# Copy to the boot partition as `network-config` with the real password.
# NOTE (hardware): the Edimax EW-7811Un (rtl8192cu driver) CANNOT associate
# with WPA2/WPA3 transition-mode networks — the router must be set to
# WPA2-only or the Pi will scan forever with CONN_FAILED auth errors.
# The dongle is 2.4 GHz only. Its rtl8xxxu fallback driver does not support
# this chip — do not blacklist rtl8192cu.
network:
  version: 2
  wifis:
    wlan0:
      dhcp4: true
      optional: true
      regulatory-domain: US
      access-points:
        "Whid":
          password: "REPLACE_WITH_WIFI_PASSWORD_OR_64HEX_PSK"