Something went wrong. Try again.
(I'm so sorry!) Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel os linux
Something went wrong. Try again.
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118// SPDX-License-Identifier: GPL-2.0-only/* * Support for the S1 button on Routerboard 532 * * Copyright (C) 2009 Phil Sutter <n0-1@freewrt.org> */
#include <linux/input.h>#include <linux/module.h>#include <linux/platform_device.h>#include <linux/gpio/consumer.h>
#include <asm/mach-rc32434/gpio.h>#include <asm/mach-rc32434/rb.h>
#define DRV_NAME "rb532-button"
#define RB532_BTN_RATE 100 /* msec */#define RB532_BTN_KSYM BTN_0
/** * struct rb532_button - RB532 button information * @gpio: GPIO connected to the button */struct rb532_button { struct gpio_desc *gpio;};
/* The S1 button state is provided by GPIO pin 1. But as this * pin is also used for uart input as alternate function, the * operational modes must be switched first: * 1) disable uart using set_latch_u5() * 2) turn off alternate function implicitly through * gpio_direction_input() * 3) read the GPIO's current value * 4) undo step 2 by enabling alternate function (in this * mode the GPIO direction is fixed, so no change needed) * 5) turn on uart again * The GPIO value occurs to be inverted, so pin high means * button is not pressed. */static bool rb532_button_pressed(struct rb532_button *button){ int val;
set_latch_u5(0, LO_FOFF); gpiod_direction_input(button->gpio);
val = gpiod_get_value(button->gpio);
rb532_gpio_set_func(GPIO_BTN_S1); set_latch_u5(LO_FOFF, 0);
return val;}
static void rb532_button_poll(struct input_dev *input){ struct rb532_button *button = input_get_drvdata(input);
input_report_key(input, RB532_BTN_KSYM, rb532_button_pressed(button)); input_sync(input);}
static int rb532_button_probe(struct platform_device *pdev){ struct rb532_button *button; struct input_dev *input; int error;
button = devm_kzalloc(&pdev->dev, sizeof(*button), GFP_KERNEL); if (!button) return -ENOMEM;
button->gpio = devm_gpiod_get(&pdev->dev, "button", GPIOD_IN); if (IS_ERR(button->gpio)) return dev_err_probe(&pdev->dev, PTR_ERR(button->gpio), "error getting button GPIO\n");
input = devm_input_allocate_device(&pdev->dev); if (!input) return -ENOMEM; input_set_drvdata(input, button);
input->name = "rb532 button"; input->phys = "rb532/button0"; input->id.bustype = BUS_HOST;
input_set_capability(input, EV_KEY, RB532_BTN_KSYM);
error = input_setup_polling(input, rb532_button_poll); if (error) return error;
input_set_poll_interval(input, RB532_BTN_RATE);
error = input_register_device(input); if (error) return error;
platform_set_drvdata(pdev, button);
return 0;}
static struct platform_driver rb532_button_driver = { .probe = rb532_button_probe, .driver = { .name = DRV_NAME, },};module_platform_driver(rb532_button_driver);
MODULE_AUTHOR("Phil Sutter <n0-1@freewrt.org>");MODULE_LICENSE("GPL");MODULE_DESCRIPTION("Support for S1 button on Routerboard 532");MODULE_ALIAS("platform:" DRV_NAME);