EINVAL; }
required_table = opp_table->required_opp_tables[index]; if (IS_ERR(required_table)) { dev_err(dev, "Missing OPP table, unable to set the required devs\n"); return -ENODEV; }
/* * The required_opp_tables parsing is not perfect, as the OPP core does * the parsing solely based on the DT node pointers. The core sets the * required_opp_tables entry to the first OPP table in the "opp_tables" * list, that matches with the node pointer. * * If the target DT OPP table is used by multiple devices and they all * create separate instances of 'struct opp_table' from it, then it is * possible that the required_opp_tables entry may be set to the * incorrect sibling device. * * Cross check it again and fix if required. */ gdev = dev_to_genpd_dev(required_dev); if (IS_ERR(gdev)) return PTR_ERR(gdev);
pd_table = _find_opp_table(gdev); if (!IS_ERR(pd_table)) { if (pd_table != required_table) { dev_pm_opp_put_opp_table(required_table); opp_table->required_opp_tables[index] = pd_table; } else { dev_pm_opp_put_opp_table(pd_table); } }
opp_table->required_devs[index] = required_dev; return 0;}
static void _opp_put_required_dev(struct opp_table *opp_table, unsigned int index){ opp_table->required_devs[index] = NULL;}
static void _opp_clear_config(struct opp_config_data *data){ if (data->flags & OPP_CONFIG_REQUIRED_DEV) _opp_put_required_dev(data->opp_table, data->required_dev_index); if (data->flags & OPP_CONFIG_REGULATOR) _opp_put_regulators(data->opp_table); if (data->flags & OPP_CONFIG_SUPPORTED_HW) _opp_put_supported_hw(data->opp_table); if (data->flags & OPP_CONFIG_REGULATOR_HELPER) _opp_put_config_regulators_helper(data->opp_table); if (data->flags & OPP_CONFIG_PROP_NAME) _opp_put_prop_name(data->opp_table); if (data->flags & OPP_CONFIG_CLK) _opp_put_clknames(data->opp_table);
dev_pm_opp_put_opp_table(data->opp_table); kfree(data);}
/** * dev_pm_opp_set_config() - Set OPP configuration for the device. * @dev: Device for which configuration is being set. * @config: OPP configuration. * * This allows all device OPP configurations to be performed at once. * * This must be called before any OPPs are initialized for the device. This may * be called multiple times for the same OPP table, for example once for each * CPU that share the same table. This must be balanced by the same number of * calls to dev_pm_opp_clear_config() in order to free the OPP table properly. * * This returns a token to the caller, which must be passed to * dev_pm_opp_clear_config() to free the resources later. The value of the * returned token will be >= 1 for success and negative for errors. The minimum * value of 1 is chosen here to make it easy for callers to manage the resource. */int dev_pm_opp_set_config(struct device *dev, struct dev_pm_opp_config *config){ struct opp_table *opp_table; struct opp_config_data *data; unsigned int id; int ret;
data = kmalloc_obj(*data); if (!data) return -ENOMEM;
opp_table = _add_opp_table(dev, false); if (IS_ERR(opp_table)) { kfree(data); return PTR_ERR(opp_table); }
data->opp_table = opp_table; data->flags = 0;
/* This should be called before OPPs are initialized */ if (WARN_ON(!list_empty(&opp_table->opp_list))) { ret = -EBUSY; goto err; }
/* Configure clocks */ if (config->clk_names) { ret = _opp_set_clknames(opp_table, dev, config->clk_names, config->config_clks); if (ret) goto err;
data->flags |= OPP_CONFIG_CLK; } else if (config->config_clks) { /* Don't allow config callback without clocks */ ret = -EINVAL; goto err; }
/* Configure property names */ if (config->prop_name) { ret = _opp_set_prop_name(opp_table, config->prop_name); if (ret) goto err;
data->flags |= OPP_CONFIG_PROP_NAME; }
/* Configure config_regulators helper */ if (config->config_regulators) { ret = _opp_set_config_regulators_helper(opp_table, dev, config->config_regulators); if (ret) goto err;
data->flags |= OPP_CONFIG_REGULATOR_HELPER; }
/* Configure supported hardware */ if (config->supported_hw) { ret = _opp_set_supported_hw(opp_table, config->supported_hw, config->supported_hw_count); if (ret) goto err;
data->flags |= OPP_CONFIG_SUPPORTED_HW; }
/* Configure supplies */ if (config->regulator_names) { ret = _opp_set_regulators(opp_table, dev, config->regulator_names); if (ret) goto err;
data->flags |= OPP_CONFIG_REGULATOR; }
if (config->required_dev) { ret = _opp_set_required_dev(opp_table, dev, config->required_dev, config->required_dev_index); if (ret) goto err;
data->required_dev_index = config->required_dev_index; data->flags |= OPP_CONFIG_REQUIRED_DEV; }
ret = xa_alloc(&opp_configs, &id, data, XA_LIMIT(1, INT_MAX), GFP_KERNEL); if (ret) goto err;
return id;
err: _opp_clear_config(data); return ret;}EXPORT_SYMBOL_GPL(dev_pm_opp_set_config);
/** * dev_pm_opp_clear_config() - Releases resources blocked for OPP configuration. * @token: The token returned by dev_pm_opp_set_config() previously. * * This allows all device OPP configurations to be cleared at once. This must be * called once for each call made to dev_pm_opp_set_config(), in order to free * the OPPs properly. * * Currently the first call itself ends up freeing all the OPP configurations, * while the later ones only drop the OPP table reference. This works well for * now as we would never want to use an half initialized OPP table and want to * remove the configurations together. */void dev_pm_opp_clear_config(int token){ struct opp_config_data *data;
/* * This lets the callers call this unconditionally and keep their code * simple. */ if (unlikely(token <= 0)) return;
data = xa_erase(&opp_configs, token); if (WARN_ON(!data)) return;
_opp_clear_config(data);}EXPORT_SYMBOL_GPL(dev_pm_opp_clear_config);
static void devm_pm_opp_config_release(void *token){ dev_pm_opp_clear_config((unsigned long)token);}
/** * devm_pm_opp_set_config() - Set OPP configuration for the device. * @dev: Device for which configuration is being set. * @config: OPP configuration. * * This allows all device OPP configurations to be performed at once. * This is a resource-managed variant of dev_pm_opp_set_config(). * * Return: 0 on success and errorno otherwise. */int devm_pm_opp_set_config(struct device *dev, struct dev_pm_opp_config *config){ int token = dev_pm_opp_set_config(dev, config);
if (token < 0) return token;
return devm_add_action_or_reset(dev, devm_pm_opp_config_release, (void *) ((unsigned long) token));}EXPORT_SYMBOL_GPL(devm_pm_opp_set_config);
/** * dev_pm_opp_xlate_required_opp() - Find required OPP for @src_table OPP. * @src_table: OPP table which has @dst_table as one of its required OPP table. * @dst_table: Required OPP table of the @src_table. * @src_opp: OPP from the @src_table. * * This function returns the OPP (present in @dst_table) pointed out by the * "required-opps" property of the @src_opp (present in @src_table). * * The callers are required to call dev_pm_opp_put() for the returned OPP after * use. * * Return: pointer to 'struct dev_pm_opp' on success and errorno otherwise. */struct dev_pm_opp *dev_pm_opp_xlate_required_opp(struct opp_table *src_table, struct opp_table *dst_table, struct dev_pm_opp *src_opp){ struct dev_pm_opp *opp, *dest_opp = ERR_PTR(-ENODEV); int i;
if (!src_table || !dst_table || !src_opp || !src_table->required_opp_tables) return ERR_PTR(-EINVAL);
/* required-opps not fully initialized yet */ if (lazy_linking_pending(src_table)) return ERR_PTR(-EBUSY);
for (i = 0; i < src_table->required_opp_count; i++) { if (src_table->required_opp_tables[i] != dst_table) continue;
scoped_guard(mutex, &src_table->lock) { list_for_each_entry(opp, &src_table->opp_list, node) { if (opp == src_opp) { dest_opp = dev_pm_opp_get(opp->required_opps[i]); break; } } } break; }
if (IS_ERR(dest_opp)) { pr_err("%s: Couldn't find matching OPP (%p: %p)\n", __func__, src_table, dst_table); }
return dest_opp;}EXPORT_SYMBOL_GPL(dev_pm_opp_xlate_required_opp);
/** * dev_pm_opp_xlate_performance_state() - Find required OPP's pstate for src_table. * @src_table: OPP table which has dst_table as one of its required OPP table. * @dst_table: Required OPP table of the src_table. * @pstate: Current performance state of the src_table. * * This Returns pstate of the OPP (present in @dst_table) pointed out by the * "required-opps" property of the OPP (present in @src_table) which has * performance state set to @pstate. * * Return: Zero or positive performance state on success, otherwise negative * value on errors. */int dev_pm_opp_xlate_performance_state(struct opp_table *src_table, struct opp_table *dst_table, unsigned int pstate){ struct dev_pm_opp *opp; int i;
/* * Normally the src_table will have the "required_opps" property set to * point to one of the OPPs in the dst_table, but in some cases the * genpd and its master have one to one mapping of performance states * and so none of them have the "required-opps" property set. Return the * pstate of the src_table as it is in such cases. */ if (!src_table || !src_table->required_opp_count) return pstate;
/* Both OPP tables must belong to genpds */ if (unlikely(!src_table->is_genpd || !dst_table->is_genpd)) { pr_err("%s: Performance state is only valid for genpds.\n", __func__); return -EINVAL; }
/* required-opps not fully initialized yet */ if (lazy_linking_pending(src_table)) return -EBUSY;
for (i = 0; i < src_table->required_opp_count; i++) { if (src_table->required_opp_tables[i]->np == dst_table->np) break; }
if (unlikely(i == src_table->required_opp_count)) { pr_err("%s: Couldn't find matching OPP table (%p: %p)\n", __func__, src_table, dst_table); return -EINVAL; }
guard(mutex)(&src_table->lock);
list_for_each_entry(opp, &src_table->opp_list, node) { if (opp->level == pstate) return opp->required_opps[i]->level; }
pr_err("%s: Couldn't find matching OPP (%p: %p)\n", __func__, src_table, dst_table);
return -EINVAL;}
/** * dev_pm_opp_add_dynamic() - Add an OPP table from a table definitions * @dev: The device for which we do this operation * @data: The OPP data for the OPP to add * * This function adds an opp definition to the opp table and returns status. * The opp is made available by default and it can be controlled using * dev_pm_opp_enable/disable functions. * * Return: * 0 On success OR * Duplicate OPPs (both freq and volt are same) and opp->available * -EEXIST Freq are same and volt are different OR * Duplicate OPPs (both freq and volt are same) and !opp->available * -ENOMEM Memory allocation failure */int dev_pm_opp_add_dynamic(struct device *dev, struct dev_pm_opp_data *data){ struct opp_table *opp_table; int ret;
opp_table = _add_opp_table(dev, true); if (IS_ERR(opp_table)) return PTR_ERR(opp_table);
/* Fix regulator count for dynamic OPPs */ opp_table->regulator_count = 1;
ret = _opp_add_v1(opp_table, dev, data, true); if (ret) dev_pm_opp_put_opp_table(opp_table);
return ret;}EXPORT_SYMBOL_GPL(dev_pm_opp_add_dynamic);
/** * _opp_set_availability() - helper to set the availability of an opp * @dev: device for which we do this operation * @freq: OPP frequency to modify availability * @availability_req: availability status requested for this opp * * Set the availability of an OPP, opp_{enable,disable} share a common logic * which is isolated here. * * Return: -EINVAL for bad pointers, -ENOMEM if no memory available for the * copy operation, returns 0 if no modification was done OR modification was * successful. */static int _opp_set_availability(struct device *dev, unsigned long freq, bool availability_req){ /* Find the opp_table */ struct opp_table *opp_table __free(put_opp_table) = _find_opp_table(dev); struct dev_pm_opp *opp __free(put_opp) = ERR_PTR(-ENODEV), *tmp_opp;
if (IS_ERR(opp_table)) { dev_warn(dev, "%s: Device OPP not found (%pe)\n", __func__, opp_table); return PTR_ERR(opp_table); }
if (!assert_single_clk(opp_table, 0)) return -EINVAL;
scoped_guard(mutex, &opp_table->lock) { /* Do we have the frequency? */ list_for_each_entry(tmp_opp, &opp_table->opp_list, node) { if (tmp_opp->rates[0] == freq) { opp = dev_pm_opp_get(tmp_opp);
/* Is update really needed? */ if (opp->available == availability_req) return 0;
opp->available = availability_req; break; } } }
if (IS_ERR(opp)) return PTR_ERR(opp);
/* Notify the change of the OPP availability */ if (availability_req) blocking_notifier_call_chain(&opp_table->head, OPP_EVENT_ENABLE, opp); else blocking_notifier_call_chain(&opp_table->head, OPP_EVENT_DISABLE, opp);
return 0;}
/** * dev_pm_opp_adjust_voltage() - helper to change the voltage of an OPP * @dev: device for which we do this operation * @freq: OPP frequency to adjust voltage of * @u_volt: new OPP target voltage * @u_volt_min: new OPP min voltage * @u_volt_max: new OPP max voltage * * Return: -EINVAL for bad pointers, -ENOMEM if no memory available for the * copy operation, returns 0 if no modifcation was done OR modification was * successful. */int dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq, unsigned long u_volt, unsigned long u_volt_min, unsigned long u_volt_max)
{ /* Find the opp_table */ struct opp_table *opp_table __free(put_opp_table) = _find_opp_table(dev); struct dev_pm_opp *opp __free(put_opp) = ERR_PTR(-ENODEV), *tmp_opp; int r;
if (IS_ERR(opp_table)) { r = PTR_ERR(opp_table); dev_warn(dev, "%s: Device OPP not found (%d)\n", __func__, r); return r; }
if (!assert_single_clk(opp_table, 0)) return -EINVAL;
scoped_guard(mutex, &opp_table->lock) { /* Do we have the frequency? */ list_for_each_entry(tmp_opp, &opp_table->opp_list, node) { if (tmp_opp->rates[0] == freq) { opp = dev_pm_opp_get(tmp_opp);
/* Is update really needed? */ if (opp->supplies->u_volt == u_volt) return 0;
opp->supplies->u_volt = u_volt; opp->supplies->u_volt_min = u_volt_min; opp->supplies->u_volt_max = u_volt_max;
break; } } }
if (IS_ERR(opp)) return PTR_ERR(opp);
/* Notify the voltage change of the OPP */ blocking_notifier_call_chain(&opp_table->head, OPP_EVENT_ADJUST_VOLTAGE, opp);
return 0;}EXPORT_SYMBOL_GPL(dev_pm_opp_adjust_voltage);
/** * dev_pm_opp_sync_regulators() - Sync state of voltage regulators * @dev: device for which we do this operation * * Sync voltage state of the OPP table regulators. * * Return: 0 on success or a negative error value. */int dev_pm_opp_sync_regulators(struct device *dev){ struct regulator *reg; int ret, i;
/* Device may not have OPP table */ struct opp_table *opp_table __free(put_opp_table) = _find_opp_table(dev);
if (IS_ERR(opp_table)) return 0;
/* Regulator may not be required for the device */ if (unlikely(!opp_table->regulators)) return 0;
/* Nothing to sync if voltage wasn't changed */ if (!opp_table->enabled) return 0;
for (i = 0; i < opp_table->regulator_count; i++) { reg = opp_table->regulators[i]; ret = regulator_sync_voltage(reg); if (ret) return ret; }
return 0;}EXPORT_SYMBOL_GPL(dev_pm_opp_sync_regulators);
/** * dev_pm_opp_enable() - Enable a specific OPP * @dev: device for which we do this operation * @freq: OPP frequency to enable * * Enables a provided opp. If the operation is valid, this returns 0, else the * corresponding error value. It is meant to be used for users an OPP available * after being temporarily made unavailable with dev_pm_opp_disable. * * Return: -EINVAL for bad pointers, -ENOMEM if no memory available for the * copy operation, returns 0 if no modification was done OR modification was * successful. */int dev_pm_opp_enable(struct device *dev, unsigned long freq){ return _opp_set_availability(dev, freq, true);}EXPORT_SYMBOL_GPL(dev_pm_opp_enable);
/** * dev_pm_opp_disable() - Disable a specific OPP * @dev: device for which we do this operation * @freq: OPP frequency to disable * * Disables a provided opp. If the operation is valid, this returns * 0, else the corresponding error value. It is meant to be a temporary * control by users to make this OPP not available until the circumstances are * right to make it available again (with a call to dev_pm_opp_enable). * * Return: -EINVAL for bad pointers, -ENOMEM if no memory available for the * copy operation, returns 0 if no modification was done OR modification was * successful. */int dev_pm_opp_disable(struct device *dev, unsigned long freq){ return _opp_set_availability(dev, freq, false);}EXPORT_SYMBOL_GPL(dev_pm_opp_disable);
/** * dev_pm_opp_register_notifier() - Register OPP notifier for the device * @dev: Device for which notifier needs to be registered * @nb: Notifier block to be registered * * Return: 0 on success or a negative error value. */int dev_pm_opp_register_notifier(struct device *dev, struct notifier_block *nb){ struct opp_table *opp_table __free(put_opp_table) = _find_opp_table(dev);
if (IS_ERR(opp_table)) return PTR_ERR(opp_table);
return blocking_notifier_chain_register(&opp_table->head, nb);}EXPORT_SYMBOL(dev_pm_opp_register_notifier);
/** * dev_pm_opp_unregister_notifier() - Unregister OPP notifier for the device * @dev: Device for which notifier needs to be unregistered * @nb: Notifier block to be unregistered * * Return: 0 on success or a negative error value. */int dev_pm_opp_unregister_notifier(struct device *dev, struct notifier_block *nb){ struct opp_table *opp_table __free(put_opp_table) = _find_opp_table(dev);
if (IS_ERR(opp_table)) return PTR_ERR(opp_table);
return blocking_notifier_chain_unregister(&opp_table->head, nb);}EXPORT_SYMBOL(dev_pm_opp_unregister_notifier);
/** * dev_pm_opp_remove_table() - Free all OPPs associated with the device * @dev: device pointer used to lookup OPP table. * * Free both OPPs created using static entries present in DT and the * dynamically added entries. */void dev_pm_opp_remove_table(struct device *dev){ /* Check for existing table for 'dev' */ struct opp_table *opp_table __free(put_opp_table) = _find_opp_table(dev);
if (IS_ERR(opp_table)) { int error = PTR_ERR(opp_table);
if (error != -ENODEV) WARN(1, "%s: opp_table: %d\n", IS_ERR_OR_NULL(dev) ? "Invalid device" : dev_name(dev), error); return; }
/* * Drop the extra reference only if the OPP table was successfully added * with dev_pm_opp_of_add_table() earlier. **/ if (_opp_remove_all_static(opp_table)) dev_pm_opp_put_opp_table(opp_table);}EXPORT_SYMBOL_GPL(dev_pm_opp_remove_table);